CAS: 33089-61-1
Purity: 98%
Molecular Formula: C19H23N3
Molecular Weight: 293.41
EINECS: 251-375-4
Storage Period: 2 years
Synonyms: 33089-61-1Amitraz12.5%ecinveterinarymedicine; n’-(2,4-dimethylphenyl)-n-(((2,4-dimethylphenyl)imino)methyl)-n-methylmethan; N’-(2,4-Dimethylphenyl)-N-[[(2,4-dimethylphenyl-imino]methyl]-N-methylmethanimidamide,N-Methylbis(2,4-xylyliminoethyl)amine; n-methyl-bis(2,4-xylyliminomethyl)amine; r.d.27419; TAKTIC; SENDER; RACET
Amitraz CAS 33089-61-1 is appearance is light yellow or brown liquid, density is 1.090～1.105, pH value is less than 1, non-flammable, corrosive to metals. Pure product is white needle-shaped crystals, melting point is 163～165℃, easily soluble in water, aqueous solution is chemically acidic, slightly soluble in low molecular weight alcohol, insoluble in organic solvents such as benzene and petroleum ether. Stable to light and heat. It has contact killing and fumigation effects on pest mites, and is effective against all stages of Tetranychus mites, and has better efficacy at high temperature (above 22℃).
| Item | Resultado |
| Aparência | Light yellow crystals |
| Conteúdo | 98%min |
1. Amitraz CAS 33089-61-1 is a broad-spectrum acaricide, which mainly acts as a contact miticide, and also has stomach poison, fumigation, antifeedant and repellent effects. It has a certain degree of penetration and systemicity on plants, and is effective against young mites, adult mites and mite eggs. It is effective against some other miticide-resistant pest mites, and has good rapid and long-lasting effects. It is mainly used to control cotton spider mites and cotton bollworms, pink bollworms, apple and hawthorn spider mites, citrus spider mites, psyllids, rust ticks, external lice, ticks, scabies and chiggers on cattle, sheep and pigs, tea tree tarsone mites, beans and eggplant spider mites, etc. For the control of cotton spider mites, use 20% emulsion 1000-2000 times diluted spray evenly from the peak egg hatching period to the peak period of young mites. When used when spider mites and pink bollworms or cotton bollworms occur simultaneously, it can achieve a certain degree of control of insects and mites, and is safe for natural enemies such as cotton field ladybugs and lacewings. If you want to control citrus red spiders and apple spider mites, dilute 20% EC to 1000-2000 times water and spray. To control citrus rust mites, spray 20% EC to 1000-1200 times water, and spray 1500 times to control psyllids. To control ticks and mites in cattle, sheep and other livestock, spray or dip at a concentration of 50-100 mg/L.
2. Amitraz CAS 33089-61-1 is a broad-spectrum acaricide. It is mainly used for fruit trees, flowers, strawberries and other agricultural and horticultural crops. It has a good effect on controlling mites, especially citrus mites.
3. Amitraz CAS 33089-61-1 is also used to control cotton bollworms and pink bollworms; to control ticks, mites, scabies and other livestock parasites. Amitraz is a variety with better efficacy among acaricides.
25kg/drum
2,6-NAPHTHALENEDICARBOXYLIC ACID CAS 1141-38-4
CAS：1141-38-4
Purity：98%
Molecular Formula：C12H8O4
Molecular Weight：216.19
EINECS：214-527-0
Período de armazenamento：2 anos
Synonyms：NAPHTHALENE-2,6-DICARBOXYLICACID; TIMTEC-BBSBB008377; 2,6-NAPHTHALENEDICARBOXYLICACID; 2,6-NAPHTHALICACID; 2,6-NAPHTHALENEDICARBOXYLICACID,99.5+%; 2,6-NAPHTHALENEDICARBOXYLICACID98+%; Naphthalene-2,6-dicarboxylicacid,98+%; Naphthalene-2,6-dicarboxylicacid99%
White needle-shaped crystals. Melting point 310-313℃ (decomposition). Insoluble in boiling benzene, toluene and acetic acid. This product is used to manufacture polyester fibers and F-class insulation materials with high strength and excellent dyeing properties. It is an important monomer for high-performance PEN, PBN, liquid crystal polymer (LCP) and polyurethane resins, and is also an important raw material for medicines and fine chemicals.
| Item | Resultado |
| Aparência | Branco pó |
| Conteúdo | 98%min |
1. Polyester fiber: 2,6-naphthalene dicarboxylic acid is used to make polyester fiber with high strength and excellent dyeing properties, especially polyethylene naphthalate (PEN).
2. Insulation material: It is an important raw material for making Class F insulation materials.
3. Liquid crystal polymer: It plays a key role in the preparation of high-performance liquid crystal polymer (LCP).
4. Pharmaceuticals and fine chemicals: As an important raw material for pharmaceuticals and fine chemicals.
25kg/drum
ETHANOLAMINE THIOGLYCOLATE CAS 126-97-6
ETHANOLAMINE THIOGLYCOLATE is an organic compound. This compound has the following properties: Appearance: Ethanolamine thioglycolate is a colorless to pale yellow solid. Solubility: It is easily soluble in water and is also soluble in alcohols and ether.
| Item | Especificações |
| Aparência | Líquido incolor |
| Heavy metal | 5 ppm max |
| Ensaio | 51%,61%,71% |
| Fe | 0.5 ppm max |
| Como | 5 ppm max |
| PH | 6.0~7.0 |
ETHANOLAMINE THIOGLYCOLATE is widely used as the main agent for perming and dyeing hair. It can also be used as a cleaning agent, rust remover, and electroplating. It can also be used as an excellent corrosion inhibitor for bromide sal completion fluids in oil exploration.
25KG/DRUM
Denatonium Benzoate CAS 3734-33-6
Denatonium benzoate is a quaternary ammonium salt formed by the combination of a quaternary ammonium cation and an inert anion such as benzoate ion or saccharin anion. Denatonium benzoate (bitter) is currently used as an aversive agent, denaturant, appetite suppressant and flavoring agent.
| ITEM | PADRÃO | RESULTADO |
| Aparência | Pó branco | Pó branco |
| Ensaio | 99.5~ 101.0% | 99.8% |
| Identificação: | ||
| A.IR Concordant with Reference | Está de acordo com | Está de acordo com |
| B.UV Concordant with Reference | Está de acordo com | Está de acordo com |
| C.Test Solution forms yellow precipitate | Está de acordo com | Está de acordo com |
| D.Denatonium Reineckate
Ponto De Fusão |
Approx 170℃ | Está de acordo com |
| Intervalo de fusão | 163~ 170℃ | 164.9~ 165.3℃ |
| PH | 6.5-7.5 | 7.15 |
| Perda por secagem | Not more than 1.0% | 0. 1% |
| Cloreto de | Not more than 0.2% | 0. 1% |
| Resíduo de ignição | Not more than 0. 1% | 0.06% |
| Conclusão | The results conforms with USP35 standards | |
25KG/DRUM
Dihydrogenated Tallow Dimethyl Ammonium Chloride D1821 CAS 61789-80-8
Dihydrogenated Tallow Dimethyl Ammonium Chloride D1821 CAS 61789-80-8 is a type of dialkyl quaternary ammonium salt that is almost insoluble in water but soluble in non-polar solvents such as ethanol or isopropanol. It appears as a colorless or pale yellow liquid or paste at room temperature.
| A substância activa % | 75%±1 |
| PH | 5-9 |
| Aparência | Slightly yellow to white paste |
| Free amine Amine salt % | ≤2 |
| umidade | 7-11 |
| Cor（Gardner） | ≤3 |
Dihydrogenated Tallow Dimethyl Ammonium Chloride D1821 is widely used in anti-static agents, fabric softeners, disinfectants, asphalt emulsifiers, acrylic fiber leveling agents, organic soil modifiers, hair finishing agents, and dye additives.
175kg/drum
CAS: 84625-61-6
Purity: 98.5.0%-101.5%
Molecular Formula: C35H38Cl2N8O4
Molecular Weight：705.63
EINECS：617-596-9
Período de armazenamento: 1 ano
Synonyms:ITRACONAZOLE-D3; ITRACONAZOLE; SPORANOX; R51211; ORICONAZOLE; TRIASPORIN; -1-ylmethyl)-1,3-dioxolan-4-yl)methoxy)phenyl)-1-piperazinyl)phenyl)-2,4-dihyd; 3h-1,2,4-triazol-3-one,4-(4-(4-(4-((2-(2,4-dichlorophenyl)-2-(1h-1,2,4-triazol
Itraconazole CAS 84625-61-6 is a synthetic triazole derivative and a broad-spectrum antifungal drug. Its antibacterial spectrum and mechanism are similar to clotrimazole, but it has strong antibacterial activity against Aspergillus. It exerts antibacterial activity by changing the permeability of fungal cell membranes, and has antibacterial activity against both shallow and deep pathogenic bacteria. Its antibacterial spectrum is wider and stronger than ketoconazole, and it can inhibit the synthesis of ergosterol on fungal cell membranes, thereby exerting antifungal effects.
| ITEM | PADRÃO |
| Aparência | White to almost white power |
| Identificação | IV |
| Optical Rotation(20°) | -0.10° to 0.10° |
| Intervalo de fusão | 166℃-170℃ |
| Perda por secagem | 0.50%max |
| Resíduo de ignição | 0.10%max |
| Ensaio | 98.5.0%-101.5% |
1.Synthetic broad-spectrum antifungal,for systemic infections caused by deep fungi.
2.Itraconazole CAS 84625-61-6 can also be used for candidiasis and aspergillosis.
25kg/drum
CAS: 26266-58-0
Pureza: 98%min
Molecular Formula: C60H108O8
Molecular Weight：957.49
EINECS：247-569-3
Período de armazenamento: 1 ano
Synonyms: SPAN(TM) 85; ARLACEL 85; Arlacelu85; anhydro-D-glucitol trioleate; Span #85 (=Sorbitan trioleate); SPAN (R) 85 HLB-VALUE 1.8; Sorbitan Trioleate (Span-85); Anhydro-D-glucitoltrioleat
Span85 is used as an emulsifier, solubilizer, and rust inhibitor in the pharmaceutical, cosmetics, textile, paint, petroleum products, and oil extraction industries.
| ITEM | PADRÃO |
| Aparência | Yellow to amber oily liquid |
| Ácido Valor | ≤15.0KOH mg/g |
| Saponificação Valor | 165~185KOH mg/g |
| Hidroxilo | 60~80KOH mg/g |
| Água | ≤2.0% |
Span emulsifiers can be used as emulsifiers in the preparation of creams, emulsions, and ointments. When used alone, stable water in oil emulsions or microemulsions can be prepared; If used in combination with different proportions of hydrophilic emulsifier Tween, various water in oil, oil in water emulsions or creams can be prepared; It can also be used as a solubilizer, wetting agent, dispersant, suspension aid, etc. Can be used for the preparation of inhalants, intramuscular injections, oral liquids, ophthalmic preparations, and topical preparations.
25kg /drum, 50kg/drum, 200 kg/drum.
CAS：91-22-5
Purity：98%
Molecular Formula：C9H7N
Molecular Weight：129.16
EINECS：202-051-6
Período de armazenamento: o armazenamento Selado
Synonyms：
1-Benzaine; 1-Benzine; Chinoleine; Quinoline,Certified; Quinoline
Quinoline CAS 91-22-5 is also called benzopyridine, azanaphthalene, is a compound of pyridine and benzene in parallel, is a heterocyclic aromatic organic compound. At room temperature, it is a colorless hygrotropic liquid with a strong odor, exposed to light, it will slowly turn pale yellow and further turn brown, the molecular formula is C9H7N, slightly soluble in water, easily soluble in ethanol, ether and many other organic solvents, there are two kinds of combination, respectively called quinoline and isoquinoline.
| ITEM | STANDARD |
| Aparência | Incolor a amarelo claro líquido |
| Quinoline | 98% |
| Água | ≤0.2% |
| Ponto de fusão | -17- -13°C(lit.) |
1. Quinoline CAS 91-22-5 is used to prepare niacin and hydroxyquinoline drugs, cyanine blue pigments and photosensitive pigments, rubber accelerators and pesticide 8-hydroxyquinoline and other products. The oral LD50 of rats was 460mg/kg.
2, Quinoline CAS 91-22-5 is used as organic synthesis reagent, alkaline shrinkage agent and solvent.
3, Quinoline CAS 91-22-5 is used as an analytical reagent, solvent, also used for vanadate and arsenate separation.
4, Quinoline CAS 91-22-5 the production of cardiotonic, can also be used in acids, solvents, preservatives, etc.; Pharmaceutical industry for the production of niacin and 8-hydroxyquinoline drugs; Printing and dyeing industry for the production of cyanine blue pigment and photosensitive pigment; Rubber industry for the production of accelerator; In agriculture, it is used to produce pesticides such as 8-hydroxyquinoline copper.
25kg/drum
PDLLA Poly(DL-lactide) CAS 51056-13-9
CAS: 51056-13-9
Pureza: 99%
Molecular Formula：(C6H8O4)n
Peso Molecular: 0
EINECS: N/A
Storage Period: 1 years
Synonyms：PDLLA，Poly(DL-lactide)，Poly（DL-lactic acid），DL-polylactide
PDLLA CAS 51056-13-9 is an amorphous polymer with a glass transition temperature of 50-60℃ and a viscosity range of 0.2-7.0dl/g. The material has been approved by the FDA and can be used as an adjuvant for medical surgical anti-adhesive mucosa, microcapsules, microspheres and implants for sustained release, and can also be used as porous scaffolds for tissue engineering cell culture and bone fixation or tissue repair materials, such as surgical sutures, implants, artificial skin, artificial blood vessels, and ophthalmic retinas.
| Item | Resultado |
| Viscosidade intrínseca | 0.2-7.0dl/g (0.1% g/mL, chloroform, 25°C) |
| Viscosity average molecular weight | 5000-70w |
| Glass transition temperature
|
50-60°C
|
| Solvente Residual | ≤70ppm |
| Residual water | ≤0.5% |
1. Medical cosmetology: PDLLA is widely used as a facial filler in the field of medical cosmetology due to its excellent biocompatibility and degradability. It can stimulate the production of skin collagen, thereby improving skin sagging, wrinkles and depressions.
2. Medical devices: PDLLA is also widely used in the field of medical devices, such as drug-loaded coatings for degradable coronary stents, surgical sutures, hemostatic clips, etc. Its good biocompatibility and degradability make these medical devices safer and more effective during use.
3. Tissue engineering: PDLLA also has important applications in the field of tissue engineering, such as bone fixation and bone repair materials, tissue engineering scaffolds, etc. Its porous structure is conducive to the attachment and growth of cells, thereby promoting tissue repair and regeneration.
4. Drug controlled release: PDLLA can also be used for drug controlled release and sustained release packaging. By combining it with drugs to make dosage forms such as microspheres or microcapsules, the slow release and sustained action of drugs can be achieved, thereby improving the efficacy and safety of drugs.
5. Degradation performance of PDLLA: PDLLA degrades relatively slowly, which enables it to provide longer-lasting therapeutic effects in clinical applications. Its degradation product is lactic acid, which is eventually metabolized into carbon dioxide and water, and is non-toxic and harmless to the human body.
1kg/bag,25kg/drum
CAS: 42373-04-6
Purity: 98%
Molecular Formula: C19H17ClN4S
Molecular Weight: 368.88
EINECS: 255-785-4
Storage Period: 2 year
Synonyms: BASACRYLREDGL; BASICRED29; CI11460; CIBASICRED29; 3-methyl-2-((1-methyl-2-phenyl-1h-indol-3-yl)azo)-thiazoliuchloride; 3-methyl-2-((1-metChemicalbookhyl-2-phenyl-1h-indol-3-yl)azo)thiazoliumchloride; 3-methyl-2-[(1-methyl-2-phenyl-1h-indol-3-yl)azo]-thiazoliuchloride;abcolbasicredgl
BASIC RED 29 is a dark red uniform powder. It is easily soluble in water and is red. When dyed on acrylic fiber, it is red, but the color is not bright. The light fastness is grade 7. The compatibility value is K=2.
| Item | Especificações |
| Dyeing Depth(O.W.F) | 0.6 |
| K.Compatible Value | 1.5 |
| PH Stable Range | 3-8 |
| Light(Xenon) | 7 |
| Change in shade | 4-5 |
| Stained on Cotton | 4-5 |
| Stained on Acrylic | 4-5 |
| Dry | 4-5 |
| Wet | 4 |
| Change in shade | 4 |
| Stained on Cotton | 4 |
| Stained on Acrylic | 4-5 |
BASIC RED 29 is mainly used for dyeing acrylic loose fiber, fiber strip and acrylic wool.
25KG/BAG
BOC-L-Asparagine CAS 7536-55-2
CAS: 7536-55-2
Purity: 98%
Molecular Formula: C9H16N2O5
Molecular Weight: 232.23
EINECS: 231-405-2
Storage Period: 2 year
Synonyms: T-BUTYLOXYCARBONYL-L-ASPARAGINE; TBOC-L-ASPARAGINE; N-TERT-BUTOXYCARBONYL-L-ASPARAGINE; N-T-BUTOXYCARBONYL-L-ASPARAGINE; N-T-BOC-L-ASPARAGINE; N2-[(1,1-Dimethylethoxy)carbonyl]-L-asparagine; NALPHA-BOC-L-ASPARAGINE; N-ALPHA-T-BOC-L-ASPARAGINE
BOC-L-Asparagine is a white crystalline substance; soluble in DMF, insoluble in petroleum ether; decomposition point is 175-180℃.
| Item | Especificações |
| Ponto de fusão | 175 °C |
| Ponto De Ebulição | 374.39°C |
| Densidade | 1.2896 |
| Índice De Refração | -7 ° |
| Ponto de inflamação | 245°C |
BOC-L-Asparagine is used in peptide synthesis as an amino acid protection monomer.
25KG/DRUM
CAS: 9007-43-6
Purity: 99.5%min
Molecular Formula: C42H52FeN8O6S2
Molecular Weight: 884.88728
EINECS: 232-700-9
Storage Period: 2 year
Synonyms: Cytochromes C from equine heart; HUMAN CYTOCHROME C;CYT-C; CYTOCHROME C; CYTOCHROME C, ACID MODIFIED; CYTOCHROME C, BOVINE; CYTOCHROME C (BOVINE HEART); CYTOCHROME C PEPTIDE MAP CONTROL
Cytochrome C has a reduced form that is a dispersed needle-shaped crystal, and an oxidized form that is a petal-shaped crystal. Both are easily soluble in water and acidic solutions. The former has a pink aqueous solution, while the latter has a dark red aqueous solution. Both are relatively stable to heat. The former is more stable than the latter, with a molecular weight of about 11000-13000.
| Item | Especificações |
| Aparência | Red or brownish red freeze-dried powder |
| Colorimetric MethodIdentification | Definite |
| High pressure chromatography | Definite |
| PH | 5.0-7.0 |
| Conteúdo | >95.0 % |
| Iron Content | 0.40—0.48% |
| 10% Aqueous Solution | Clear red solution |
| Water ContentK.F. | ≤6.0% |
| Contagem Total De Bactérias | <50c /g |
1.Cellular respiratory activating drugs. It has a rapid enzymatic action on the oxidation and reduction processes of cells in tissues. Used for tissue hypoxia caused by various causes in first aid or adjuvant therapy. Leukopenia caused by anticancer drugs, circulatory disorders of the extremities, liver diseases, and nephritis also have a certain therapeutic effect.
2.Cytochrome C is a very important electron transporter for biooxidation. It is arranged on the mitochondria and other oxidases into a respiratory chain, which is involved in the cellular respiration process. When hepatocytes are inflamed, cell membrane permeability is high, and cytochrome C can enter human cells. It can treat liver failure, increase cell oxidation and increase oxygen utilization. It is an iron-containing binding protein with an antigen.
25KG/DRUM
CAS: 50-65-7
Pureza: 99%
Molecular Formula: C13H8Cl2N2O4
Molecular Weight: 327.12
EINECS: 200-056-8
Storage Period: 2 year
Sinónimos:
Ncosamide; NICLOSAMIDPESTANAL250MG; NICLOSAMIDPESTANAL; 2-CHLORO-4-NITROHENYLAMIDE-6-CHLOROSALICYLICACID; Niclosamide1420-04-8; 5-Chloro-N-(2-chloro-4-nitrophenyl)-2-hydroxybenza; Niclosamide(baseand/orunspecifiedsalts); 5-CHLORO-N-(2-CHLORO-5-NITROPHENYL)-2-HYDROXYBENZAMIDE
Niclosamide is a White to light yellow powder, odorless and tasteless. The melting point is 225-230°C. It is insoluble in water, but soluble in hot ethanol, chloroform, cyclohexanone, ether and sodium hydroxide solution.
| Item | Especificações |
| Aparência | Branco para a luz amarela em pó |
| Ensaio | 98%-101% |
| Identity | Positivo |
| 5-chlorosalicyclic acid | ≤60 ppm |
| 2-chloro-4-nitroaniline | ≤100 ppm |
| Cloretos | ≤500 ppm |
| Substâncias relacionadas | ≤0.2% |
| Ponto de fusão | 227℃-232℃ |
| Cinzas sulfatadas | ≤0.1% |
| Perda por secagem | ≤0.5% |
1. Niclosamide, also known as p-tert-butylbenzyl chloride, can be used as an intermediate in the production of acaricides.
2. Niclosamide is used in synthesis of antiallergic drugs Anqimin and chlorpheniramine.
3. Niclosamide is used in medicine, pesticides and spices.
4. Niclosamide is used in Antiallergic drugs Anqimin, chlorpheniramine intermediates.
25KG/DRUM
Aluminium tri-sec-butoxide CAS 2269-22-9
CAS：2269-22-9
Pureza：99%
Molecular Formula：C4H13AlO
Molecular Weight：104.13
EINECS：218-871-2
Storage Period：3 years
Synonyms：
Aluminumsec-butoxide,95%,packagedunderArgoninresealablSealTMbottles; ALUMINUMs-BUTOXIDE,75%ins-butanol; ALUMINUMTRI(sec-BUTOXIDE),97%ALUMINUMTRI(sec-BUTOXIDE),97%ALUMINUMTRI(sec-BUTOXIDE),97%ALUMINUMTRI(sec-BUTOXIDE),97%; Aluminiumtri-sec-butoxid; 2-Butanol,aluminumsalt; ALUMINIUMTRI-S-BUTOXIDE; ALUMINIUMTRI-SEC-BUTANOLATE; ALUMINIUMTRI-SEC-BUTOXIDE
Aluminium tri-sec-butoxide CAS 2269-22-9 belongs to aluminum alcohol and is an important basic metal organic chemical raw material. It is widely used in organic synthesis intermediates and organic synthesis industries such as medicine and pesticides. Aluminium tri-sec-butoxide CAS 2269-22-9 can be used to prepare a nano-alumina hydrosol coating and a glass film containing rare earth ion-doped barium iodide microcrystals.
| ITEM | PADRÃO |
| Pureza % ≥ | 99.3 |
| Al,% | 10.5-12.0 |
| Density(20℃) g/cm3 | 0.92-0.97 |
| Fe,ppm | 100 |
Aluminium tri-sec-butoxide CAS 2269-22-9 is a multifunctional chemical reagent with a wide range of applications and multiple uses. The following are its main functions and application areas:
catalyst
1. Organic chemical catalyst: Aluminium tri-sec-butoxide CAS 2269-22-9 performs well in esterification, transesterification and polymerization reactions, and can significantly increase reaction rate and yield, and reduce production costs. For example, aluminum sec-butoxide has become an indispensable and important raw material in the production of chemical industrial products such as spices, flavors and plastics.
2.Friedel-Crafts reaction: Aluminium tri-sec-butoxide CAS 2269-22-9 is an excellent catalyst for Friedel-Crafts reaction, which can promote the formation of active intermediates and further react with various nucleophiles to generate a wide range of useful products.
3. Metal-organic framework (MOF) synthesis: In the field of materials science, aluminium tri-sec-butoxide CAS 2269-22-9 is used as a precursor for MOF synthesis, which can produce high-quality materials with good thermal and chemical stability. These materials are used in catalysis, gas It has broad application prospects in storage and separation.
reducing agent
1. Aluminium tri-sec-butoxide CAS 2269-22-9 can also be used as a reducing agent in organic synthesis and can reduce various functional groups, including carbonyl groups, nitro groups and alkenes. For example, the reduction of carbonyl compounds with aluminum sec-butoxide forms alcohols, while the reduction of nitro and alkenes forms amines and alkanes, respectively.
Other applications
1. Inks and coatings: Aluminium tri-sec-butoxide CAS 2269-22-9 is used as a gelling agent in the ink and coating industry. It can form stable gels with a variety of solvents and is suitable for water-based and solvent-based systems. The gel formed is highly thixotropic, transparent, and resistant to temperature and pH changes, and is considered an environmentally friendly and low-toxic compound.
2. Pharmaceutical industry: In the pharmaceutical industry, aluminium tri-sec-butoxide CAS 2269-22-9 is often used as a Lewis acid catalyst, which can efficiently catalyze the synthesis of chiral compounds, and serves as a stabilizer in pharmaceutical preparations to prevent the degradation of active pharmaceutical ingredients and extend the shelf life of drugs. Additionally, it can be used as a coagulant in vaccine production
200 kg/tambor
CAS：32986-56-4
Purity：99.3%
Molecular Formula：C18H37N5O9
Molecular Weight：467.52
EINECS：251-322-5
Período de armazenamento：2 anos
Synonyms：1-epitobramycin; 3’-deoxykanamycinb; 4-[2,6-diamino-2,3,6-trideoxy-alpha-d-glycopyranosyl]-6-[3-amino-3-deoxy-alpha; 6-trideoxy-alpha-d-ribo-hexopyranosyl-(1-4))-2-deoxy-; d-6-trideoxy-alpha-d-ribohexopyranosyl-(1-6))-2-deoxy; d-6-tyrideoxy-alpha-d-ribohexopyranosyl-(1-6))-2-deoxy; O-[3-AMINO-3-DEOXY-ALPHA-D-GLUCOPYRANOSYL-(1->6)]-O-[2,6-DIAMINO-2,3,6-TRIDEOXY-ALPHA-D-RIBOHEXOPYRANOSYL-(1->4)]-2-DEOXY-D-STREPTAMINE; O-[3-Amino-3-deoxy-α-D-glucopyranosyl-(1→6)]-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribohexopyranosyl-(1→4)]-2-deoxy-D-streptamine
Tobramycin is a colorless or slightly yellow clear solution. Tobramycin is easily soluble in water. It can remain stable for a long time in a solution at 5-37°C and pH 1-11.
| ITEM | PADRÃO |
| Pureza % ≥ | 98% |
| Potency | ≥900μG/mg |
Tobramycin is a broad-spectrum antibiotic, mainly used to treat various infections caused by sensitive bacteria. Its mechanism of action is to kill or inhibit bacterial growth by inhibiting the synthesis of bacterial proteins.
1.Antibacterial effect: Tobramycin has antibacterial effects on most Gram-negative bacteria and staphylococci, including Escherichia coli, Staphylococcus aureus, etc.
2.Anti-inflammatory effect: Tobramycin also has a certain anti-inflammatory effect, which can reduce inflammatory reactions and relieve pain.
3.Immunomodulatory effect: Tobramycin can also regulate the body’s immune function and enhance the body’s resistance.
25kg/drum
Sodium Dehydroacetate CAS 4418-26-2
CAS: 4418-26-2
Purity: 98.0-100.5%
Molecular Formula: C8H7NaO4
Molecular Weight: 190.13
EINECS: 224-580-1
Storage Period: 1 year
Synonyms: Sodium1-(3,4-dihydro-6-methyl-2,4-dioxo-2H-pyran-3-ylidene)ethanolate; SODIUM3-ACETYL-4-HYDROXY-6-METHYL-2-OXO-4(2H)-PYRANOLATE; SODIUMDEHYDROACETATE; 2H-Pyran-2,4(3H)-dione,3-acetyl-6-methyl-,ion(1-),sodium;3-(1-hydroxyethylidene)-6-methyl-2h-pyran-2,4(3h)-dione,sodiumsalt[qr]; 4(3h)-dione,3-acetyl-6-methyl-2h-pyran-sodiumsalt; 4(3h)-dione,3-acetyl-6-methyl-2h-pyran-sodiumsalt[qr]; 4-hexenoicacid,2-acetyl-5-hydroxy-3-oxo,delta-lactone,sodiumderiv.
Sodium dehydroacetate is a white crystalline powder that is easily soluble in water. It exhibits weak acidity in water and can release SO2 gas under acidic conditions. Sodium dehydroacetate is a broad-spectrum and highly antibacterial food preservative, with particularly strong inhibitory ability against mold and yeast. At the same dosage, the antibacterial effect is several times or even tens of times higher than the widely used sodium benzoate and potassium sorbate. What is particularly valuable is that it has little inhibitory effect on acid producing bacteria, especially lactic acid bacteria.
| ITEM | PADRÃO |
| Cor | White or near-white |
| Organizational status | Pó |
| Sodium dehydroacetate
(C8H7NaO4, on a dry basis) w/% |
98.0-100.5 |
| Free base test | Passar |
| Moisture w/% | 8.5-10.0 |
| Chloride (Cl) w/% | ≤0.011 |
| Arsenic (As) mg/kg | ≤3 |
| Lead (Pb) mg/kg | ≤2 |
| Identification test | This crystal should be melted at 109°C~111°C |
1.Sodium dehydroacetate is an antibacterial agent with high safety, wide antibacterial range, and strong antibacterial ability. It is less affected by the acidity or alkalinity of food and can maintain high antibacterial efficacy under acidic or slightly alkaline conditions. Its antibacterial ability is superior to sodium benzoate, potassium sorbate, calcium propionate, etc., making it an ideal food preservative.
2. Sodium dehydroacetate can be used for metal surface treatment, degreasing, and rust prevention on metal surfaces,
3. Sodium dehydroacetate can also be used for chemical analysis and the preparation of mordants.
4.Sodium dehydroacetate is also used in the fields of papermaking, leather, coatings, cosmetics, etc
25kg/saco
Calcium(2+)12-hydroxyoctadecanoate CAS 3159-62-4
CAS: 3159-62-4
Purity: 99%min
Molecular Formula: C18H38CaO3
Molecular Weight：342.58
EINECS：2216058
Período de armazenamento：2 ano
Synonyms:calcium(2+)12-hydroxyoctadecanoate; Calcium12-hydroxystearate; Octadecanoicacid,12-hydroxy-,calciumsalt(2:1); 12-hydroxy-octadecanoicacicalciumsalt; Octadecanoicacid,12-hydroxy-,calciumsalt; 12-HYDROXYOCTADECANOICACID,CALCIUMSALT; 12-Hydroxystearicacidcalciumsalt; Bis(12-hydroxyoctadecanoicacid)calciumsalt
Calcium(2+)12-hydroxyoctadecanoate is a chemical substance, also known as calcium hydroxystearate or Calcium dodecyl stearate. Calcium(2+)12-hydroxyoctadecanoate is a white or slightly yellow solid with a wax like appearance. It has good thermal and chemical stability, and is soluble in organic solvents such as alcohols and esters.
| ITEM | PADRÃO |
| Aparência | White to pale yellow crystals or powders |
| Calcium Content% | 5.5-7.0 |
| Loss on Drying% | ≤5.0 |
| Free Acid% | ≤3.0 |
| Heavy Metals% | ≤0.01 |
Calcium(2+)12-hydroxyoctadecanoate is widely used in various chemical and industrial fields.
1.Calcium Content% is 5.5-7.0
2.The heavy metal content is very low, and can be reduced to less than 0.001%
3.The fineness can reach 200 mesh pass through 99%
20kg/saco ou exigência de clientes.
N-Phenyl-1-naphthylamine CAS 90-30-2
CAS: 90-30-2
Pureza: 99%
Molecular Formula: C16H13N
Molecular Weight：219.28
EINECS: 201-983-0
Período de armazenamento: 1 ano
Sinónimos:
N-Phenyl-1-naphthylaMine reagent grade,98%; Akrochem antioxidant PANA;Algerite; alpha-Naphthylphenylamine; alpha-Phenylnaphthylamine; n-phenyl-1-naphthylamin; Phenyl-1-naphthylamine
N-Phenyl-1-naphthylamine CAS 90-30-2, also known as N-Phenylnaphthalen-1-amine, is a commonly used antioxidant in the rubber industry. N-Phenyl-1-naphthylamine is off-white to light brown crystalline powder at room temperature and pressure. N-Phenyl-1-naphthylamine is easily soluble and slightly soluble. N-Phenyl-1-naphthylamine is soluble in ethanol, ether, acetone, chloroform, carbon disulfide and ethyl acetate, slightly soluble in gasoline, but insoluble in water. In addition, N-Phenyl-1-naphthylamine is flammable and toxic. When exposed to sunlight and air, N-Phenyl-1-naphthylamine gradually turns purple.
| Item | Padrão | Resultado |
| Ensaio | 99.0% min-GC | 99.80 |
| Ash | 0.10% max | 0.04 |
| Ponto de fusão | 58℃ min | 58.9-60.4 |
| Heating Loss | 0.10% max | 0.05 |
N-Phenyl-1-naphthylamine is a commonly used aromatic secondary amine antioxidant, widely used in natural rubber, diene synthetic rubber and chloroprene rubber. N-Phenyl-1-naphthylamine not only has good protective effects against heat, oxygen, flexing, weather aging and fatigue, but also can inhibit the effects of harmful metals. N-Phenyl-1-naphthylamine can also be used as a heat stabilizer for polyethylene and is widely used in the plastics industry, mainly in the manufacture of tires, hoses, tapes, rubber rollers, rubber shoes, submarine cable insulation layers, etc. In addition, N-Phenyl-1-naphthylamine can also be used as an additive for high-temperature antioxidants and aviation lubricants.
25kg/saco
3-METHYL-3-BUTEN-1-OL CAS 763-32-6
CAS:763-32-6
Molecular Formula:C5H10O
Peso Molecular:86.13
EINECS:212-110-8
Synonyms:NSC 122673; 3-Methyl-3-buten-1-ol, 97% 500ML; 3-METHYL-3-BUTEN-1-OL FOR SYNTHESIS; 2-Methyl-4-hydroxy-1-butene; 2-Methyl-1-buten-4-ol; 3-Isopentenyl alcohol; 3-methyl-3-buten-1-o; 3-methyl-3-butenol; 3-Methylbut-3-en-1-ol; Isopropenylethyl alcohol; Methallyl carbinol
3-METHYL-3-BUTEN-1-OL, also known as isopentenol, is an organic compound used in the synthesis of chlorpyrifos insecticides and other fine chemicals. It is an important raw material for the production of pharmaceuticals or pesticides. It can be synthesized from isobutene as raw material.
| Item | Especificação |
| Ponto de ebulição | 130-132 °C (lit.) |
| Densidade | 0.853 g/mL a 25 °C (lit.) |
| Ponto de fusão | 36.29°C |
| ponto de inflamação | 97 °F |
| resistividade | n20/D 1.433(lit.) |
| Condições de armazenamento | Keep in dark place,Sealed in dry,2-8°C |
3-METHYL-3-BUTEN-1-OL is used for the synthesis of anti proliferative, anti androgenic, and cytotoxic caffeic acid derivatives.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
3-Cyclohexenecarboxylic acid CAS 4771-80-6
CAS:4771-80-6
Fórmula Molecular:C7H10O2
Molecular Weight:126.15
EINECS:225-314-7
Sinónimos:
3-CYCLOHEXENECARBOXYLIC ACID; 3-CYCLOHEXENE-1-CARBOXYLIC ACID; TIMTEC-BB SBB006583; RARECHEM AL BE 0004; delta(Sup3)-Cyclohexenecarboxylic acid; delta(Sup3)-Cyclohexenylcarboxylic acid; delta3-Cyclohexenecarboxylic acid; delta3-Cyclohexenylcarboxylic acid; Kyselina 1,2,5,6-tetrahydrobenzoova; kyselina1,2,5,6-tetrahydrobenzoova; 1-Cyclohexene-4-carboxylic acid
3-Cyclohexenecarboxylic acid is an alkyl carboxylic acid compound with universal physicochemical properties of alkyl carboxylic acids. The carboxyl unit can undergo a reduction reaction under the action of strong reducing agents
| Item | Especificação |
| Ponto de ebulição | 130-133 °C/4 mmHg (lit.) |
| Densidade | 1.081 g/mL at 25 °C (lit.) |
| Ponto de fusão | 17 °C (lit.) |
| ponto de inflamação | 230 °F |
| resistividade | n20/D 1.48(lit.) |
| Condições de armazenamento | Manter em local escuro |
Important intermediate raw material for 3-cyclohexenecarboxylic acid
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Magnesium thiosulfate hexahydrate CAS 10124-53-5
CAS:10124-53-5
Molecular Formula:H4MgO3S2
Molecular Weight:140.45
EINECS:233-340-5
Synonyms:MAGNESIUM HYPOSULFITE; MAGNESIUM THIOSULFATE; magnosulf; thiosulfuricacid(h2s2o3),magnesiumsalt(1:1); thiosulfuricacid,magnesiumsalt; MAGNESIUM THIOSULPHATE; Magnesium thiosulfate hexahydrate; Einecs 233-340-5; Generation of magnesium sulfate sulfur; Magnesium thiosulfate 6-hydrate
Magnesium thiosulfate hexahydrate is a colorless monoclinic crystal or white crystalline powder. Odorless and salty in taste. Easy to dissolve in water, with a solubility of 231g/100ml water at 100 ℃. Insoluble in alcohol.
| Item | Especificação |
| MW | 140.45 |
| Pureza | 99% |
| EINECS | 233-340-5 |
| SOLÚVEL | insoluble alcohol [MER06] |
Magnesium thiosulfate hexahydrate is used as a dechlorination agent and printing and dyeing assistant for bleached cotton fabrics. It is also used as a detergent, disinfectant, and chemical reagent in medicine
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Manganese nitrate CAS 10377-66-9
CAS:10377-66-9
Molecular Formula:MnN2O6
Molecular Weight:178.95
EINECS:233-828-8
Synonyms:MN(NO3)2; manganese(2+)nitrate; manganese(ii)nitrate,anhydrous; manganese(II)nitrate,NitricAcid,Manganese(2+)Salt; Nitric acid, manganese(2+) salt (2:1); MANGANESE NITRATE; MANGANOUS NITRATE; MANGANESE(II) NITRATE; manganese dinitrate; MANGANESE; ICP STANDARD, MN(NO3)2; Manganous nitrate, solution
Manganese nitrate is a light red or rose colored transparent liquid with a relative density of 1.54 (20 ° C), soluble in water and alcohol, and heated to precipitate manganese dioxide and release nitrogen oxide gas; Manganese nitrate hexahydrate is a light rose colored needle shaped diamond shaped crystal
| Item | Especificação |
| Ponto de ebulição | 100°C |
| Densidade | 1.536 g/mL at 25 °C |
| Proporção | 1.5 |
| Pressão de Vapor | 0Pa em 20℃ |
| Ponto de fusão | 37°C |
Manganese nitrate is used as a raw material for producing manganese dioxide, and can also be used as a metal phosphating agent, ceramic coloring agent, and catalyst. Used as a reagent for trace analysis and determination of silver, Manganese nitrate is also used for separation of rare earth elements and ceramic industry
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:7440-02-0
Molecular Formula:Ni
Molecular Weight:58.69
EINECS:231-111-4
Synonyms:CHLORIDE TITRANT; BETZ 0207; ARGENTI NITRAS; SILVER(I) NITRATE; SILVER NITRATE STANDARD; SILVER NITRATE R1, 42.5 G/L; SILVER NITRATE R1; SILVER NITRATE ON SILICA GEL; SILVER STANDARD; SILVER STANDARD SOLUTION; SILVER NITRATE TITRANT; SILVER, AA STANDARD; NI-5249P
Nickel is a hard, silver white, ductile metal block or gray powder. Nickel powder is flammable and can spontaneously ignite. It may react violently with titanium, ammonium nitrate, potassium perchlorate, and hydrochloric acid. It is incompatible with acids, oxidants, and sulfur. The chemical and physical properties of nickel, especially its magnetism, are similar to those of iron and cobalt.
| Item | Especificação |
| Ponto de ebulição | 2732 °C (lit.) |
| Densidade | 8.9 g/mL at 25 °C (lit.) |
| Ponto de fusão | 1453 °C (lit.) |
| PH | 8.5-12.0 |
| resistividade | 6.97 μΩ-cm, 20°C |
| Condições de armazenamento | sem restrições. |
Nickel is used for various alloys such as New Silver, Chinese Silver, and German Silver; Used for coins, electronic versions, and batteries; Magnet, lightning rod tip, electrical contacts and electrodes, spark plug, mechanical parts; A catalyst used for hydrogenation of oil and other organic substances.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
1-ETHYL-1-METHYLPYRROLIDINIUM BROMIDE CAS 69227-51-6
CAS:12174-11-7
Molecular Formula:2Al.3Mg.6O3Si
Molecular Weight:583.377
EINECS:229-146-5
Sinónimos:
Palygorskite; Permagel; pharmasorb-colloidal; polygorskite; rvm-fg; x250zeogel; Attagpulgite; Palygorskite (Mg(Al0.5-1Fe0-0.5)Si4(OH)O10.4H2O); ATTAPULGITE,ACTIVATEDCOLLOIDAL;COLLODIALACTIVATEDATTAPULGITE,USP; Mallina Attapulgite; FULLERS EARTH; DILUEX; ATTAPULGITE; Tetradecahydrate
1-ETHYL-1-METHYLPYRROLIDIUM BROMIDE is a quaternary ammonium salt. Quaternary ammonium salts, as important chemical raw materials, are widely used in various fields such as chemistry and chemical engineering, and are showing a growing trend. Especially as electrolytes and quaternary ammonium reagents, their dosage and quality requirements are constantly increasing.
| Item | Especificação |
| Ponto de fusão | 106 °C |
| Pureza | 99% |
| Water solubility. | Solúvel em água. |
| MW | 194.11 |
1-ETHYL-1-METHYLPYRROLIDIUM BROMIDE, as an important chemical raw material, is widely used in various fields such as chemistry and chemical engineering, and shows a continuous growth trend. Especially as an electrolyte and quaternization reagent, its dosage and quality requirements are constantly increasing. The production of quaternary ammonium salts is generally obtained through alkylation reactions, or by replacing the anions of existing quaternary ammonium salts.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Sodium 4-amino-1-naphthalenesulfonate CAS 130-13-2
CAS:130-13-2
Molecular Formula:C10H10NNaO3S
Molecular Weight:247.24
EINECS:204-975-5
Synonyms:SODIUM NAPHTHIONATE; SODIUM NAPTHIONATE; SODIUM 1-NAPHTHYLAMINE-4-SULFONATE; SODIUM 4-AMINO-1-NAPHTHALENESULFONATE; PARA-NAPHTHIONIC ACID, NA SALT; NAPHTHYLAMINE-4-SULFONIC ACID SODIUM SALT; NAPHTHIONIC ACID SODIUM SALT; NAPHTHIONIC ACID SODIUM SALT 0.5-WATER; 4-amino-1-naphthalenesulfonicacimonosodiumsalt; sodium1-amino-4-naphthalenesulfonate
Sodium 4-amino-1-naphthalenesulfonate is a white or off white flake crystal. Easy to dissolve in water, soluble in 95% ethanol, insoluble in ether, and slightly soluble in concentrated caustic alkali aqueous solution and ethanol solution.
| Item | Especificação |
| Ponto de fusão | 280 °C (dec.)(lit.) |
| Pureza | 99% |
| Condições de armazenamento | Conservar abaixo de +30°C. |
| PH | 6.8-7.0 (10g/l, H2O, 20°C |
| MW | 247.24 |
Sodium 4-amino-1-naphthalenesulfonate is used for the preparation of acidic, direct dyes, and food grade red pigments, as well as as as an antidote for nitrite and iodine poisoning
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:4773-96-0
Molecular Formula:C19H18O11
Molecular Weight:422.34
EINECS:624-757-7
Synonyms:Chedisaride; ChinoMine; Euxanthogen; Hedysaride; Mannipherin; PO for 250g of Mangiferin froM Mangifera indica bark [4773-96-0].; 1,3,6,7-tetrahydroxyxanthone C2-β-D-glucoside; Mangiferin from Mangifera indica bark; 1,3,6,7-Tetrahydroxyxanthone-C2-b-D-glucoside; XANTHONE-C-GLUCOSIDE
Mangiferin, also known as Guanzhimuning or mangiferin, is a carbon ketone glycoside of tetrahydroxypyridone, belonging to the class of biphenylpyridone flavonoids. It mainly comes from the dried rhizomes of perennial herbaceous plants such as Zhimu in the lily family, leaves, fruits, and bark of plants such as almonds and mangoes, and roots of five layered dragon plants in the winged vine family such as Hainan Five layered Tower
| Item | Especificação |
| Ponto de fusão | 269-270°C |
| Pureza | 98% |
| Condições de armazenamento | 2-8°C |
| os valores de pKa | 6.09±0.20(Predicted) |
| Ponto de ebulição | 842.7±65.0 °C(Predicted) |
Mangiferin, a natural phenolic flavonoid, can be studied as an anti microbial or anti diabetes drug with anti-inflammatory and antioxidant activities. Mangiferin can be used to help identify and characterize type II 5- α – reductase. MGF can be used as a reference substance for the analysis of flavonoids. MGF may act as a promoter of gastrointestinal transport (GIT).
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:12174-11-7
Molecular Formula:2Al.3Mg.6O3Si
Molecular Weight:583.377
EINECS:229-146-5
Synonyms:Palygorskite; Permagel; pharmasorb-colloidal; polygorskite; rvm-fg; x250zeogel; Attagpulgite; Palygorskite (Mg(Al0.5-1Fe0-0.5)Si4(OH)O10.4H2O); ATTAPULGITE,ACTIVATEDCOLLOIDAL;COLLODIALACTIVATEDATTAPULGITE,USP; Mallina Attapulgite; FULLERS EARTH; DILUEX; ATTAPULGITE; Tetradecahydrate
ATTAPULGITE is a layered and chain structured hydrated magnesium rich silicate clay mineral with a monoclinic crystal system. The crystals are rod-shaped and fibrous, with multiple pores inside and grooves on the surface. Both the outer and inner surfaces are well-developed, allowing cations, water molecules, and organic molecules of a certain size to enter.
| Item | Especificação |
| Densidade | 2.2 g/cm3 |
| Pureza | 98% |
| dielectric constant | 1.8（Ambient） |
| MW | 583.377 |
ATTAPULGITE clay ore is mainly composed of palygorskite as the main mineral component. In the chemical industry, it is mainly used as a coagulation inhibitor for urea and granular fertilizers, a processing aid for rubber, a clay thixotropic thickener for polyester resins, a carrier for pesticides, a catalyst for diaminophenylmethane and dichloroethane, a filler for plastics, and a bleaching agent for foaming agents. It is also widely used in industries such as coatings, petroleum, casting, military, building materials, papermaking, pharmaceuticals, printing, and environmental protection.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Dipropylene glycol CAS 25265-71-8
CAS:25265-71-8
Molecular Formula:C6H14O3
Molecular Weight:134.17
EINECS:246-770-3
Synonyms:Dipropylene glycol, 99%, mixture of isomeric propylene glycol ethers; DIPROPYLENE GLYCOL LO+; Dipropylene glycol, Mixture of isoMeric propylene glycol ethers, 99% 1KG; Dipropylene Glycol – Fragrance Grade; Dipropylene Glycol Low Odor; DIPROPYLENE GLYCOL; BIS(HYDROXYPROPYL) ETHER; oxybis-propano; oxybispropanol; oxybis-Propanol
Dipropylene glycol is a odorless, colorless, sweet, water-soluble, and hygroscopic liquid at room temperature. Soluble in water and toluene, miscible in methanol and ether, with a spicy sweet taste and no corrosiveness.
| Item | Especificação |
| Ponto de ebulição | 90-95 °C1 mm Hg |
| Densidade | De 1,023 g/mL a 25 °C (lit.) |
| Pressão de Vapor | <0.01 mm Hg ( 20 °C) |
| Pureza | 99% |
| Condições de armazenamento | Conservar abaixo de +30°C. |
| PH | 6-7 (100g/l, H2O, 20℃) |
Dipropylene glycol is an alcohol organic compound mainly used in high-quality raw material demand fields such as spices, cosmetics, detergents, and food additives; The latter has a relatively low price and is widely used as an industrial solvent with low quality requirements for DPG, as well as a raw material for the production of unsaturated polyester and nitrocellulose varnish.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
trans-Cinnamic acid CAS 140-10-3
CAS:140-10-3
Molecular Formula:C9H8O2
Peso Molecular:148.16
EINECS:205-398-1
Synonyms:(E)-3-Phenylpropenoic acid; CINNAMIC ACID, TRANS-; FEMA 2288; BETA-PHENYLACRYLIC ACID; RARECHEM BK HC T302; 2-PROPENOIC ACID, 3-PHENYL-, (2E)-; AKOS B004228; AKOS 233-01; 3-PHENYL-2-PROPENOIC ACID; 3-PHENYLACRYLIC ACID; 3-STYRYLACRYLIC ACID
Trans cinnamic acid appears as white monoclinic crystals with a slight cinnamon aroma. Cinnamic acid is an important intermediate in fine chemical synthesis, which is insoluble in water, slightly soluble in hot water, and easily soluble in organic solvents such as benzene, acetone, ether, and acetic acid.
| Item | Especificação |
| Ponto de ebulição | 300 °C(lit.) |
| Densidade | 1.248 |
| Pressão de Vapor | 1.3 hPa (128 °C) |
| Pureza | 99% |
| Condições de armazenamento | 2-8°C |
| os valores de pKa | 4.44(at 25℃) |
In the pharmaceutical industry, trans cinnamic acid can be used to synthesize important drugs for the treatment of coronary heart disease, such as lactate and nifedipine, as well as to synthesize chlorpheniramine and cinnamyl piperazine, which are used to manufacture “Xinke An”, local anesthetics, fungicides, hemostatic drugs, etc
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Ethylenebis(nitrilodimethylene)tetraphosphonic acid CAS 1429-50-1
CAS:1429-50-1
Molecular Formula:C6H20N2O12P4
Molecular Weight:436.12
EINECS:215-851-5
Synonyms:EDITEMPA; ETHYLENEDIAMINETETRA(METHYLENEPHOSPHONICACID)SODIUM(EDTMPS); N,N,N’,N’-Ethylenediaminetetrakis(methylenephosphonic Acid) Hydrate; N,N,N’,N’-Tetrakis(phosphonomethyl)ethylenediamineEthylene Diamine Tetra (Methylene Phosphonic Acid) Sodium EDTMP, EDTMPA; ethylene diamine tetra-methylene phosphoric aci
Ethylenebis (nitrodimethylene) tetrahydrophthalic acid is a white crystal. Industrial products are light yellow in color. The product is generally a brownish yellow transparent viscous liquid. The relative density is 1.3-1.4. The decomposition temperature of dry products is 223-228 ℃. Good chemical stability.
| Item | Especificação |
| Ponto de ebulição | 878.7±75.0 °C(Predicted) |
| Densidade | 1.993±0.06 g/cm3(Predicted) |
| Pressão de Vapor | 0Pa em 25℃ |
| Pureza | 99% |
| Condições de armazenamento | Under inert atmosphere |
| os valores de pKa | 0.13±0.10(Predicted) |
Ethylenebis (nitrodimethylene) tetrahydrophthalic acid is used in organic synthesis, pharmaceutical industry, dye intermediates, etc. It is also used as a scale and corrosion inhibitor for steam boilers, a scale inhibitor for circulating cooling water, a stabilizer for peroxides, and a metal ion chelating agent for electroplating industry
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Potassium Amylxanthate CAS 2720-73-2
CAS:2720-73-2
Molecular Formula:C6H13KOS2
Molecular Weight:204.39
EINECS:220-329-5
Synonyms:N-AMYLXANTHIC ACID POTASSIUM SALT; POTASSIUM O-AMYL DITHIOCARBONATE; POTASSIUM AMYLXANTHATE; Potassium n-amulxanthate; aeroxanthate; aeroxanthate350; amylpotassiumxanthate; carbonicacid,dithio-,o-pentylester,potassiumsalt; Carbonodithioicacid,O-pentylester,potassiumsalt; dithiocarbonicacid,o-pentylester,potassiumsalt; dithiocarbonicacido-pentylesterpotassiumsalt
Potassium amylxanthate is an organic sulfur compound with the chemical formula CH3 (CH2) 4OCS2K. It is a light yellow powder with a pungent odor and soluble in water. It is widely used in the flotation process for separating ores in the mining industry.
| Item | Especificação |
| Ponto de ebulição | 497.18℃[at 101 325 Pa] |
| Densidade | 1.24[at 20℃] |
| Pressão de Vapor | 0Pa em 25℃ |
| Pureza | 97.0% |
| Condições de armazenamento | Atmosfera inerte,em Temperatura ambiente |
Potassium Amylsantate is a strong collector mainly used in the flotation of non-ferrous metal minerals that require strong collection power without selectivity. For example, it is a good collector for flotation oxidized sulfide ore or oxidized copper ore and oxidized lead ore (sulfided with sodium sulfide or sodium hydrosulfide). This product can also achieve good separation effects on copper nickel sulfide ores and gold bearing pyrite flotation.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
1-Bromo-3,5-dimethoxybenzene CAS 20469-65-2
CAS:20469-65-2
Molecular Formula:C8H9BrO2
Molecular Weight:217.06
EINECS:695-168-0
Synonyms:1-BROMO-3 5-DIMETHOXYBENZENE 97; 1-Bromo-3,5-dimethox; 1-Bromo-3,5-dimethoxybenzene, 97% solid; 3-Dimethoxybromobenzene; 3，5-Dimethoxybromobenzene; 1-Bromo-3,5-dimethoxybenzene; 1-BroMo-3,5-diMethoxybenzene 97%; 1-Bromo-3,5-dimethoxybezene
1-Bromo-3,5-dimethoxybenzene is an organic intermediate that can be prepared from 3,5-dimethoxyaniline via diazotization reaction. There are literature reports that it can be used to prepare a symmetrical benzimidazole ruthenium complex containing a pyrene group.
| Item | Especificação |
| Ponto de ebulição | 246.0±20.0 °C(Predicted) |
| Densidade | 1.412±0.06 g/cm3(Predicted) |
| Ponto de fusão | 62-66 °C (lit.) |
| Pureza | 98% |
| Condições de armazenamento | Selado em seco,Temperatura de Quarto |
1-Bromo-3,5-dimethoxybenzene can be used to prepare a symmetrical benzimidazole ruthenium complex containing a pyrene group.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Sodium 2-ethylhexanoate CAS 19766-89-3
CAS:19766-89-3
Molecular Formula:C8H17NaO2
Molecular Weight:168.21
EINECS:243-283-8
Synonyms:sodium 2-ethylhexaoate; Sodium 2-ethylhexanoate, min. 97%; 2-Ethylcaproic; Sodium2-ethylhexanoate,min.97%; 2-ETHYLHEXANOICACIDSODIUM; sodium-2-ethylcaproate; SODIUM ISOOCTANOATE; SODIUM 2-ETHYLHEXANOATE; SODIUM 2-ETHYL HEXONATE; Sodium 2-ethylhexano
Sodium 2-ethylhexanoate is a colorless or slightly yellow transparent liquid. Sodium isooctanoate, as one of the important varieties in the isooctanoate series, is mainly used as a salt forming agent in the pharmaceutical industry, for semi synthetic and cephalosporin antibiotics, penicillin salt forming agents, and other drugs.
| Item | Especificação |
| Ponto de ebulição | 157℃[at 101 325 Pa] |
| Densidade | 1.07[at 20℃] |
| Ponto de fusão | >300 °C (lit.) |
| os valores de pKa | 4.82[at 20 ℃] |
| Condições de armazenamento | Atmosfera inerte,em Temperatura ambiente |
Sodium 2-ethylhexanoate is mainly used for the synthesis of isooctanoic acid and its calcium, magnesium salts, etc. It is also used as a salt forming agent in pharmaceuticals, a catalytic drying agent for paints, a stabilizer for polymers, a crosslinking agent, a thickener for oil products, and an energy-saving additive for fuel oils.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Trimethylacetic anhydride CAS 1538-75-6
CAS:1538-75-6
Molecular Formula:C10H18O3
Molecular Weight:186.25
EINECS:216-263-1
Synonyms:BIS(TRIMETHYLACETIC) ANHYDRIDE; 2,2-DIMETHYLPROPIONIC ACID ANHYDRIDE; 2,2-DIMETHYLPROPIONIC ANHYDRIDE; 2,2-Dimethylpropionic anhydride, Pivalic anhydride; Bis(2,2-dimethylpropionic acid)anhydride; Bis(2,2-dimethylpropionic)anhydride; Bis(pivalic acid)anhydride; Bis(pivalic)anhydride; Dipivalic anhydride; Pivalic acid anhydride
Trimethylacetic anhydride belongs to the class of alkyl anhydride compounds, which can be prepared by dehydration reaction of valeric acid. It has extremely high chemical reactivity and is commonly used as an acylation reagent in the field of organic synthesis chemistry. It can be used for esterification reactions of alcohols and phenolic compounds
| Item | Especificação |
| Ponto de ebulição | 193 °C(lit.) |
| Densidade | 0.918 g/mL a 25 °C(lit.) |
| Ponto de inflamação | 135 °F |
| Índice de refração | n20/D 1.409(lit.) |
| Pureza | Atmosfera inerte,em Temperatura ambiente |
Trimethylacetic anhydride is used as an acylation and esterification reagent, which participates in the acylation and esterification reactions with aniline and phenol. Trimethylacetic anhydride is also used in solid-phase oligonucleotide synthesis and kinetic separation of racemic 2-hydroxy – γ – butyrolactone and diphenylacetic acid, for the production of cyano-4, N-tert-butoxycarbonyl piperidine, and in solid-phase oligonucleotide synthesis.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
1,4-Bis(2-hydroxyethoxy)-2-butyne CAS 1606-85-5
CAS:1606-85-5
Fórmula Molecular:C8H14O4
Peso Molecular:174.19
EINECS:216-526-0
Synonyms:1,4-Di(2-hydroxyethoxy)butyne-2; BEO; 3,8-DIOXA-5-DECYNE-1,10-DIOL;
1,4-BIS(2-HYDROXYETHOXY)-2-BUTYNE; 1,4-DI(2-HYDROXYETHOXY)-2-BUTYNE; 2-BUTYNE-1,4-DIOL BIS(2-HYDROXYETHYL) ETHER; 2-BUTYNE-1,4-DIOL-BIS(HYDROXYETHYL ETHER); 2,2′-[2-BUTYNE-1,4-DIYLBIS(OXY)]BISETHANOL; 2,2′-but-2-ynylenedioxydiethanol
1,4-Bis (2-hydroxyethoxy) -2-butyne (BEO) is a condensation product of butynediol and epoxyethane, and is one of the commonly used long-term nickel plating intermediates, which refines the grain size of the coating; Usually used in conjunction with auxiliary brighteners such as saccharin, PME, PPS, PVSS, COSS, PESS, or MOSS.
| Item | Especificação |
| Ponto de ebulição | 225.17°C (rough estimate) |
| Densidade | 1.144 g/mL at 25 °C(lit.) |
| Ponto de inflamação | >230 °F |
| os valores de pKa | 13.95±0.10(Previsto) |
| Pureza | 99% |
1,4-Bis (2-hydroxyethoxy) -2-butyne long-lasting brightener, weak leveling agent, used as an electroplating brightener, is one of the commonly used long-lasting nickel plating intermediates, which refines the grain size of the coating
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:110-44-1
Molecular Formula:C6H8O2
Molecular Weight:112.13
EINECS:203-768-7
Synonyms:1,3-Pentadiene-1-carboxylic acid; 2,4-HEXANEDIENOIC ACID; 2,4-HEXADIENOIC ACID; ACIDUM SORBICUM; (2-Butenylidene)acetic acid; Acetic acid, (2-butenylidene)-; Acetic acid, crotylidene-; aceticacid,(2-butenylidene); aceticacid,crotylidene; acidesorbique; alpha-trans-gamma-trans-Sorbic acid; alpha-trans-gamma-trans-sorbicacid
Sorbic acid is a white crystalline powder that is insoluble in water but easily soluble in ethanol and other organic solvents. Sorbic acid and potassium sorbate are food preservatives with extensive antibacterial and anti mold properties.
| Item | Especificação |
| Ponto de ebulição | 228°C |
| Densidade | 1.2 g/cm3 at 20 °C |
| Ponto de fusão | 132-135 °C (lit.) |
| os valores de pKa | 4.76(at 25℃) |
| Pureza | 99% |
| PH | 3.3 (1.6g/l, H2O, 20°C) |
Sorbic acid is a new type of food preservative that can effectively inhibit the growth of bacteria, mold, and yeast, without causing adverse effects on food. It can participate in human metabolism and can also be used in industries such as medicine, light industry, cosmetics, etc. As an unsaturated acid, it can also be used in industries such as resin, fragrance, and rubber.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:51-17-2
Molecular Formula:C7H6N2
Molecular Weight:118.14
EINECS:200-081-4
Synonyms:TIMTEC-BB SBB004294; N,N’-O-PHENYLENEFORMAMIDINE; 1,3-BENZODIAZOLE; 1H-BENZIMIDAZOLE; 1H-BENZO[D]IMIDAZOLE; AKOS BBS-00004349; BENZIMIDAZOLE; 1,3-Diazaindene; BENZIMIDAZOLE extrapure; 1H-Benzoimidazole; Azindol; N,N’-Methylenyl-o-phenylenediamine; BENZIMIDAZOLE FOR SYNTHESIS 100 G; BENZIMIDAZOLE FOR SYNTHESIS 500 G
Benzimidazole is a sheet-like crystal, with a temperature of 170 ℃, soluble in water and ethanol. Benzimidazole can be used as an intermediate imidazole for the preparation of fungicides such as Imidacloprid and Imidaclopramide.
| Item | Especificação |
| Ponto de ebulição | 360 °C |
| Densidade | 1.1151 (rough estimate) |
| Ponto de fusão | 169-171 °C (lit.) |
| ponto de inflamação | 360°C |
| resistividade | 1.5500 (estimativa) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
Benzimidazole has a wide range of applications in the fields of pesticides, pharmaceuticals, and materials. Moreover, its unique imidazole structure plays an important role in various drug research, especially in the development of PARP inhibitors. Used for synthesizing drugs such as vitamin B12 and preparing polymer compounds
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
3,3′,5,5′-Tetramethylbenzidine dihydrochloride CAS 64285-73-0
CAS:64285-73-0
Molecular Formula:C16H21ClN2
Molecular Weight:276.81
EINECS:264-769-6
Synonyms:3,3”,5,5”-TETRAMETHYLBENZIDINE DIHYDROCHLORIDE, HIGH PURE; GRADE 99+%; 3,3”5,5-TETRAMETHYLBENZIDINE DRHYDROXHLORIDE; 4-(4-Amino-3,5-dimethylphenyl)-2,6-dimethylaniline dihydrochloride; Tmb(3,35,5TetramethylBenzidine)Dihydrochloride; 3,3′,5,5′-Tetramethylbenzidine·2hydrochloride; [4-(4-amino-3,5-dimethyl-phenyl)-2,6-dimethyl-phenyl]amine dihydrochloride; 4-(4-azanyl-3,5-dimethyl-phenyl)-2,6-dimethyl-aniline dihydrochloride
3,3 ‘, 5,5’ – Tetramethylbenzidine dihydrochloride is a novel and safe chromogenic reagent used for peroxidase detection and colorimetric analysis
| Item | Especificação |
| Ponto de fusão | ≥300 °C |
| Pureza | 99% |
| ponto de inflamação | 54 °C |
| MW | 276.81 |
| Condições de armazenamento | 2-8°C |
3,3 ‘, 5,5’ – Tetramethylbenzidine dihydrochloride is used in clinical laboratory testing, forensic examination, criminal investigation, environmental monitoring and other fields. It can easily and quickly complete metal ion detection, partial enzyme detection, and can also be used in signal sensing system research.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
2,2,3,4,4,4-Hexafluorobutyl acrylate CAS 54052-90-3
CAS:54052-90-3
Molecular Formula:C7H6F6O2
Molecular Weight:236.11
EINECS:NA
Synonyms:2-Propenoic acid 2,2,3,4,4,4-hexafluorobutyl ester; hexafluorobutyl acrylate;2,2,3,4,4,4-HEXAFLUOROBUTYL ACRYLATE; ACRYLIC ACID 2,2,3,4,4,4-HEXAFLUORO-BUTYL ESTER; 2,2,3,4,4,4-Hexafluorobutyl acrylate 95%; 2,2,3,4,4,4-Hexafluorobutylacrylate95%; 1H,1H,3H-Perfluorobutyl acrylate 95%; 2,2,3,4,4,4-Hexafluorobutyl prop-2-enoate; 2,2,3,4,4,4-Hexaflurorobutyl Acrylate
2,2,3,4,4,4-Hexafluorobutyl acrylate is a transparent and colorless liquid that can be used for the preparation of high-end fluorinated polymers.
| Item | Especificação |
| Ponto de ebulição | 40-43 °C/8 mmHg (lit.) |
| Densidade | 1.389 g/mL at 25 °C (lit.) |
| ponto de inflamação | 140 °F |
| resistividade | n20/D 1.352(lit.) |
| Condições de armazenamento | 2-8°C |
2,2,3,4,4,4-Hexafluorobutyl acrylate can be used for the preparation of high-end fluorinated polymers. Can be used for the preparation of new building exterior wall coatings with high weather resistance, anti fouling, and self-cleaning functions. Hexafluorobutyl acrylate is also used in the preparation of leveling agents, defoamers, surfactants, etc. It can also be used as a raw material for optical resins, fabrics, leather processing, glass, paper, and wood product protection.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Sodium dimethyl 5-sulphonatoisophthalate CAS 3965-55-7
CAS:3965-55-7
Molecular Formula:C10H11NaO7S
Molecular Weight:298.24
EINECS:223-578-8
Synonyms:3,5-bis(methoxycarbonyl)-benzenesulfonicacisodiumsalt;3,5-bis-(methoxykarbonyl)benzensulfonansodny; 3,5-bis-methylkarboxy-benzensulfonansodny; Dimethyl-5-SodiumSulfoisophthalate; Isophthalicacid,5-sulfo-,1,3-dimethylester,sodiumsalt; DIMETHYL SODIUM 5-SULFOISOPHTHALATE; DIMETHYL 5-SULFOISOPHTHALATE; DIMETHYL 5-SULFOISOPHTHALATE, SODIUM SALT; 5-SODIUM SULFODIMETHYL ISOPHTHALATE
Sodium dimethyl 5-sulphonasophthalate is a white to almost white powder that is soluble in water. It can also be used as an intermediate in organic synthesis, polymer synthesis, and fine chemicals.
| Item | Especificação |
| Ponto de fusão | >300 °C(lit.) |
| Densidade | 1.705[at 20℃] |
| MW | 298.24 |
| pureza | 98% |
| Condições de armazenamento | Atmosfera inerte,em Temperatura ambiente |
Sodium dimethyl 5-sulphonatophthalate is mainly used in the synthesis of polyester and can also be used as an intermediate in organic synthesis, polymer synthesis, and fine chemical engineering.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:3118-97-6
Molecular Formula:C18H16N2O
Molecular Weight:276.33
EINECS:221-490-4
Synonyms:Cerotinscharlach G; cerotinscharlachg; colorindexno:12140; Ext D and C Red No. 14; Ext. D and C Red No. 14; Ext. D and C. red. no. 14; extd&credno14; extdandcred.no.14; extdandcredno14; Extract D And C Red No. 14; extractdandcredno.14; Fast Oil Orange II
SUDAN II is a brownish red crystal that is soluble in organic solvents such as methanol, ethanol, DMSO, and is derived from synthetic dyes.
| Item | Especificação |
| Ponto de ebulição | 419.24°C (rough estimate) |
| Densidade | 1.1318 (rough estimate) |
| MW | 276.33 |
| os valores de pKa | 13.52±0.50(Predicted) |
| Condições de armazenamento | Under inert atmosphere |
SUDAN II biological staining agent, such as fat staining of central nervous system tissue. Sudan Red II can be used as a fungicide and dye.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
2-Amino-1,5-naphthalenedisulfonic acid CAS 117-62-4
CAS:117-62-4
Fórmula Molecular:C10H9NO6S2
Peso Molecular:303.31
EINECS:204-201-6
Synonyms:SULFO TOBIAS ACID; SULPHOTOBIAS ACID; 2-amino-1,5-naphthalenedisulfonic; Sulfonic Tobias Acid; 2-NAPHTHYLAMINE-1 5-DISULFONIC ACID SODI; 2-NAPHTHYLAMINE-1,5-DISULFONIC ACID, F. PROT. SEQ. ANALYSIS; 1,5-Naphthalenedisulfonic acid, 2-amino-2-amino-5-naphthalenedisulfonicacid; 5-sulfo-tobiasaci; kyselina2-naftylamin-1,5-disulfonova
2-Amino-1,5-naphthalenedionic acid is an important intermediate product in the production of dyes, especially reactive dyes. The method involves sulfonating 2-naphthylamine-1-sulfonic acid (Tobias acid) in oleum (SO3 content 15-30% by weight) at room temperature.
| Item | Especificação |
| Ponto de ebulição | 205.8°C (rough estimate) |
| Densidade | 1.6329 (estimativa) |
| MW | 303.31 |
| os valores de pKa | -0.51±0.40(Predicted) |
| Condições de armazenamento | 2-8°C |
2-Amino-1,5-naphthalenedionic acid is an important intermediate product used as a dye intermediate, especially in the production of reactive dyes.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:10596-23-3
Molecular Formula:CH4Cl2O6P2
Molecular Weight:244.89
EINECS:234-212-1
Synonyms:(Dichloromethylene)bis(phosphonic acid); ARC-69931; Dichloromethylenebis(phosphonic acid); Dichloromethylenebisphosphonic acid; Aids071014; Aids-071014; Methanedichlorodiphosphonate; (Dichloromethylene); diphosphonic acid; Clodronate Acid
CLODRONIC ACID is an organic compound suitable for bone metastases, multiple myeloma, Paget’s disease, and osteoporosis caused by various reasons; Treating hypercalcemia caused by malignant tumors; Treat osteoporosis.
| Item | Especificação |
| Ponto de ebulição | 474.7±55.0 °C(Predicted) |
| Densidade | 2.306±0.06 g/cm3(Predicted) |
| MW | 244.89 |
| os valores de pKa | 0.75±0.10(Predicted) |
| Condições de armazenamento | sob gás inerte (nitrogênio ou Argônio) a uma temperatura de 2-8°C |
CLODRONIC ACID is an organic compound suitable for bone metastases, multiple myeloma, Paget’s disease, and osteoporosis caused by various reasons; Treating hypercalcemia caused by malignant tumors; Treat osteoporosis.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Gambogenic acid CAS 173932-75-7
CAS:173932-75-7
Molecular Formula:C38H46O8
Molecular Weight:630.78
EINECS:NA
Synonyms:Gambogenic acid,Histone Methyltransferase,inhibit,Inhibitor; (Z)-4-((1R,3aS,5S,12aS)-9-((E)-3,7-Dimethylocta-2,6-dien-1-yl)-8,10-dihydroxy-2,2-dimethyl-11-(3-methylbut-2-en-1-yl)-4,7-dioxo-1,2,5,7-tetrahydro-1,5-methanofuro[2,3-d]xanthen-3a(4H)-yl)-2-methylbut-2-enoic acid
Gambogenic acid is a brownish red crystalline powder that is soluble in organic solvents such as methanol, ethanol, DMSO, and is derived from Tenghuang.
| Item | Especificação |
| Ponto de ebulição | 818.6±65.0 °C(Predicted) |
| Densidade | 1.27±0.1 g/cm3(Predicted) |
| MW | 630.78 |
| os valores de pKa | 4.58±0.36(Predicted) |
| Condições de armazenamento | 4°C, protegido da luz |
Gambogenic acid has anti-tumor and anticancer effects.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Diethyl cyanomethylphosphonate CAS 2537-48-6
CAS:2537-48-6
Molecular Formula:C6H12NO3P
Molecular Weight:177.14
EINECS:219-806-0
Synonyms:Diethyl (cyanomethyl)phosphonate 98%; LABOTEST-BB LT00233137; DEPAN; CYANOMETHANEPHOSPHONIC ACID DIETHYL ESTER; CYANOMETHYLPHOSPHONIC ACID DIETHYL ESTER; DIETHYL CYANOMETHYLPHOSPHONATE; (DIETHYLPHOSPHONO)ACETONITRILE; 2-chloro-3-(3-methoxypropylamino)naphthalene-1,4-dione; Diethyl cyanomethylp; (Diethylphosphono)acetonitrile, Cyanomethylphosphonic acid diethyl ester
Diethyl cyanomethylphosphonate is a colorless and transparent liquid with a density of 1.095, a boiling point of 101-102 ℃, and a refractive index of 1.4312-1.4332. It is used for the preparation of 2-aminoquinoline.
| Item | Especificação |
| Ponto de ebulição | 101-102 °C0.4 mm Hg(lit.) |
| Densidade | 1.095 g/mL at 25 °C(lit.) |
| ponto de inflamação | >230 °F |
| resistividade | n20/D 1.434(lit.) |
| Condições de armazenamento | Atmosfera inerte,2-8°C |
Diethyl cyanomethylphosphonate is a colorless and transparent liquid with a density of 1.095, a boiling point of 101-102 ℃, and a refractive index of 1.4312-1.4332. It is used for the preparation of 2-aminoquinoline.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Halobetasol propionate CAS 66852-54-8
CAS:66852-54-8
Molecular Formula:C25H31ClF2O5
Molecular Weight:484.96
EINECS:686-247-0
Synonyms:ulobetasol propionate; HALOBETASOL PROPIONATE; BMY-30056; CGP-14458; Uiobetasol Propionate; Ultravate; Ulobetasol (Halobetasol)Propionate; 6 alpha-fluoroclobetasol 17-propionate; Halobatasol Proionate; Halobetasol Propionate (200 mg); Miracorten
Halobetasol propionate crystals with a melting point of 220-221 ℃. Lobetasol propionate is a 6 α – fluorosteroid compound. These drugs have an exclusive 6-fluoro substituent in the alpha – (flat) configuration.
| Item | Especificação |
| Ponto de ebulição | 570.7±50.0 °C(Predicted) |
| os valores de pKa | 12.55±0.70(Predicted |
| Ponto de fusão | 213-215°C |
| MW | 484.96 |
| Condições de armazenamento | Geladeira |
Halobetasol Propionate is a local corticosteroid. Used to alleviate skin inflammation and itching symptoms that are sensitive to corticosteroids. Lobetasol propionate is a local therapeutic drug used for the treatment of plaque psoriasis in adult patients.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:17316-67-5
Molecular Formula:C7H18NO2P
Molecular Weight:179.2
EINECS:241-341-7
Synonyms:Butafo; [1-(butylamino)-1-methylethyl](hydroxy)oxophosphonium; Butafosfan USP/EP/BP; Butaflon; Butafosulfate; N-Dimethyladenine; Cloth he p; 2-Methyl-70-nitrobenzyl&chloride; P-[1-(Butylamino)-1-methylethyl]phosphinic acid; 2-(butylamino)propan-2-yl]phosphinic acid; utafosfan; Butaphosphate
Butafosfan is a white crystalline powder, which is an important veterinary drug raw material and an effective organic phosphorus supplement. It can promote liver function, help the muscle movement system recover from fatigue, reduce stress reactions, stimulate appetite, and promote non-specific immune function
| Item | Especificação |
| Ponto de ebulição | 273.4±42.0 °C(Predicted) |
| os valores de pKa | 2.99±0.10(Predicted) |
| Ponto de fusão | 219 °C |
| MW | 179.2 |
| Condições de armazenamento | Under inert atmosphere |
Butafosfan is an active ingredient in animal medicine raw materials and effective organic phosphorus supplements; Promote liver function; Help the muscle coordination system recover from fatigue; Reduce stress response; Stimulate appetite; Promote non-specific immune function; Simple physical stimulation mode, with no residue or side effects in the body.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Copper oxychloride CAS 1332-65-6
CAS:1332-65-6
Molecular Formula:ClCuO
Molecular Weight:115
EINECS:215-572-9
Synonyms:COPPER OXYCHLORIDE, 1GM, NEAT; Copper oxychloride; Dicopper chloride trihydroxide; CEKUCOBRE; CUPROKYLT; CUPRIC ; OXYCHLORIDE; CUPOX; CUPRAVIT; COPRANTOL; COPTOX; COPPER (II) OXYCHLORIDE; COBOX; FUNGURAM
Copper oxychloride light green crystal, crystalline powder, insoluble in water; Dissolved in acid solution is a metal copper salt. Copper chloride solution reacts with ammonia and hydrochloric acid to form basic copper chloride through neutralization crystallization reaction.
| Item | Especificação |
| Pressão de Vapor | 4.6Pa at 20℃ |
| Densidade | 3.76-3.78 g/cm3 |
| Solubilidade | Insolúvel em água |
| Pureza | 99% |
Copper oxychloride has a wide range of applications in industrial production, including pesticide intermediates, pharmaceutical intermediates, wood preservatives, feed additives, etc.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
PENTAERYTHRITYL TETRABROMIDE CAS 3229-00-3
CAS:3229-00-3
Molecular Formula:C5H8Br4
Molecular Weight:387.73
EINECS:221-764-3
Synonyms:PENTAERYTHRITYL TETRABROMIDE; TETRAHYDROXYMETHYLMETHANE TETRABROMIDE; TETRAKIS(BROMOMETHYL)METHANE; TETRAKIS(HYDROXYMETHYL)METHANEETRABROMIDE; TETRAMETHYLOLMETHANE TETRABROMIDE; 1,3-DIBROMO-2,2-DI(BROMOMETHYL)PROPANE; 1,3-DIBROMO-2,2-BIS(BROMOMETHYL)PROPANE
PENTAERYTHRITYL TETRABROMIDE, also known as pentatetrabromide. Tetrabromoneopentane is an important intermediate for the synthesis of water-based adhesives, crosslinking agents, other dendritic compounds (or oligomers), and surfactants
| Item | Especificação |
| Ponto de ebulição | 305-306 °C(lit.) |
| Densidade | 2.596 g/mL at 25 °C(lit.) |
| Ponto de fusão | 158-160 °C(lit.) |
| resistividade | 1.6208 (estimate) |
| Condições de armazenamento | Selado em seco,Temperatura de Quarto |
PENTAERYTHRITYL TETRABROMIDE is an alkane organic compound that can be used as an intermediate in organic synthesis.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Fructooligosaccharides CAS 308066-66-2
CAS:308066-66-2
Fórmula Molecular:ND
Peso Molecular:0
EINECS:204-465-2
Synonyms:FRUCTOOLIGOSACCHARIDE, 80%-90%; FructooIigsacccharids; FOS; FRUCTOOLIGOSACCHARIDES; Oligolevulose; Beneo p 95; Fortifeed; Fos-p power 300; Nutraflora; Fructooligosaccharides, 90 Percent, Powder; Anti-FOS, N-Terminal antibody produced in rabbit; Proto-oncogene protein c-fos
Fructooligosaccharides, also known as oligosaccharides, are an essential component of human diet. Their molecular structure is GF Fn (n=1-9). It has significant effects on improving intestinal function, preventing constipation and diarrhea, reducing blood lipids, and enhancing human immunity.
| Item | Especificação |
| EINECS | 204-465-2 |
| MW | 0 |
| Pureza | 99% |
| Condições de armazenamento | 2-8°C |
Fructolithigosacharides sweeteners are used in various foods such as dairy products, probiotic beverages, solid drinks, candies, cookies, bread, jelly, and cold drinks. Oligofructose has the ability to regulate gut microbiota, proliferate bifidobacteria, promote calcium absorption, regulate blood lipids, immune regulation, and resist dental caries.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Magnesium sulfate heptahydrate CAS 10034-99-8
CAS:10034-99-8
Molecular Formula:Mg.O4S.7H2O
Molecular Weight:246.47
EINECS:600-073-4
Synonyms:EPSOM SALTS, HEPTAHYDRATE; EPSOM SALT; BITTER SALT; BITTER SALTS; MAGNESIUM SULPHATE 7H2O; MAGNESIUM SULPHATE 7-HYDRATE; MAGNESIUM SULPHATE HEPTAHYDRATE; MAGNESIUM SULFATE, 7-HYDRATE; MAGNESIUM SULFATE HEPTAHYDRATE; MAGNESII SULFAS
Magnesium sulfate heptahydrate, also known as sulfur bitterness, bitter salt, laxative salt, or laxative salt, is a white or colorless needle shaped or oblique columnar crystal structure that is odorless, cool, and slightly bitter. It is easily weathered into powder in air (dry) and gradually loses its crystalline water when heated to become anhydrous magnesium sulfate
| Item | Especificação |
| λmax | λ: 260 nm Amax: 0.010 |
| Densidade | 2.66 |
| Ponto de fusão | 1124°C |
| Pressão de Vapor | <0.1 mm Hg ( 20 °C) |
| PH | 5.0-8.0 (25℃, 50mg/mL in H2O) |
| Condições de armazenamento | Guarde-o em +5°C a +30°C. |
Magnesium sulfate heptahydrate is a multifunctional compound widely used in multiple industries. In the textile industry, it is used for printing and dyeing thin cotton and silk fabrics, as well as serving as a weighting agent for cotton and silk, and as a filler for kapok products. In addition, it also plays an important role in the manufacturing process of porcelain, pigments, and fire-resistant materials.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:693-54-9
Fórmula Molecular:C10H20O
Peso Molecular:156.27
EINECS:211-752-6
Synonyms:2-Decanon; Decan-2-one; n-C8H17COCH3; Octyl methyl ketone; octylmethylketone; DECANONE; METHYL OCTYL KETONE; METHYL N-OCTYL KETONE; 2-decanone+A8; 2-DECANONE 98+%; 2-DECANONE, STANDARD FOR GC
The ketone carbonyl group in the 2-decanone structure can undergo condensation reaction with ethylene glycol substances under the action of a condensing agent to obtain corresponding ketone derivatives. This compound can also undergo a reduction reaction under the action of sodium borohydride to obtain corresponding alkyl alcohol derivatives.
| Item | Especificação |
| Ponto de ebulição | 211 °C (lit.) |
| Densidade | 0.825 g/mL at 25 °C (lit.) |
| Ponto de fusão | 3.5 °C (lit.) |
| Pressão de Vapor | >1 (vs ar) |
| Ponto de inflamação | 160 °F |
| Condições de armazenamento | Conservar abaixo de +30°C. |
2-Decanone has moderate volatility, which is crucial for its production in the fragrance and cosmetics industries. Due to the presence of a methyl ketone unit in the 2-decanone structure, it can undergo the classical iodoform reaction in the presence of halogens and strong bases.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
2-Hydroxy-5-octanoylbenzoic acid CAS 78418-01-6
CAS:78418-01-6
Fórmula Molecular:C15H20O4
Peso Molecular:264.32
EINECS:417-790-1
Synonyms:CAPRYLOYL SALICYLIC ACID; 2-Hydroxy-5-(1-oxooctyl)benzoic acid; 5-Octanoylsalicylic acid; Caprylyl salicylic acid; Water-soluble octanoyl salicylic acid; Benzoic acid, 2-hydroxy-5-(1-oxooctyl)-; 2-Hydroxy-5-n-octanoylbenzoic Acid; 5-n-Octanoylsalicylic Acid; 5- octyl salicylic acid; Octyl salicylic acid; 2-hydroxy-5-octanoylbenzoic acid
2-Hydroxy-5-octanoylbenzoic acid is commonly referred to as β – LHA (β – lipohydroxy acid, long-chain fatty alkyl – β – hydroxycarboxylic acid) Active compounds used in cosmetics.
| Item | Especificação |
| Ponto de ebulição | 454.8±35.0 °C(Predicted) |
| Densidade | 1.144 |
| Ponto de fusão | 115 °C |
| Pressão de Vapor | 97.3Pa at 21℃ |
| os valores de pKa | 2.68±0.10(Predicted) |
| Condições de armazenamento | Selado em seco,Temperatura de Quarto |
2-Hydroxy-5-octanoylbenzoic acid not only maintains the effectiveness of salicylic acid in removing aged keratin, but also enhances its affinity with skin cells, making it easier to penetrate into the stratum corneum. It can be used as an external ingredient in cosmetics to delay aging and treat blackheads and acne.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:104227-87-4
Molecular Formula:C14H19N5O4
Molecular Weight:321.33
EINECS:630-411-6
Synonyms:2-[2-(2-amino-9H-purin-9-yl)ethyl]-1,3-propanediol 1,3-diacetate; [2-(acetoxymethyl)-4-(2-aminopurin-9-yl)butyl] acetate; Famciclovir>; Famciclovir Famciclovir; Famciclovir HCL; 1,3-Propanediol, 2-[2-(2-amino-9H-purin-9-yl)ethyl]-, 1,3-diacetate; Famciclovir USP/EP/BP; Famciclovir(BRL 42810); Famciclovir D6
Famciclovir white crystal is the first oral medication approved in the United States for the treatment of facial and genital herpes, and the only medication used to alleviate postherpetic neuralgia
| Item | Especificação |
| Ponto de ebulição | 550.2±60.0 °C(Predicted) |
| Densidade | 1.40±0,1 g/cm3(Previsto) |
| Ponto de fusão | 102-104°C |
| λmax | 310nm(EtOH)(lit.) |
| os valores de pKa | 4.00±0.10(Predicted) |
| Condições de armazenamento | 2-8°C |
Famciclovir is used for herpesvirus infectious diseases, such as varicella, herpes zoster, genital herpes, and herpes simplex, and is particularly practical for viral infections where acyclovir is not ideal for treatment.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:443-48-1
Molecular Formula:C6H9N3O3
Molecular Weight:171.15
EINECS:207-136-1
Synonyms:TIMTEC-BB SBB001486; 1-(2-Hydroxy-1-ethyl)-2-methyl-5-nitroimidazole; 1-(2-hydroxyethyl)-2-methyl-5-nitroimidazole; 1-(beta-Hydroxyethyl)-2-methyl-5-nitroimidazole; 1-(beta-Oxyethyl)-2-methyl-5-nitroimidazole; 1H-Imidazole-1-ethanol, 2-methyl-5-nitro-; 1H-Imidazole-1-ethanol,2-methyl-5-nitro-; 1-Hydroxyethyl-2-methyl-5-nitroimidazole; 2-(2-Methyl-5-nitro-1H-imidazol-1-yl)ethanol; 2-Methyl-1-(2-hydroxyethyl)-5-nitroimidazole
Metronidazole is a white or slightly yellow crystalline or crystalline powder; There is a slight odor, with a bitter and slightly salty taste. Slightly soluble in ethanol, slightly soluble in water or chloroform, and extremely slightly soluble in ether. Metronidazole is a nitrogen-containing heterocyclic compound with alkalinity and low water solubility. According to the prodrug principle, metronidazole is made into potassium phosphate ester, which increases its water solubility and can be used as an injection solution.
| Item | Especificação |
| Ponto de ebulição | 301.12°C (rough estimate) |
| Densidade | 1.3994 (rough estimate) |
| Ponto de fusão | 159-161 °C (lit.) |
| os valores de pKa | pKa 2.62(H2O,t =25±0.2, |
| Condições de armazenamento | 2-8°C |
Metronidazole has a strong antibacterial effect on most anaerobic bacteria and is used to treat amoebiasis, trichomoniasis, and anaerobic bacterial infections. It is also used to treat vaginal trichomoniasis and has been used for intestinal and extraintestinal amoebiasis since 1970. Its efficacy is high, toxicity is low, and it is widely used. Has mutagenic and teratogenic effects on animal experiments.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
6-Cyano-2-naphthol CAS 52927-22-7
CAS:52927-22-7
Molecular Formula:C11H7NO
Molecular Weight:169.18
EINECS:628-663-7
Synonyms:6-CYANO-2-NAPHTHOL; 6-HYDROXY-NAPHTHALENE-2-CARBONITRILE;6-HYDROXY-2-NAPHTHALENECARBONITRILE; 6-HYDROXY-2-NAPHTHONITRILE; 6-CYANO-2-NAPHTHOL 99%; 6-CYANO-2-NAPHTHALENOL; CYANO(6-)-2-NAPTHOL; 6-Cyano-2-naphthol (Nafamostat mesylate); 6-Cyano-2-naphthol ,99%; 2-Cyano-6-hydroxynaphthalene; 2-Hydroxy-6-naphthonitrile
6-Cyano-2-naphthol is an organic intermediate that can be obtained by reacting 6-hydroxy-2-naphthaldehyde with hydroxylamine hydrochloride or by reacting 6-bromo-2-naphthol with copper cyanide. DMSO (slightly soluble), ethanol, ethyl acetate (slightly soluble), methanol (slightly soluble)
| Item | Especificação |
| Ponto de ebulição | 383.1±15.0 °C(Predicted) |
| Densidade | 1.28±0.1 g/cm3(Predicted) |
| Ponto de fusão | 165.5-170.5 °C (lit.) |
| os valores de pKa | 8.57±0.40(Predicted) |
| Condições de armazenamento | Selado em seco,Temperatura de Quarto |
6-Cyano-2-naphthol can be used as an organic synthesis intermediate and pharmaceutical intermediate, mainly in laboratory research and development processes and chemical production processes.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Sodium Myreth Sulfate CAS 25446-80-4
| A aparência(25℃) | White or light yellow gelatinous paste or White crystalline powder |
| Odor | Slight characteristic odor |
| Active ingredient content (%) | 68-72 |
| Unsulfated (%) | ≤3.5 |
| Sodium sulfate (%) | ≤1.5 |
| PH value(25℃,1%) | 6.5-11 |
Surfactant: Sodium Myreth Sulfate can be used as an ingredient in daily cleaning products such as detergents and dishwashers, providing functions such as stain removal, emulsification, and dispersion.
Sodium Myreth Sulfate can be used in the production of daily cleaning products, serving functions such as decontamination, emulsification, and dispersion. It is a low-cost surfactant ingredient.
170kg/drum
CAS:192725-17-0
Molecular Formula:C37H48N4O5
Molecular Weight:628.81
EINECS:200-001-8
Synonyms:Lopinavir for system suitability; Lopinavir for peak identification; Lopinavir, 99%, HIV protease inhibitor; (S)-N-((2R,4S,5S)-5-(2-(2,6-Dimethylphenoxy)acetamido)-4-hydroxy-1,6-diphenyl-hexn-2-yl)-3-met; ABT-378 whatsapp; Lopinavir CRS; Lopinavir for system suitability CRS; Lopinavir for peak identification CRS
Lopinavir, an important antiviral drug, is an antiviral drug, which belongs to human immunodeficiency virus (HIV) protease inhibitor and is widely used in the treatment of AIDS.
| Item | Especificação |
| Ponto de ebulição | 924.1±65.0 °C(Predicted) |
| Densidade | 1.163±0.06 g/cm3(Predicted) |
| Ponto de fusão | 255.2-260.6 °F (124—127°C) |
| os valores de pKa | 13.89±0.46(Predicted) |
| Condições de armazenamento | 2-8°C |
Lopinavir is a protease inhibitor of AIDS virus and an antiretroviral drug. Used for the treatment of HIV-1 infection in adult and pediatric patients over 6 months old.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:82186-77-4
Molecular Formula:C30H32Cl3NO
Molecular Weight:528.94
EINECS:617-303-4
Synonyms:CPG-56695; Benwuchun; Benflumentol; benflumetol; Lumefantrine; BENFLUMETOL (OR LUMEFANTRINE); LuMefentrine; LuMenfantrine; LuMenfantrine-d9; BENFLUMETOLUM; Lumefantrine, 98%, Inhibits hemozoin formation. Antimalarial.; Lumefantrine [Benflumetol]
Lumefantrine is a yellow crystalline powder with a bitter almond odor and no taste. Easily soluble in chloroform, slightly soluble in acetone, almost insoluble in ethanol, with a melting point of 125-131 ℃.
| Item | Especificação |
| Ponto de ebulição | 642.5±55.0 °C(Predicted) |
| Densidade | 1.252 |
| Ponto de fusão | 129-131°C |
| os valores de pKa | 13.44±0.20(Predicted) |
| Condições de armazenamento | De 15 a 25°C |
Lumefantrine is currently a widely used anti malaria drug in clinical practice in China, and is also the main ingredient of Novartis’ well-known anti malaria drug compound artemether. It can kill the red phase asexual body of malaria parasites with high insecticidal rate,
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAROB GALACTOMANNAN CAS 11078-30-1
CAS:11078-30-1
Fórmula Molecular:ND
Peso Molecular:0
EINECS:234-299-6
Synonyms:CAROB GALACTOMANNAN; D-GALACTO-D-MANNAN; GALACTOMANNANE CARUBIN TYPE; GALACTOMANNANE GUARIN TYPE; galactomannan; D-Galacto-D-mannan Ceratonia siliqua; D-galacto-D-mannan from ceratonia siliqua; D-GALACTO-D-MANNAN FROM CERATONIA SILIQUA 90+%; D-Galacto-D-Mannane, average M.W. 20,000
CAROB GALACTOMANNAN is a nearly white powder, odorless and tasteless. Easy to dissolve in cold water, the aqueous solution is neutral, colorless, transparent, odorless, and tasteless. Very stable to heat, acid, and mechanical treatment. In solid matter, it cannot be digested by human digestive enzymes, and the decomposed high molecular weight substances and galactomannanase decomposition products account for more than 80%.
| Item | Especificação |
| pureza | 80% |
| solubilidade | H2O: 1 mg/mL ， 20 °C |
| formulário | pó |
| Condições de armazenamento | temperatura de quarto |
| MW | 0 |
CAROB GALACTOMANNAN is a plant cell wall polysaccharide used as a reference compound for analyzing the composition program of plant cell wall polysaccharides. D-galactose-D-mannan is a potential antioxidant that protects plant cell walls.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Ammonium Dihydrogen Phosphate CAS 7722-76-1
Ammonium Dihydrogen Phosphate CAS 7722-76-1 is an efficient fertilizer widely used in vegetables, fruits, rice, and wheat. Colorless and transparent tetragonal crystal. Easy to dissolve in water, slightly soluble in alcohol, insoluble in acetone.
| Item | Padrão |
| N+P2O5 % | ≥73 |
| N % | ≥11 |
| P2O5% | ≥60 |
| umidade | ≤0.5 |
| PH value of 1% solution | 4.0-5.0 |
| Water Soluble % | ≤0.1 |
| As （ppm） | / |
| Pb （ppm） | / |
| Cd （ppm） | / |
| Cr （ppm） | / |
| Hg （ppm） | / |
1.Ammonia Dihydrogen Phosphate MAPis mainly used to prepare compound fertilizer, and can also be directly applied to farmland.
2.Ammonia Dihydrogen Phosphate MAPis mainly used as an analytical reagent and a buffer.
3.Ammonia Dihydrogen Phosphate MAPis mainly used as a leavening agent, dough conditioner, yeast foodstuff, brewing fermentation aid, buffer in the food industry. Also used as an animal feed additive.
4. Ammonia Dihydrogen Phosphate MAPis mainly used as fertilizer, fire retardant, also used in printing plate making, medicine and other industries.
5. Prepare buffer and medium to prepare flame retardant and dry powder fire extinguishing agent for phosphate, phosphor, wood, paper and fabric.
6. Ammonia Dihydrogen Phosphate MAPcan be used as flame retardant for wood, paper and fabric, dispersant for fiber processing and dye industry, compounding agent for fire retardant coating, dry powder fire extinguishing agent, etc.
Ammonia Dihydrogen Phosphate MAP is a high-efficiency nitrogen and phosphorus compound fertilizer. It can be used as flame retardant for wood, paper and fabric, dispersant for fiber processing and dye industry, glaze for enamel, compounding agent for fire retardant coating, cockroach for matchstick and candle core, dry powder fire extinguishing agent. Also used in printing plate making and pharmaceutical manufacturing.
25KG/BAG
N6-(delta 2-Isopentenyl)-adenine CAS 2365-40-4
CAS:2365-40-4
Molecular Formula:C10H13N5
Molecular Weight:203.24
EINECS:812-988-8
Synonyms:6-(GAMMA,GAMMA-DIMETHYLALLYLAMINO)-PURINE; 6-(3,3-DIMETHYLALLYLAMINO)PURINE; 2IP; N6-[2-ISOPENTENYL]ADENINE; N6-(DELTA2-ISOPENTENYL)ADENINE; TRIACANTHINE; 2-iP N6-(2-Isopentenyl)adenine; 6-(GAMMA,GAMMA-DIMETHYLALLYLAMINO)*PURIN E COMMERCIA; 6-(GAMMA,GAMMA-DIMETHYLALLYLAMINO)*PURIN E PLANT CEL; 6-(GAMMA,GAMMA-DIMETHYLALLYLAMINO)*PURIN E, PLANT CE
N6- (delta 2-Isopentenyl) – adenine, as a unique structure and biologically active adenine derivative, is a hormone organic compound that can be used as a plant growth regulator. Isopentene adenine promotes cell division and differentiation; Outstanding anti-aging effect on plant tissues; Promote organ formation; Promote flower bud differentiation, induce heteroecious fruiting, and increase fruit setting rate.
| Item | Especificação |
| Ponto de ebulição | 318.1±52.0 °C(Predicted) |
| Densidade | 1.28±0.1 g/cm3(Predicted) |
| Ponto de fusão | 218-220 °C |
| os valores de pKa | 9.36±0.20(Predicted) |
| Condições de armazenamento | -20°C |
N6- (delta 2-Isopentenyl) – adenine is a bacterial derived riboside cytokinin that can be used for the growth of plant tissues such as tobacco and soybean crusts
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Chondroitin sulfate CAS 9007-28-7
CAS:9007-28-7
Molecular Formula:C13H21NO15S
Molecular Weight:463.36854
EINECS:232-696-9
Synonyms:CHONDROITIN SULPHATE; CHONDROITINE SULPHATE; CHONDROITIN HYDROGEN SULFATE; CHONDROITIN SULFATE (BOVINE ORIGIN); CHONDROITIN SULFATE (BOVINE) 85% MIN. DRY BASIS; CHONDROITIN SULFATE OPTHALMIC GRADE; CHONDROITINESULFATEEXSHARK; Chondroitin sulfate sodium salt from shark cartilage; Chondroitin sulfate;CHONDROITIN SULFATE CONTROL SAMPLE(XRM)
Chondroitin sulfate is a white or slightly yellow amorphous powder. Easy to dissolve in water, insoluble in organic solvents. It is hygroscopic, odorless, and tasteless. Chondroitin sulfate is used to treat conditions such as coronary atherosclerosis, hyperlipidemia, hypercholesterolemia, angina pectoris, myocardial ischemia, and myocardial infarction
| Item | Especificação |
| MW | 463.36854 |
| Pureza | 99% |
| SOLÚVEL | Solúvel em água. |
| Condições de armazenamento | Guarde-o em RT. |
Chondroitin sulfate is a viscous polysaccharide extracted from animal cartilage, which plays an important role in the prevention and treatment of cardiovascular and joint diseases, and is currently one of the most important biochemical products on the market. Chondroitin sulfate is used to treat neuropathic pain, neuropathic migraine, joint pain, arthritis, scapular pain, and pain after abdominal surgery.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
2-Methyl-5-nitroimidazole CAS 88054-22-2
CAS:88054-22-2
Molecular Formula:C4H5N3O2
Molecular Weight:127.1
EINECS:618-108-7
Synonyms:2-Methyl-5-nit; 2-methyl-5-nitroimidazole Solution, 100ppm; 2-METHYL-4(5)-NITROIMIDAZOLE; 2- METHYI-5-NITROIMDAZOLE; 2-Methy1-5-Nitroimidazole; METHYLNITROIMIDAZOLE; 1H-Imidazole,2-methyl-5-nitro-(9CI); 2-Methyl-5-nitroimidazole; 2-METHYL-5-NITROIMIDAZOLEMETRONIDAZOLE; 2-Methyl-5-nitroimid; Carapax Trionycis
2-Methyll-5-nitroimidazole crystals. Melting point 252-254 ℃. Used for the preparation of drugs metronidazole and metronidazole, it is an important raw material for the production of metronidazole, metronidazole, and secnidazole, and is a typical specialized fine chemical intermediate.
| Item | Especificação |
| Ponto de ebulição | 0°C |
| Densidade | 1.426 |
| Ponto de fusão | 252 °C |
| Ponto de inflamação | 0°C |
| Condições de armazenamento | Geladeira |
2-Methyll-5-nitroimidazole is used as an intermediate in the organic synthesis and synthesis of metronidazole, metronidazole, and other drugs. 2-Methyll-5-nitroimidazole is used to prepare drugs metronidazole and metronidazole
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
mono-Methyl terephthalate CAS 1679-64-7
CAS:1679-64-7
Molecular Formula:C9H8O4
Molecular Weight:180.16
EINECS:216-849-7
Synonyms:4-(Methoxycarbonyl)benzoic acid, Methyl 4-carboxybenzoate; MonomethyLTerephthaL; METHYL HYDROGEN TEREPHTHALATE; Monomethyl ester; Tetraphthalic acid; Mmt(Mono-MethylTerephthalate); MMT; Mono-methyl; terephthalate (MMT); m-Methyl terephthalate ,97%; Mono-methyl terephth; mono-Methyl terephthalate, Methyl 4-carboxybenzoate
Mono Methyl terephthalate is a chemical substance, abbreviated as MMT, which is a white to off white powdery substance that can be prepared from dimethyl terephthalate. It is the main product of the decomposition of dimethyl terephthalate.
| Item | Especificação |
| Ponto de ebulição | 232.96°C (rough estimate) |
| Densidade | 1.1987 (rough estimate) |
| Ponto de fusão | 220-223 °C (lit.) |
| os valores de pKa | 3.77±0.10(Predicted) |
| Condições de armazenamento | Selado em seco,Temperatura de Quarto |
Monomethyl terephthalate is an important pharmaceutical and chemical intermediate used as a gasoline anti knock agent
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:108050-54-0
Molecular Formula:C46H80N2O13
Molecular Weight:869.15
EINECS:639-676-2
Synonyms:Tilmicosin USP/EP/BP; Timicosin; Dianthi extract; Tilmicosin (API); Tilmicosin (1667370); Timicoxin; pulmotil; TILMICOSIN; Tilmicosin, Vetranal; Tilmicosine
Tilmicosin white or white powder humidity: ≤ 5.0%. It is soluble in methanol, acetonitrile, and acetone, soluble in ethanol and propylene glycol, and insoluble in water.
| Item | Especificação |
| Ponto de ebulição | 926.6±65.0 °C(Predicted) |
| Densidade | 1.18±0,1 g/cm3(Previsto) |
| Ponto de fusão | >97°C (dec.) |
| os valores de pKa | pKa (66% DMF): 7.4, 8.5(at 25℃) |
| Condições de armazenamento | Atmosfera inerte,Armazenar em freezer sob temperatura de -20°C |
Tilmicosin is a semi synthetic livestock specific antibiotic derived from the hydrolysis product of Tylosin. It belongs to the macrolide class along with Tylosin and Tyvancin, and is mainly used to treat infections caused by pleuropneumonia, actinomycetes, Pasteurella, and mycoplasma.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:61991-54-6
Molecular Formula:C47H80O17.H3N
Molecular Weight:934.163
EINECS:1806241-263-5
Synonyms:Maduramicin USP/EP/BP； Madurmycin； maduranmicinammonium1%
Maduramicin is a polyether antibiotic extracted from actinomycete culture medium, commonly used as its ammonium salt. It is a white crystalline powder, slightly soluble in water, easily soluble in chloroform, methanol, ethanol, and stable in acidic media. Melting point 165-167 ℃.
| Item | Especificação |
| MW | 934.163 |
| Pureza | 95% |
| Ponto de fusão | 305-310 ºC |
| EINECS | 1806241-263-5 |
Maduramicin is a new type of anti coccidioid drug and currently the most potent and low-dose polyether anti coccidioid drug. It is effective against most Gram positive bacteria and can interfere with the early stages of the coccidioid life cycle.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
1,2,4-Trifluoro-5-nitrobenzene CAS 2105-61-5
CAS:2105-61-5
Molecular Formula:C6H2F3NO2
Molecular Weight:177.08
EINECS:218-281-5
Synonyms:2,4,5-Trifluoro-1-nitrobenzene; 2,4,5-TRIFLUORONITROBENZENE; 1,2,4-TRIFLUORO-5-NITROBENZENE; Benzene, 1,2,4-trifluoro-5-nitro; 2,4,5-Trifluoro-5-nitrobenzene; 1-Nitro-2,4,5-trifluorobenzene; 4-chloro-2-flurophenol; 2,4,5-Trifluoronitrobenzene 98%; 2,4,5-Trifluoronitrobenzene98%; 2,4,5-TRIFLUOROBENZENE
1,2,4-Trifluoro-5-nitrobenzene is a colorless liquid. Boiling point 194 ℃ -195 ℃, melting point -11 ℃, flash point 89 ℃, refractive index 1.4943, specific gravity 1.544.
| Item | Especificação |
| Ponto de ebulição | 194-195 °C (lit.) |
| Densidade | 1.544 g/mL at 25 °C (lit.) |
| Ponto de fusão | -11 °C (lit.) |
| índice de refração | 1.493-1.495 |
| Condições de armazenamento | 2-8°C |
1,2,4-Trifluoro-5-nitrobenzene is mainly used as a pharmaceutical intermediate
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
2-Methyl-1-propanol CAS 78-83-1
2-Methyl-1-propanol is also called isopropyl methanol and 2-methyl propanol, with molecular formula C4H10O. Molecular weight 74.12. It is a colorless liquid with a special smell, and one of the main components of the aroma of fresh tea leaves, black tea and green tea. Boiling point 107.66℃. Relative density 0.8016 (20/4℃). Refractive index 1.3959. Flash point 37℃. It is miscible with alcohol and ether, and slightly soluble in water.
| ITEM | PADRÃO |
| Pureza % ≥ | 99.3 |
| De cromaticidade Hazen(Pt-Co) ≤ | 10 |
| Density(20℃) g/cm3 | 0.801-0.803 |
| Acidity(as acitic acid) % ≤ | 0.003 |
| Conteúdo De Água % ≤ | 0.15 |
| Evaporation Residue% ≤ | 0.004 |
165kg/drum
CAS:7681-82-5
Molecular Formula:NaI
Molecular Weight:149.89
EINECS:231-679-3
Synonyms:SODIUM IODIDE; UV-VIS STANDARD 3; UV-VIS STANDARD 3: SODIUM IODIDE; Anayodin; Hydriodic acid sodium salt; ioduredesodium; Ioduril; Jodid sodny; jodidsodny; natriiiodidum; Natriumjodid; Sodium iodide (NaI); Sodium iodine; Sodium monoiodide; sodiumiodide(nai)
Sodium iodide is a white solid formed by reacting sodium carbonate or sodium hydroxide with hydroiodic acid and evaporating the solution. It contains anhydrous, dihydrate, and pentahydrate. It is used as a raw material for iodine production, in medicine and photography. The acidic solution of sodium iodide exhibits reducibility due to the generation of hydroiodic acid.
| Item | Especificação |
| Ponto de ebulição | 1300 °C |
| Densidade | 3.66 |
| Ponto de fusão | 661 °C (lit.) |
| os valores de pKa | 0.067[at 20 ℃] |
| PH | 6-9 (50g/l, H2O, 20℃) |
| Condições de armazenamento | Guarde-o em +5°C a +30°C. |
Sodium iodide is a white powder with the chemical formula NaI. It has a wide range of applications and can be paired well with the photocathode of photomultiplier tubes using the excellent optical properties of sodium iodide to prepare optical devices with high luminous efficiency. With the properties and low price of sodium iodide, it is widely used in fields such as petroleum exploration, security inspection, and environmental monitoring.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
4-Aminohippuric acid CAS 61-78-9
CAS:61-78-9
Molecular Formula:C9H10N2O3
Molecular Weight:194.19
EINECS:200-518-9
Synonyms:4-AMINOBENZOYL GLYCINE; 4-AMINOHIPPURIC ACID; 2-[4-AMINOPHENYLCARBOXYAMINO]-ACETIC ACID; LABOTEST-BB LT00053657; MIXTURE NO 6-POLYNUCLEAR AROMATIC; HYDROCARBONS; N-4-AMINOHIPPURIC ACID; N-(4-AMINOBENZOYL)AMINOACETIC ACID; N-(4-AMINOBENZOYL)GLYCINE; N-(P-AMINOBENZOYL)-AMINOACETIC ACID; N-[P-AMINOBENZOYL]GLYCINE;POLYNUCLEAR AROMATIC HYDROCARBONS
4-Aminohippuric acid is a gray white to light gray crystalline powder, which is a diagnostic agent used for kidney testing and in the determination of renal plasma flow.
| Item | Especificação |
| Ponto de ebulição | 330.62°C (rough estimate) |
| Densidade | 1.356 |
| Ponto de fusão | 199-200 °C (dec.)(lit.) |
| os valores de pKa | pKa 3.8 (Uncertain) |
| PH | 3.0-3.5 (20g/l, H2O, 20℃) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
4-Aminohippuric acid is used as an intermediate in organic synthesis. Biochemical research. Renal function diagnostic agent. 4-Aminohippuric acid can also be applied in luminescent materials and pharmaceuticals
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
THYROID POWDER PORCINE CAS 50809-32-0
THYROID POWDER PORCINE CAS 50809-32-0 is a white powder. THYROID, PORCINE molecular weight is 798.85185 and molecular formula is C15H10I4NNaO4.
| ITEM | PADRÃO |
| Aparência | White power |
| MW | 798.85185 |
| MF | C15H10I4NNaO4 |
| EINECS | 209-271-1 |
THYROID, PORCINE is can be used to treat human diseases such as hypothyroidism, cretinism, myxoma, thyroid tumor and obesity.
25KG/DRUM
2-Methoxy-3-isobutyl pyrazine CAS 24683-00-9
2-Methoxy-3-isobutylpyrazine belongs to the pyrazine class of compounds and is a metabolite found or produced in Saccharomyces cerevisiae.
| ITEM | PADRÃO |
| Ponto de inflamação | 176 °F |
| Ponto De Ebulição | 294.44°C |
| Densidade | 0.99 g/mL at 25 °C |
| Aparência | Líquido |
| Cor | Incolor |
| Acidez coeficiente (pKa) | 0.80±0.10(Predicted) |
2-Methoxy-3-isobutyl pyrazine is used as daily and edible flavor.
25KG/DRUM
![Dibenz[b,f]azepine-5-carbonyl chloride CAS 33948-22-0-pack](https://unilongindustry.com/wp-content/uploads/2024/09/unilong-product-pack-13.jpg)
Sulfonic acids OSS CAS 61789-86-4
Sulfonic acids are brown-red liquids. The lubricating oil for internal combustion engines prepared with them can effectively reduce high-temperature deposits on engine parts, effectively protect the engine for a long time, avoid acid corrosion of parts, and extend the oil change period. It has excellent high-temperature detergency and acid neutralization ability, as well as good anti-rust performance and high alkali reserve capacity.
| Itens
|
Índice de | Método de ensaio |
| Aparência | Líquido castanho
|
visual inspection |
| viscosidade
（100℃），mm2/s |
50-150 | NB/SH/T 0870、ASTM D7042 |
| TBN，mgKOH/g | 395-420 | SH/T 0251、ASTM D2896 |
| Ca，% | 14.5-16.5 | NB/SH/T 0824、ASTM D4951 |
| Sulfur，% | ≥1.20 | SH/T 0689、ASTM D5453 |
| moisture，% | ≤0.30 | GB/T 260、ASTM D95 |
| Chroma (dilution) | ≤5.0 | GB/T 6540、ASTM D1500 |
| turbidity（20%），NTU | ≤30.00 | NB/SH/T0982 |
| mechanical impurities，% | ≤0.08 | GB/T 511 |
200 kg/tambor
Optical Brightener OB CAS 7128-64-5
2,5-Bis(5-tert-butyl-2-benzoxazolyl)thiophene is yellow-green powder. The melting point is 200 ~ 201℃, and the decomposition temperature is greater than 220℃. Insoluble in water, soluble in alkanes, fats, mineral oils, waxes and common organic solvents.
Optical Brighter OB used for brightening polyvinyl chloride, polystyrene, ABS resin, polyolefin and polyester, also used for acetate fiber, polymethyl methacrylate, foam leather whitening. Also used in varnishes, paints, UV-curable coatings, printing inks, fats, oils, packaging materials. It can be used as anti-counterfeiting mark in printing ink. In photography, it can be used to improve the whiteness of the non-image area of the photo, which can be converted into fluorescence when the photo is irradiated by ultraviolet light. Produce brightening effect.
| Produto Nome | Óptica brightener OB (C.I. 184 / C.I.28 ) | |
| MF | C26H26N2O2S | |
| EINECS No | 230-426-4 | |
| CAS No | 7128-64-5, | |
| Chemical Name | 2,5-bis(5-tert-butyl benzoxazoly-2’-)thiophene | |
| Aparência | Light green powder | |
| Pureza | ≥98% | |
| Ponto de fusão | 198~202 °C | |
| Volatile: | <0.5% | |
| Pacote | 20kg per carton, 25/30kg per fiber drum with PE liner, or as per the customers’ requirements. | |
| Aplicações:
It is widely used in thermoplastic such as PVC, PE, PP, ABS, PS, and unsaturated resin and paint, ink and oil solúvel coatings. |
||
| Propriedades:
The product is light green or green powder, non-toxic and tasteless, can dissolve in alkane, fat, mineral oil, paraffin and most organic solvents, the absorption spectra of the largest value for 375 mm (in ethanol). |
||
| Dosage:
PVC whitening: 0.01~0.05%; Polystyrene :0001~0.001%; Polyolefin matrix: 0.0005~0.001% |
to improve the light intensity: 0.0001~0.001% ABS:0.01~0.05%; White matrix: 0.005~0.05% |
|
Mainly used for brightening synthetic fiber and plastic products, and has obvious effect on colorful plastic products, and is also used for PE, PP, PVC, PS, ABS and so on.
25kg/saco
Poliacrilato de sódio CAS 9003-04-7
Sodium polyacrylate is a white powder. Odorless and tasteless. Extremely hygroscopic. A polymer compound having hydrophilic and hydrophobic groups. Slowly soluble in water to form a very viscous transparent liquid, the viscosity of 0.5% solution is about Pa•s, viscous and due to water absorption swelling (such as CMC, sodium alginate) produced, but due to the ionic phenomenon of many anionic groups within the molecule to increase the molecular chain, the performance of viscosity increases and form a highly viscous solution. Its viscosity is about 15-20 times that of CMC and sodium alginate. Heating treatment, neutral salts and organic acids have little effect on its viscosity, while alkaline viscosity increases. Insoluble in organic solvents such as ethanol. Strong heat to 300 degrees does not decompose. Long-lasting viscosity changes very little, not easy to corrupt. Due to the electrolyte, it is susceptible to acid and metal ions, and the viscosity is reduced.
| ITEM | PADRÃO |
| Aparência | Colorless to light yellow transparent liquid |
| Solid content% | 50.0 min |
| Free monomer ( CH2=CH-COOH) % |
1.0max |
| pH (as it) | 6.0-8.0 |
| Density (20℃) g/cm3 | 1.20 min |
25kg/saco
CAS:8049-47-6
Fórmula Molecular:N/A
Peso Molecular:0
EINECS:232-468-9
Synonyms:intrazyme; PANCREATIN; PANCREATIN, 3X; PANCREATIN 4X NF; PANCREATIN 4X USP GRANULAR; PANCREATIN 8X USP GRANULAR; PANCREATIN 8X USP POWDER; PANCREATIN, ACTIVITY AT LEAST*EQUIVALENT TO 3X U.S.; PANCREATIN FROM HOG PANCREAS
Pancritin is a white or slightly yellow powder that is partially soluble in water. The aqueous solution is stable at pH 2-3 and unstable above pH 6. The presence of Ca2+can increase its stability. Partially soluble in low concentration ethanol solution, insoluble in high concentration organic solvents such as ethanol, acetone, and ether, with a slight odor but no moldy odor, and has hygroscopicity. When exposed to acid, heat, heavy metals, tannic acid and other protein precipitants, precipitation occurs and enzyme activity is lost.
| Item | Especificação |
| Pureza | 99% |
| Densidade | 1.4-1.52 |
| Pressão de Vapor | 0Pa em 25℃ |
| Condições de armazenamento | -20°C |
| MW | 0 |
Pancritin can be used as a digestive aid; Mainly used for digestive disorders, loss of appetite, digestive disorders caused by pancreatic diseases, and digestive disorders in patients with urinary disorders. It is also used in the leather industry and textile printing and dyeing, mainly for enzymatic hair removal.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Acid modified starch CAS 68412-29-3
CAS:68412-29-3
Molecular Formula:(C6H10O5)n
Peso Molecular:0
EINECS:232-679-6
Synonyms:Starch solution; Acid modified, corn starch; Acid modified,corn starch; Wheat starch, acidmodified; HYDROLYSEDSTARCH; ACID-TREATEDSTARCHES; ACID-TREATEDSTARCH; AMYLUM; AMIDON; MAIS STARCH; ARROW ROOT STARCH; DEXTRIN POTATO WHITE; CORN STARCH; RICE STARCH
Acid modified starch white powder. The characteristic is high water solubility and strong coagulation. Stabilizer; Thickening agent; Fillers; Mainly used for “starch gummies”.
| Item | Especificação |
| Pureza | 99% |
| Densidade | 1.005 g/mL at 25 °C |
| Ponto de fusão | 256-258 °C (dec.)(lit.) |
| Cor | Clear to slightly hazy |
| MW | 0 |
Acid modified starch has anti-cancer and anti-tumor effects, and also has a relatively good effect on diabetes. Its water resistance has increased, showing significant softness and strength.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Tetrafluoroterephthalonitrile CAS 1835-49-0
CAS:1835-49-0
Molecular Formula:C8F4N2
Peso Molecular:200.09
EINECS:217-397-3
Synonyms:1,4-Dicyano-2,3,5,6-tetrafluorobenzene;1,4-Dicyanotetrafluorobenzene; PTFEtwo of benzenenitrile; 2,3,5,6-tetrafluoro-4-benzenedicarbonitrile; Diamond 2031; diamond2031; Terephthalonitrile, tetrafluoro-; tetrafluoroterephthalodinitrile; TETRAFLUOROTEREPHTHALONITRILE; PERFLUOROTEREPHTHALONITRILE
Tetrafluoroterephthalate has a melting point of 197 ° C to 199 ° C, a density of 1.5, and appears as a white solid at room temperature and pressure. It can be used as an intermediate in organic synthesis and medicinal chemistry. Tetrafluorobenzonitrile is soluble in hot ethanol, but its solubility in water is poor.
| Item | Especificação |
| Ponto de ebulição | 243.3±40.0 °C(Predicted) |
| Densidade | 1.6184 (estimate) |
| Ponto de fusão | 197-199 °C (lit.) |
| Condições de armazenamento | 2-8°C |
| MW | 200.09 |
Tetrafluoroterephthalonitrile is an intermediate in organic synthesis, pharmaceutical chemistry, and materials chemistry. As an intermediate in organic synthesis, the cyanide group in its structure is a good and easily convertible functional group, which can be converted into carboxylic acids and amine compounds.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:55779-48-1
Molecular Formula:C26H21N3O3
Molecular Weight:423.46
EINECS:NA
Synonyms:2-(BETA-NAPHTHYLMETHYL)-6-(P-HYDROXYPHENYL)-8-BENZYLIMIDAZO[1,2-A]PYRAZINE-3-(7H)-ONE; COELENTERAZIN N; Coelenteramine; COELENTERAZINE; COELENTERAZINE N; COELENTERAZINE, NATIVE; COELENTERAZINE-N, SYNTHETIC; CLZ-N CLZN-N; H COELENTERATE LUCIFERIN; NATIVE COELENTERATE LUCIFERIN
Coelenterazine is a viscous yellow solid and the most common marine fluorescein. It is also a light energy storage molecule for the vast majority of marine bioluminescent organisms. Soluble in methanol and ethanol
| Item | Especificação |
| Ponto de ebulição | 641.4±65.0 °C(Predicted) |
| Densidade | 1.32±0.1 g/cm3(Predicted) |
| Ponto de fusão | 176–181 ℃ (decompose) |
| os valores de pKa | 9.91±0.15(Predicted) |
| λmax | 429nm |
| Condições de armazenamento | -20°C |
Coelenterazine is the luminescent group of the natural jellyfish luminescent protein complex and a substrate for marine luciferase. For experiments where rapid substrate regeneration is important, it is recommended to use natural colistin.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
3-Hexyn-2,5-diol CAS 3031-66-1
CAS:3031-66-1
Fórmula Molecular:C6H10O2
Peso Molecular:114.14
EINECS:221-209-5
Synonyms:BIS(1-HYDROXYETHYL)ACETYLENE; 3-HEXYNE-2,5-DIOL, DL AND MESO; 3-HEXYNE-2,5-DIOL; 3-hexyn-2,5-diol; Di(1-hydroxyethyl)acetylene; 3-HEXYNE-2,5-DIOL, 97%, MIXTURE OF (+/-) -AND MESO ISOMERS; 3-Hexyne-2,5-diol, dl + meso, 97%; NISTC3031661; 3-Hexin-2,5-diol; Hexyne-3-diol-2,5; (2R,5R)-3-hexyne-2,5-diol
3-Hexyn-2,5-diol has a light yellow oily color and is soluble in chloroform (a small amount) and methanol (a small amount). It is used as a secondary brightener for bright and semi bright nickel plating solutions
| Item | Especificação |
| Ponto de ebulição | 121 °C15 mm Hg(lit.) |
| Densidade | 1.009 g/mL at 25 °C(lit.) |
| Ponto de fusão | 42 °C(lit.) |
| ponto de inflamação | >230 °F |
| resistividade | n20/D 1.473(lit.) |
| Condições de armazenamento | 2-8°C |
3-Hexyn-2,5-dio is used as a brightener additive in the electroplating industry and as an inhibitor of aluminum anodization. As a secondary brightener for bright and semi bright nickel plating solutions, its usage concentration ranges from 0.1-0.3g/l
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Dibenz[b,f]azepine-5-carbonyl chloride CAS 33948-22-0
CAS:33948-22-0
Molecular Formula:C15H10ClNO
Molecular Weight:255.7
EINECS:412-100-5
Synonyms:CHLOROCARBONYL LIMINOSTILBEN; DIBENZ [B,F]AZEPINE-5-CARBONYL CHLORIDE; IMINOSTILBENE-5-CARBONYL CHLORIDE; IMINOSTILBENE CARBONYL CHLORIDE; 5-chlorocarbonyl iminostilbene; 5H-DIBENZ[B,F]AZEPINE-5-CARBONYL CHLORIDE; 5-(Chlorocarbonyl)-5H-dibenzo[b,f]azepine; N-Chlorocarbonyliminostilbene; IMINOSTILBENE CARBONYL CHLORIDE (BROMINE FREE)
Crystalline iminobenzenyl chloride (toluene). Melting point 168-169 ℃. Dissolved in chloroform, dichloromethane, and ethyl acetate, it is a pharmaceutical intermediate and a key intermediate for the synthesis of carbamazepine and opipramol.
| Item | Especificação |
| Melting pointt | 149-153 °C (lit.) |
| Densidade | 1.316±0.06 g/cm3(Predicted) |
| MW | 255.7 |
| os valores de pKa | -3.69±0.20(Predicted) |
Dibenz [b, f] azepine-5-carbonyl chloride is used as a pharmaceutical intermediate, mainly for the synthesis of carbamazepine and other drugs
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:3380-34-5
Molecular Formula:C12H7Cl3O2
Molecular Weight:289.54
EINECS:222-182-2
Synonyms:2,4,4′-TRICHLORO-2′-HYDROXYDIPHENYL ETHER; 2,4,4-TRICHLORO-2-HYDROXYDIPHENYL ETHER; TRICLOSAN; trichloro-2′-hydroxydiphenylether; TROX-100; TRICHLOSAN; TRICLOSAN USP; 2,4,4’Trichloro2′-HydroxyDiphenyaxide; 2,4,4′-Trichloro-2-2′ Hydroxy Diphenyl Ether; 2,4,4′-Trichloro-2′-hydroxydiphenyl ether (Triclosan)
Triclosan is a colorless needle shaped crystal. Melting point 54-57.3 ℃ (60-61 ℃). Slightly soluble in water, soluble in ethanol, acetone, ether, and alkaline solutions. There is a smell of chlorophenol. Used for the production of high-end daily chemical products, as well as the formulation of equipment disinfectants and fabric antibacterial and deodorizing finishing agents in the medical and catering industries.
| Item | Especificação |
| Melting pointt | 56-60 °C(lit.) |
| Densidade | 1.4214 (rough estimate) |
| índice de refração | 1.4521 (estimate) |
| Condições de armazenamento | 2-8°C |
| Pressão de Vapor | 0.001 Pa em 25℃ |
| os valores de pKa | 7.9(at 25℃) |
Triclosan, as a broad-spectrum antibacterial agent, is widely used in textiles, medical devices, children’s toys, and many personal care products such as toothpaste, soap, and facial cleansers. Triclosan has estrogenic effects and high lipophilicity, and can be absorbed into the body through the skin, oral mucosa, and gastrointestinal tract
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:12122-67-7
Molecular Formula:C4H6N2S4Zn
Molecular Weight:275.75
EINECS:235-180-1
Synonyms:asporum; bercema; blightox; blizene; carbadine; carbamodithioicacid,1,2-ethanediylbis,zincsalt; caswellnumber930; chemzineb; ((1,2-ethanediylbis(carbamodithioato))(2-))-zin; cineb; crystalzineb; cynkotox; novozinn50; novozir; novozirn; novozirn50; pamosol2forte
Zineb is a white crystal, and industrial products are white to light yellow powders. Vapor pressure<10-7Pa (20 ℃), relative density 1.74 (20 ℃), flash point>100 ℃. Soluble in carbon disulfide and pyridine, insoluble in most organic solvents, and insoluble in water (10mg/L). Unstable to light, heat, and moisture, and prone to decomposition when exposed to alkaline substances or copper. Ethylene thiourea is present in the decomposition products of zinc oxide, which is highly toxic.
| Item | Especificação |
| Melting pointt | 157°C (rough estimate) |
| Densidade | 1.74 g/cm3 |
| Ponto de inflamação | 90℃ |
| Condições de armazenamento | 2-8°C |
| Pressão de Vapor | <1x l0-5 at 20 °C |
Zineb foliar protective fungicide is mainly used to prevent and control various fungal diseases in crops such as wheat, vegetables, grapes, fruit trees, and tobacco. It is a broad-spectrum and protective fungicide. Zineb can be used to prevent and control various diseases of crops such as rice, wheat, vegetables, grapes, fruit trees, tobacco, etc
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
1-Bromo-3-methoxypropane CAS 36865-41-5
CAS:36865-41-5
Molecular Formula:C4H9BrO
Molecular Weight:153.02
EINECS:NA
Synonyms:3-METHOXYPROPYLBROMIDE; 1-BROMO-3-METHOXYPROPANE; 1-BROMO-3-METHOXYPROPANE 99%; 3-BROMO-1-METHOXYPROPANE; 3-Bromopropyl methyl ether; 1-Bromo-3-methoxypropane ,98%; 1-broMo-3-Methoxyproane; 1-BroMo-3-Methoxypro; 1-Bromo-3-methoxypropane for synthesis; 1-BroMo-3-Methoxypropane, 97+%; 3 – broMine propyl Methyl ether
1-Bromo-3-methoxypropane is a colorless to extremely light transparent yellow liquid at room temperature and pressure. It is a commonly used alkylating agent and a key synthetic intermediate for the drug molecule brinzomib, which is used to treat high intraocular pressure and open-angle glaucoma.
| Item | Especificação |
| Ponto de ebulição | 132°C |
| Densidade | 1.36 g/cm3 |
| índice de refração | 1.4450-1.4490 |
| PH | 6-7 (H2O) |
| Condições de armazenamento | Manter em local escuro |
1-Bromo-3-methoxypropane can be used as an intermediate in medicinal chemistry and organic synthesis, such as in the preparation of small molecule brinzolamide for drugs. Brinzolamide eye drops are currently a good medication for treating high intraocular pressure and relieving elevated intraocular pressure in patients with open-angle glaucoma. In organic synthesis, the easy leaving property of bromine units is mainly utilized as alkylating agents to protect oxygen or nitrogen atoms.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:118-75-2
Molecular Formula:C6Cl4O2
Molecular Weight:245.88
EINECS:204-274-4
Synonyms:P-CHLORANIL; SPERGON; SPERGON I; SPERGON(R); TETRACHLOROQUINONE; TETRACHLORO-1,4-BENZOQUINONE; TETRACHLORO BENZOQUINONE; TETRACHLORO-P-BENZOQUINONE;TETRACHLORO-P-QUINONE; 4-CHLORANIL
Chloronil is a golden leaf shaped crystal. Melting point 290 ℃. Soluble in ether, slightly soluble in alcohol, insoluble in chloroform, tetrachlorocarbon, and carbon disulfide, almost insoluble in cold alcohol, insoluble in water.
| Item | Especificação |
| Ponto de ebulição | 290.07°C (rough estimate) |
| Densidade | 1,97 g/cm3 |
| Ponto de fusão | 295-296 °C (dec.) |
| ponto de inflamação | >100℃ |
| PH | 3.5-4.5 (100g/l, H2O, 20℃)(slurry) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
The main applications of Chloronil: In the materials industry, it can be used as a pigment intermediate and also for synthesizing certain dyes; In agriculture, it can be used as a fungicide to treat crop seeds and bulbs, which can prevent and control bacterial diseases; It can also be used as a textile additive, an antioxidant and anti-static agent to prevent polyethylene oxidation, a crosslinking agent for epoxy resin copolymers, a matching electrode for pH measurement, as well as a promoter and reinforcing agent for rubber, plastics, etc.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:371-41-5
Molecular Formula:C6H5FO
Molecular Weight:112.1
EINECS:206-736-0
Synonyms:p-Fluorphenol; Phenol, p-fluoro-; 4-FLUOROPHENOL; AKOS BBS-00004253; P-FLUOROPHENOL; Fluorophenoloffwhiteflakes; 4-Fluorophenyl alcohol; 4-fluoro-Phenol p-Fluoro phenol p-fluoro-pheno; 4-fluoro-pheno Fluorophenol; p-fluoro-pheno; 4-Fluorphenol; p-Fluorohenol
4-Fluorophenol is a light yellow crystalline solid at room temperature and pressure, with significant acidity. Due to the strong electron withdrawing properties of fluorine atoms, its acidity is much greater than that of pure phenol. 4-fluorophenol can react with acids or bases to form corresponding salts. It can undergo oxidation reactions under the action of oxidants, generating corresponding phenolphthalein compounds.
| Item | Especificação |
| Ponto de ebulição | 185 °C (lit.) |
| Densidade | 1.22 |
| Ponto de fusão | 43-46 °C (lit.) |
| ponto de inflamação | 155 °F |
| os valores de pKa | 9.89(at 25℃) |
| Condições de armazenamento | Manter em local escuro |
4-Fluorophenol is an important pharmaceutical and pesticide intermediate used in the pharmaceutical industry for the synthesis of insecticides, gastrointestinal drugs, and antiviral drugs. It is also used in agriculture for the synthesis of herbicides, plant growth regulators, and as an algaecide in environmental engineering.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:372-20-3
Molecular Formula:C6H5FO
Molecular Weight:112.1
EINECS:206-748-6
Synonyms:3-FLUOROPHENOL FOR SYNTHESIS 10 ML; Between fluorine and phenol; 3-Fluorophenol>; 3-Fluorophenol ISO 9001：2015 REACH; 3-Fluorophenol pure, 98%; 3 – fluorine phenol; 3-Fluoro Phennol; M-FLUOROPHENOL; 3-FLUOROPHENOL; 3-Fluorphenol; Phenol, m-fluoro-; Fluorophenolcolorlessliq; 3-Fluorophenol m-Fluorophenol; 3-Fluorophenol,98%; 1-Bromo-4-fluorobezene
3-Fluorophenol is an organic compound, which can be prepared by various methods and is a clear colorless to light yellow brown liquid. Boiling point: 178 ℃, melting point: 14 ℃, flash point: 71 ℃, refractive index: 1.5140, specific gravity: 1.236. Used as an intermediate for pharmaceuticals, pesticides, and dyes
| Item | Especificação |
| Ponto de ebulição | 178 °C (lit.) |
| Densidade | 1.238 g/mL at 25 °C (lit.) |
| Ponto de fusão | 8-12 °C (lit.) |
| ponto de inflamação | 160 °F |
| os valores de pKa | 9.29(at 25℃) |
| Condições de armazenamento | Room temperature |
3-Fluorophenol is used to synthesize chemical intermediates such as liquid crystal materials, pharmaceuticals, antibacterial agents, insecticides, etc. It can be obtained by reacting meta aminophenol with anhydrous hydrofluoric acid to remove the amino group and replace an amino group with a fluorine atom.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:626-02-8
Molecular Formula:C6H5IO
Molecular Weight:220.01
EINECS:210-923-2
Synonyms:M-IODOPHENOL; PHENOL, 3-IODO-; 3-iodo-pheno; 3-Jodphenol; m-Hydroxyiodobenzene; m-iodo-pheno; Phenol, m-iodo-; 3-IODOPHENOL; META-IODOPHENOL; m-Iodophenol 3-Iodophenol; 3-Iodophenol,98%
3-Iodophenol appears as a white or off white solid at room temperature and pressure, with a certain degree of corrosiveness. Contact with it can cause local protein denaturation. Its solution can be washed with alcohol when it comes into contact with the skin. It has a special odor of phenol, good solubility in ethyl acetate and chloroform, and slightly soluble in water.
| Item | Especificação |
| Ponto de ebulição | 190 °C / 100mmHg |
| Densidade | 1.8665 (estimate) |
| Ponto de fusão | 42-44 °C (lit.) |
| ponto de inflamação | >230 °F |
| os valores de pKa | 9.03(at 25℃) |
| Condições de armazenamento | 2-8°C |
3-Iodophenol, as an organic synthesis and medicinal chemical intermediate, is commonly used in the preparation of biological hormones. In the synthesis and transformation, it mainly revolves around the iodine unit in its structure. Iodine atoms can be connected to alkynes, aryl groups, alkyl groups, etc. through coupling reactions. In addition, phenolic hydroxyl groups are prone to undergo alkylation reactions under alkaline conditions due to their acidity, resulting in ether compounds.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:533-58-4
Molecular Formula:C6H5IO
Molecular Weight:220.01
EINECS:208-569-9
Synonyms:2-iodo-pheno; 2-Jodfenol; o-iodo-pheno; o-Jodfenol; Phenol, o-iodo-; PHENOL, 2-IODO-; O-IODOPHENOL; ORTHO-IODOPHENOL; o-iodophenic acid; 1-Hydroxy-2-iodobenzene; 2-Iodophenol, 98% 5GR; o-Iodophenol 2-Iodophenol; 2-Iodophenol,98%; NSC 9245; 2-lodophenol; 2-Iodophenol>; 533-58-4 2-Iodophenol; DK807
2-Iodophenol is an important organic diol, which is a halogenated phenol with colorless needle shaped crystals. Slightly soluble in water, easily soluble in organic solvents such as ethanol and ether.
| Item | Especificação |
| Ponto de ebulição | 186-187 °C/160 mmHg (lit.) |
| Densidade | 1.947 g/mL at 25 °C (lit.) |
| Ponto de fusão | 37-40 °C (lit.) |
| ponto de inflamação | >230 °F |
| os valores de pKa | 8.51(at 25℃) |
| Condições de armazenamento | Manter em local escuro |
2-Iodophenol is an important organic diol and a widely used organic raw material. It is a fundamental raw material in the organic synthesis industry; It can also be used for the production of lubricants and plasticizers.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:873-62-1
Molecular Formula:C7H5NO
Peso Molecular:119.12
EINECS:212-845-4
Synonyms:M-HYDROXYBENZONITRILE; M-CYANOPHENOL; AKOS B004111; 3-HYDROXYBENZONITRILE; 3-CYANOPHENOL; 3-Hydroxybenzoic acid nitrile; 3-Cyanophenol ,99%; 3-Cyanophenol m-Cyanophenol m-Chlorobenzonitrile; 3-CYANOPHENOL (3-HYDROXYBENZONITRILE)
3-Cyanophenol is almost white to light brown and can be prepared from 3-cyanophenylboronic acid or 3-hydroxybenzoic acid as raw materials.
| Item | Especificação |
| Ponto de ebulição | 222.38°C (estimativa) |
| Densidade | 1.1871 (rough estimate) |
| Ponto de fusão | 78-81 °C(lit.) |
| resistividade | 1.5800 (estimativa) |
| Condições de armazenamento | Atmosfera inerte,em Temperatura ambiente |
3-Cyanophenol is an organic intermediate
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
1-(2-Hydroxyethyl)piperazine CAS 103-76-4
CAS:103-76-4
Molecular Formula:C6H14N2O
Molecular Weight:130.19
EINECS:203-142-3
Synonyms:1-(2-Hydroxyethyl)piperazine (HEP) CAS No 103-76-4; 2-PIPERAZINOETHANOL; 2-PIPERAZINBETHANOL; 2-PIPERAZIN-1-YL-ETHANOL; 2-HYDROXYETHYLPIPERAZINE; 2-(1-PIPERAZINYL)ETHANOL; 2-(1-PIPERAZYL)ETHANOL; 1-PIPERAZINEETHANOL; 1-(2-HYDROXYETHYL)PIPERAZINE; 1-(2-HYDROXYETHYL)PIPERIZINE
1- (2-Hydroxyethyl) piperazine is an important chemical product widely used in surfactants, electronic chemicals, and desulfurization and decarbonization detergents., The boiling point of this product is 246 ℃, the relative density is 1.061, and the refractive index is 1.5065.
| Item | Especificação |
| Ponto de ebulição | 246 °C(lit.) |
| Densidade | 1.061 g/mL at 25 °C(lit.) |
| Ponto de fusão | -38.5 °C |
| resistividade | n20/D 1.506(lit.) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
1- (2-Hydroxyethyl) piperazine is an important intermediate for the production of triethylenediamine, surfactants, pharmaceuticals, pesticides, and can be used for the synthesis of psychiatric drugs such as fluphenazine
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Methyl 3-aminocrotonate CAS 14205-39-1
CAS:14205-39-1
Molecular Formula:C5H9NO2
Molecular Weight:115.13
EINECS:238-056-5
Synonyms:METHYL-BETA-AMINOCROTONATE; METHYL 4-AMINOCROTONATE; METHYL 3-AMINOCROTONATE; METHYL 3-AMINO-2-BUTENOATE; AMINOCROTONIC ACID METHYL ESTER; 3-AMINOCROTONATE METHYL ESTER; 3-AMINOCROTONIC ACID METHYL ESTER; 3-AMINO-2-BUTENOIC ACID METHYL ESTER; 3-amino-2-butenoicacimethylester
Methyl 3-aminocrotonate is a light yellow solid at room temperature and pressure, with certain hygroscopicity. The molecular structure of 3-aminocrotonate methyl ester contains an enamine structure, which has high chemical reactivity
| Item | Especificação |
| Ponto de ebulição | 112°C 42mm |
| Densidade | 1.1808 (rough estimate) |
| Ponto de fusão | 81-83 °C(lit.) |
| resistividade | 1.4538 (estimate) |
| Condições de armazenamento | Manter em lugar escuro,atmosfera Inerte,2-8°C |
Methyl-3-aminocrotonate is commonly used as an intermediate in organic synthesis and medicinal chemistry, and is often used for structural modification of drug molecules
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
3-Nitrobenzaldehyde CAS 99-61-6
CAS:99-61-6
Molecular Formula:C7H5NO3
Molecular Weight:151.12
EINECS:202-772-6
Synonyms:3-NITROBENZALDEHYDE FOR SYNTHESIS; 3-Nitrobenzaldehyde ReagentPlus(R), 99%; 3-FORMYLNITROBENZENE; 3-NITROBENZALDEHYDE; AKOS BBS-00003197; 3-mononitrobenzaldehyde; m-Nitrobenzaldehyde(3-Nitrobenzaldehyde); META NITRO BENZALDEHYDE; 3-NITROBENZALDEHYDE 99-61-6
3-Nitrobenzaldehyde hydrate is a yellow crystalline solid, with needle like precipitates from water. It has a melting point of 58-59 ℃, a boiling point of 164 ℃ (3.06kPa), and a relative density of 1.2792 (20/4 ℃). Soluble in alcohols, ethers, chloroform, benzene, and acetone, almost insoluble in water. Capable of conducting steam distillation. M-nitrobenzaldehyde is a benzaldehyde with a nitro group in the meta position.
| Item | Especificação |
| Ponto de ebulição | 285-290 °C |
| Densidade | 1.2792 |
| Ponto de fusão | 56 °C |
| resistividade | 1.5800 (estimativa) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
3-Nitrobenzaldehyde is an intermediate used in the synthesis of organic compounds such as pharmaceuticals, dyes, and surfactants. In the pharmaceutical industry, it is used for the synthesis of calcium iodoprolol, iodoprolol, meta hydroxylamine bitartrate, nimodipine, nicardipine, nitrendipine, nirudipine, etc.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:4618-18-2
Molecular Formula:C12H22O11
Molecular Weight:342.3
EINECS:225-027-7
Synonyms:4-0-beta-d-galactopyranosyl-d-fructose; 4-o-beta-d-galactopyranosyl-d-fructos; 4-o-beta-d-galattopiranosil-d-fruttofuranosio; 4-O-D-Galactopyranosyl-D-fructose; 4-O-β-D-Galactopyranosyl-D-fructose, 4-O-β-D-Galactopyranosyl-D-fructofuranose; lactutose syrup; Caloryl; Lagnos; Lactulose for peak identification; 4-O-hexopyranosylhex-2-ulofuranose; ruguotang
Lactulose is a light yellow transparent viscous liquid (with a content of over 50%), with a cool and sweet taste, and a sweetness level of 48% to 62% of sucrose. Combined with sucrose, the sweetness can be increased. Relative density 1.35, refractive index 1.47. Soluble in water, with a solubility of 70% in water at 25 ℃.
| Item | Especificação |
| Ponto de ebulição | 397.76°C (rough estimate) |
| Densidade | 1,32g/cm |
| Ponto de fusão | ~169 °C (dec.) |
| os valores de pKa | 11.67±0.20(Predicted) |
| resistividade | 1,45-1,47 |
| Condições de armazenamento | Geladeira |
Lactulose oral solution has the effects of reducing blood ammonia and relieving diarrhea. It is not only suitable for treating habitual constipation, but also for the treatment of ammonia induced hepatic coma and hyperammonemia. Used as an indirect nutritional supplement in industry. According to the regulations of GB 2760-86 in China, it can be added to fresh milk and beverages.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:9000-65-1
Fórmula Molecular:NULL
Molecular Weight:840000
EINECS:232-552-5
Synonyms:Gum tragacanth power; TRAGACANTH GUM (ASTRAGALUS SPP.); Astragalus gum; Tragant gum; GUM TRAGACANTH; GUM SHIRAZ; FEMA 3079; SHIRAZ GUM; TRAGACANTH; TRAGACANTH GUM; Gum tragacanth powder
Tragacanth gum is white to light yellow in color. Odorless, odorless, and with a smooth and sticky taste. Huangqi gum is used in industrial applications as a thickener, emulsifier, suspension agent, water holding agent, and film-forming agent; Huangqi gum can be used as a milk stabilizer in acidic oil-water systems in food,
| Item | Especificação |
| Odor | sem sabor |
| Pureza | 99.9% |
| MW | 840000 |
| MF | NULL |
Tragacanth gum industrial applications: used as a thickener, emulsifier, suspension agent, water holding agent, and film-forming agent.Pharmaceutical – Used as an emulsifying stabilizer for cod liver oil, orange juice cod liver oil, mineral oil, fat soluble vitamins, etc.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:553-26-4
Molecular Formula:C10H8N2
Molecular Weight:156.18
EINECS:209-036-3
Synonyms:GAMMA,GAMMA-DIPYRIDYL; 4, 4′-DIPYRIDINE; 4,4′-DIPYRIDYL; 4,4-DIPYRIDYL; 4,4′-BIPYRIDINE; 4,4-BIPYRIDINE; 4,4′-BIPYRIDYL; 4,4′-BIPYRIDYL HYDRATE; 4,4,4′-DIPYRIDYL; 4-PYRIDIN-4-YLPYRIDINE; 4-(4-Pyridyl)pyridine; 4,4’-Bipyridine,dihydrate
4,4 ‘- Bipyridine is a colorless crystal. Melting point 111.0-112.0 ℃. Easy to dissolve in ethanol and ether, insoluble in water. But soluble in most organic solvents. It is a commonly used intermediate in organic synthesis and medicinal chemistry, with extensive applications in drug molecule synthesis and basic chemical research.
| Item | Especificação |
| Ponto de fusão | 109-112 °C(lit.) |
| Pureza | 99.5% |
| MW | 156.18 |
| MF | C10H8N2 |
| Condições de armazenamento | Conservar abaixo de +30°C. |
4,4 ‘- Bipyridine is widely used in organic synthesis, pharmaceutical intermediates, and in drug molecule synthesis and basic chemical research.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
Iron(III) citrate CAS 3522-50-7
CAS:3522-50-7
Molecular Formula:C6H8FeO7
Molecular Weight:247.97
EINECS:222-536-6
Synonyms:IRON (III) CITRATE, GREEN; IRON CITRATE; FERRIC CITRATE; FERRIC CITRATE, TECHNICAL GRADE; CitricAcid,FerricSalt; Iron(III)citrate,Fecontent24-26%; Ferric citrate cell culture tested; Iron(Ⅲ) citrate; EFRRIC CITRATE; FERROUS CITRATE、FERRIC CITRATE; iron(III) 2-hydroxypropane-1,2,3-tricarboxylate; Iron(III) citrate technical grade
Iron (III) citrate is a reddish brown transparent thin film crystal or crystalline powder. Used in the pharmaceutical industry and the preparation of ammonium citrate, as well as in the preparation of improved Nish medium for haploid breeding.
| Item | Especificação |
| Ponto de fusão | >300°C |
| Pureza | 99% |
| MW | 247.97 |
| MF | C6H8FeO7 |
| Condições de armazenamento | temperatura de quarto |
Iron citrate is used in medicine for hemodialysis and regulating iron levels in patients with chronic kidney disease. It acts on phosphates present in the diet and forms insoluble compounds, thereby reducing their absorption by the digestive system.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:8001-22-7
Fórmula Molecular:NULL
Peso Molecular:0
EINECS:232-274-4
Synonyms:SOYBEANCOOKINGOIL; LOW-SATURATEDFATTYACIDSOYBEANOIL; NONHYDROGENATEDSOYBEANCOOKINGOIL; CLINOLEIC; LOW-ALPHA-LINOLENICACIDSOYBEANOIL; SOYA-BEAN-FAT; PFLANZENOEL (SOJA); SOYASAPONIN; SOYBEAN OIL USP FOOD GRADE; Oil Of Soybean
Soybean oil is a light amber colored oil that remains liquid at temperatures as low as 2-4 ℃ and should be free of foreign substances at 21-27 ℃. Soybean oil is mainly used for food and is also used to manufacture hardened oil, soap, glycerin, and paint
| Item | Especificação |
| Ponto de inflamação | >230 °F |
| Densidade | 0.917 g/mL at 25 °C(lit.) |
| proporção | 0.920 (25/25℃) |
| resistividade | n20/D 1.4743(lit.) |
| Condições de armazenamento | 2-8°C |
Soybean oil is mainly used for food and is also used to make hardened oil, soap, glycerin, and paint. It is used for leather fatliquoring and has a strong bond with leather, making it less likely to precipitate. Prepare sulfated oil. Coating agent; Emulsifier; Forming additives; Organizational improver.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:35554-44-0
Molecular Formula:C14H14Cl2N2O
Molecular Weight:297.18
EINECS:252-615-0
Synonyms:1-(BETA-ALLYLOXY-2,4-DICHLOROPHENYLETHYL) IMIDAZOLE; 1-[2-(2,4-dichloro-phenyl)-2-(2-propenyloxy)ethyl]-1h-imidazole; DECCOZIL(R); CHLORAMIZOL; CHLORAMIZOL(R); IMAZALIL; FRESHGARD(R); FECUNDAL(R); FLORASAN(R); FLO-PRO; FLO-PRO(R); FUNGAZIL; FUNGAZIL(R); FUNGAFLOR
Imazalil is a yellow to brown crystal with a relative density of 1.2429 (23 ℃), a refractive index of n20D1.5643, and a vapor pressure of 9.33 × 10-6. It is easily soluble in organic solvents such as ethanol, methanol, benzene, xylene, n-heptane, hexane, and petroleum ether, and slightly soluble in water
| Item | Especificação |
| Ponto de ebulição | >340°C |
| Densidade | 1.348 |
| Ponto de fusão | 52.7°C |
| os valores de pKa | 6.53 (weak base) |
| resistividade | 1.5680 (estimativa) |
| Condições de armazenamento | 2-8°C |
Imazalil is an systemic fungicide with a broad spectrum of antibacterial properties, effective in preventing many fungal diseases that invade fruits, grains, vegetables, and ornamental plants. Especially citrus, banana, and other fruits can be sprayed and soaked to prevent and control post harvest rot, which is highly effective against species such as Colletotrichum, Fusarium, Colletotrichum, and drupe brown rust, as well as against strains of Penicillium that are resistant to carbendazim.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:61-73-4
Molecular Formula:C16H18ClN3S
Molecular Weight:319.85
EINECS:200-515-2
Synonyms:Methylene Blue solution alkaline according to Loeffler; Basovict Methylene Blue;Conbasic Blue N; Duasyn Basic Blue IAD01; Dycosbasic Methylene Blue BB; Methylene Blue FZ; Ravi Methylene Blue Z.F.; Chromosmon; Hidaco methylene blue salt free; Leather pure blue hb
Methylene Blue, also known as methylene blue, methylene blue, or methylene blue, is a reducing agent based on methylene blue (MB). It is soluble in water, easily penetrates cell membranes, and has relatively no toxic side effects. It is an approved clinical medication.
| Item | Especificação |
| λmax | 661 nm |
| Densidade | 1,0 g/mL a 20 °C |
| Ponto de fusão | 190 °C (dec.)(lit.) |
| Condições de armazenamento | temperatura de quarto |
| Pureza | 98% |
| os valores de pKa | 2.6, 11.2(at 25℃) |
Methylene Blue is mainly used for dyeing cotton, acrylic, linen, and silk, with poor fastness and a sun fastness of 2-3 levels. It is also used for paper dyeing, bamboo and wood coloring, as well as manufacturing ink and color lakes. It can also be used for dyeing biological bacterial tissues.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
o-Cresolphthalein Complexone CAS 2411-89-4
CAS:2411-89-4
Molecular Formula:C32H32N2O12
Molecular Weight:636.61
EINECS:219-318-8
Synonyms:XYLENOLPHTHALEIN-BIS(MINODIACETIC ACID); XYLENYLPHTHALEIN-BISIMINODIACETIC ACID; PHTHALEIN PURPLE; PHTHALEIN COMPLEXON; PHTHALEIN COMPLEXONE; Cresolphtha; o-Cresolphthalein complexone p.a.; o-Cresolphthalein Co; Metalphthalein, n-hydrate
O-Cresolphthalein Complexone, also known as o-toluene phenolphthalein (C22H18O4mol346.38), is a white or yellow powder that is easily soluble in ethanol and ether; Insoluble in water, soluble in dilute alkali, blue in color, pH 8.2-9.8 (color ranges from colorless to red); The maximum absorption peak is 566 (381) mm.
| Item | Especificação |
| λmax | 575nm, 377nm |
| Densidade | 1.515±0.06 g/cm3(Predicted) |
| Ponto de fusão | 181-185 °C (dec.)(lit.) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
| Pureza | 98%pKa |
| os valores de pKa | 1.47, 8.24(at 25℃) |
O-Cresolphthalain Complexone is an indicator for complexometric titration of magnesium, calcium, strontium, barium, and SO42-; Reagent for determining serum calcium, chelating ion chromatography ligand for trace metal ions
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS:1306-38-3
Molecular Formula:CeO2
Molecular Weight:172.1148
EINECS:215-150-4
Synonyms:Cerium dioxide; Cerium(IV) oxide; Cerium(IV) oxide, NanoTek CE-6080, 20% in H2O, colloidal dispersion in water with dispersant; Cerium(IV) oxide, NanoTek CE-6082, 18% in H2O, colloidal dispersion with dispersant; Cerium(IV) oxide, NanoTek CE-6042, 18% in H2O, colloidal dispersion
Cerium dioxide light yellow white cubic powder. Relative density is 7.132. Melting point 2600 ℃. Insoluble in water and not easily soluble in inorganic acids. Reducing agents (such as hydroxylamine reducing agents) need to be added to assist in dissolution. It is easy to penetrate visible light, but has good absorption of ultraviolet light, while also making the skin look more natural.
| Item | Especificação |
| resistividade | 10*10 (ρ/μΩ.cm) |
| Densidade | 7.13 g/mL at 25 °C(lit.) |
| Ponto de fusão | 2600°C |
| Condições de armazenamento | Storage temperature: no restrictions. |
| Pureza | 99.999% |
Cerium dioxide is used as an additive in the glass industry and as a grinding material for glass plates. It has been expanded to grind eyeglass glass, optical lenses, and cathode ray tubes, and has functions such as decolorization, clarification, absorption of ultraviolet and electron rays in glass. Also used as an anti reflective agent for eyeglass lenses, cerium titanium yellow is made with cerium to give the glass a light yellow color. Used as an impregnating agent for piezoelectric ceramics in ceramic glazes and the electronics industry. It is also used to manufacture highly active catalysts, incandescent covers for gas lamps, and fluorescent screens for X-rays.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
(4S,5R)-3-tert-butoxycarbony-2-(4-anisy)-4-phenyl-5-oxazolidinecarboxylic acid CAS 196404-55-4
CAS:196404-55-4
Molecular Formula:C22H25NO6
Peso Molecular:399.44
EINECS:1592732-453-0
Synonyms:(4S,5R)-2-(4-Methoxyphenyl)-4-phenyl-3,5-oxazolidinedicarboxylic acid 3-tert-butyl ester; (4S,5R)-3-tert-Butoxycarbony-2-(4-anisyl)-4-phenyl-5-oxazolidinecarboxylic acid; (4S,5R)-2-(4-Methoxy-phenyl)-3-N-Boc-4-phenyl-3,5-oxazolidine carboxylic acid; (4S,5R)-2-(4-Methoxyphenyl)-N-t-boc-4-phenyl-oxazolidine-5-carboxylic acid
(4S, 5R) -3-tert-butoxycarbony-2- (4-anisy) -4-phenyl-5-oxazolidinecarbolic acid is a white crystalline powder that is soluble in organic solvents such as methanol, ethanol, DMSO, and is derived from the Chinese yew tree.
| Item | Especificação |
| Ponto de ebulição | 573.8±50.0 °C(Predicted) |
| Densidade | 1.238 |
| Ponto de fusão | 134-138℃ |
| os valores de pKa | 2.99±0.60(Predicted) |
| Pureza | 99% |
(4S, 5R) -3-tert-butoxycarbony-2- (4-anisy) -4-phenyl-5-oxazolidinecarbolic is an organic synthesis intermediate and pharmaceutical intermediate, which can be used in laboratory research and development processes and chemical pharmaceutical synthesis processes. It is mainly used as a synthetic intermediate for docetaxel.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
N,N-Dimethylacetamide CAS 127-19-5
CAS:127-19-5
Molecular Formula:C4H9NO
Peso Molecular:87.12
EINECS:204-826-4
Synonyms:N,N-DIMETHYLACETAMIDE, FOR HPLC; N,N-DIMETHYLACETAMIDE, FOR UV-SPECTROSCOPY; N N-DIMETHYLACETAMIDE DIST. 5 L; N,N-DIMETHYLACETAMIDE, FOR PEPTIDE; N,N-DIMETHYLACETAMIDE extrapure AR; PROPYLENE CHLORIDE; Acetyldimeethylamine; CBC 510337; CH3CON(CH3)2; dimethylacetamid; N-Acetyldimethylamine DMA; N,N-dimethylacetamide B&J brand 4 L
N,N-Dimethylacetamide, also known as Acetyldimethylamine or Acetyldimethylamine, abbreviated as DMAC, is a non proton highly polar solvent with a slight ammonia odor and strong solubility. It can dissolve a wide range of substances, including water, aromatic compounds, esters, ketones, alcohols, ethers, benzene, and trichloromethane, and can activate compound molecules. Therefore, it is widely used as a solvent and catalyst.
| Item | Especificação |
| Ponto de ebulição | 164.5-166 °C (lit.) |
| Densidade | 0.937 g/mL at 25 °C (lit.) |
| Ponto de fusão | -20 °C (lit.) |
| ponto de inflamação | 158 °F |
| resistividade | n20/D 1.439(lit.) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
N,N-Dimethylacetamide is used as a raw material for synthetic fibers and an excellent polar solvent for organic synthesis. N, N-Dimethylacetamide is used in organic synthesis, as well as as as a solvent, catalyst, and paint remover. N, N-Dimethylacetamide is used as a reaction solvent for drug synthesis, a solvent for synthetic fiber spinning and resin synthesis, a solvent for photosensitive chemical colorants, and a solvent for coatings. catalyzer.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
5-Norbornene-2-ácido carboxílico CAS 120-74-1
CAS: 120-74-1
Fórmula Molecular:C8H10O2
Peso Molecular:138.16
EINECS:204-422-8
Sinónimos:5-Norbornene-2-carboxílico; 5-Norbornene-2-carboxylicaci; 5-Hyboratene-2-ácido fórmico; 5-Norbornene-2-ácido carboxílico (7CI, 8CI); BICICLO[2.2.1]-5-HEPTENE-2-ÁCIDO CARBOXÍLICO; BICICLO[2.2.1]HEPT-5-ENE-2-ÁCIDO CARBOXÍLICO; 5-norbornene-2-ácido carboxílico, mistura de E; 5-norbornene-2-ácido carboxílico, mistura de endo e exo; 5-norbornene-2-ácido carboxílico, predominantemente endo
5-Norbornene-2-ácido carboxílico é uma substância química que aparece como um pó branco e pode ser usado nas áreas de síntese orgânica e química do metal.
| Item | Especificação |
| Ponto de ebulição | 136-138 °C14 mm Hg(lit.) |
| Densidade | 1.129 g/mL a 25 °C(lit.) |
| ponto de inflamação | >230 °F |
| resistividade | n20/D 1.494(lit.) |
| os valores de pKa | 4.63±0.20(Previsto) |
| Sabor | frutado |
5-Norbornene-2-ácido carboxílico é usado como uma investigação composto. Ele tem demonstrado extenso potencial de aplicação e perspectivas de desenvolvimento em vários campos, tais como a síntese química, metal-orgânicos, a química, a medicina e a biologia.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
1,4-Bis(3-aminopropil)piperazina CAS 7209-38-3
CAS: 7209-38-3
Fórmula Molecular:C10H24N4
Peso Molecular:200.32
EINECS:230-589-1
Sinónimos:1,4-DI(3-AMINOPROPIL)PIPERAZINA; 1,4-BIS(3-AMINOPROPIL)PIPERAZINA; 1,4-BIS(AMINOPROPIL) PIPERAZINA; 1,4-PIPERAZINEBIS(PROPILAMINA); BIS AMINOPROPIL PIPIRAZINE; BAPPRZ; 1,4-Bis-(3-aminoprop-1-il) - piperazina; 3,3'-(Piperazina-1,4-diil)dipropan-1-amina; 1,4-BIS(3-AMINIPROPYL) PIPERAZINA
1,4-Bis (3-aminopropil) piperazina aparece como um pó branco e é um intermediário químico
| Item | Especificação |
| Ponto de ebulição | 150-152 °C2 mm Hg(lit.) |
| Densidade | 0.973 g/mL a 25 °C(lit.) |
| ponto de inflamação | 325 °F |
| resistividade | n20/D 1.502 os(lit.) |
| os valores de pKa | 10.69±0.10(Previsto) |
| PH | 11.7 em 20℃ e 1mg/L |
1,4-Bis (3-aminopropil) piperazina é usado para functionalization of natural montmorilonite (M) e sintético de canamicina (K) 1.'
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
TRIS(2-CLOROETIL) FOSFITO DE CAS 140-08-9
CAS: 140-08-9
Fórmula Molecular:C6H12Cl3O3P
Peso Molecular:269.49
EINECS:205-397-6
Sinónimos:FÓSFORO ÁCIDO TRIS(2-CLOROETIL); ÉSTER TRI-2-CLOROETIL FOSFITO; TRIS(2-CLOROETIL) FOSFITO; AURORA KA-1232; 2-CHLOROETHANOL FOSFITO; CRE-1; Fósforo ácido tris(2-cloroetil); Tris(2-chloroethoxy)fosfina; ANTI-COL12(N-TERMINAL) anticorpo produzido em coelho; COLEC12
TRIS (2-CLOROETIL) FOSFITO é um líquido oleoso incolor, com um intervalo de temperatura de 112.º a 115.º ℃/266 Pa, n50D de 1.4870, densidade relativa de 1.3280, e um intervalo de temperatura de 90 ℃.
| Item | Especificação |
| Ponto de ebulição | 112.º a 115.º °C2 mm Hg(lit.) |
| Densidade | 1.328 g/mL a 25 °C(lit.) |
| ponto de inflamação | 375 °F |
| resistividade | n20/D 1.487(lit.) |
| Condições de armazenamento | -20°C |
TRIS (2-CLOROETIL) FOSFITO é um intermediário da planta regulador de crescimento ethephon.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS: 101418-00-2
Fórmula Molecular:C23H24O12S3
Peso Molecular:588.62
EINECS:NA
Sinónimos:Policresulen 2-Hidroxi-3,5-bis[(4-hidroxi-2-metil-5-sulfo-fenil)metil]-4-metil-benzenossulfónico; 2-HIDROXI-3,5-BIS[(4-HIDROXI-2-; METIL-5-SULFO-FENIL)METIL]-4-METIL-benzenossulfónico; POLICRESULEN(ALBOTHYL); PolicresulenC15H16O8S2; Benzenesulfonic acid, 2-hidroxi-4-metil-polímero com formaldeído Negatan
Policesculen é um novo medicamento utilizado para tratar a erosão cervical, que é não-tóxico, não alergênico e resistente a drogas. Ele tem selectividade para necrótico ou tecido doente, pode causar a coagulação e o derramamento do tecido doente, e pode também causar local de congestionamento, estimular a proliferação de tecido de granulação, acelerar epidérmica cobertura, mas não danificar o tecido normal.
| Item | Especificação |
| MW | 588.62 |
| Cor | Marrom a cor de Laranja |
| Pureza | 50%,36% |
| Condições de armazenamento | Selado em seco,Temperatura de Quarto |
Policesculen é utilizado para o tratamento local de feridas na pele e lesões (como queimaduras, membro úlceras, úlceras, inflamação crônica), que pode acelerar o derramamento de tecido necrótico, parar o sangramento e promover o processo de cicatrização.Otorrinolaringologia: Utilizado para tratar a inflamação da mucosa oral e das gengivas, úlceras orais e hemostasia após amigdalectomia.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
CAS: 110-13-4
Fórmula Molecular:C6H10O2
Peso Molecular:114.14
EINECS:203-738-3
Sinónimos:Hexano-2,5-diona; Hexanodiona-(2,5); 1,2-DIACETYLETHANE; 2,5-HEXANODIONA; 2,5-HEXANDIONE; ACETONYLACETONE; AKOS BBS-00004255; HEXANODIONA, 2,5-(SG); Acetonylacetone, 97% 250ML; Acetonylacetone, 97% 5ML; 2,5-HEXANODIONA PARA SÍNTESE; Hexanodiona; 4-Acetylbutan-2-ona, 2,5-Dioxohexane
2,5-Hexanodiona líquido incolor. Ponto de fusão -5.5 ℃, o ponto de ebulição 194 ℃ (100.5 kPa), 89 ℃ (3.33 kPa), densidade relativa 0.9737 (20/4 ° c), índice de refração 1.4421. Pode ser miscível com água, etanol e éter. Ao longo do tempo, gradualmente, torna-se amarela.
| Item | Especificação |
| Ponto de ebulição | 191 °C (lit.) |
| Densidade | 0.973 g/mL a 25 °C (lit.) |
| Ponto de fusão | -6–5 °C (lit.) |
| o limite de explosão | De 1,5%(V) |
| PH | 6.1 (10g/l, H2O, 20℃) |
| Condições de armazenamento | Conservar abaixo de +30°C. |
2,5-Hexanodiona é usado como um alto ponto de ebulição do solvente para resinas sintéticas, nitro spray de tinta, corantes, tintas de impressão, curtumes, os agentes de vulcanização de borracha aceleradores, bem como inseticidas, medicamentos de matérias-primas.
Geralmente embalados em 25 kg/tambor,e também pode ser fazer o pacote personalizado.
PT 
EN 
ZH 
DE 
ES 
KO 
FR 
TH 
AR 
IT 
VI 
NL 
RU 
