Ethyl Cellulose is a cellulose derivative with a CAS number of 9004-57-3. It is referred to as “EC”. It also has other names such as cellulose ethyl ether and cellulose ethyl ether. By subjecting cellulose to specific chemical modifications, it has a unique chemical structure and properties.

Ethyl cellulose CAS 9004-57-3 generally appears as white granules or fine powder, and is an odorless white or light gray flowing powder. In terms of physical and chemical properties, it has many characteristics. Its density is 1.45g/mL at 20℃, its relative vapor density (compared with air, air = 1) is between 1.07 – 1.18g/mL, and its refractive index is 1.47. Its melting point is in the range of 240 – 255℃, and its vapor pressure is 0.0±2.0 mmHg at 25℃. In terms of solubility, ethyl cellulose can be dissolved in most organic solvents, such as ethyl acetate, butyl acetate, benzene, toluene, xylene, acetone, methanol, ethanol, butanol, 1,2-dichloroethane, carbon tetrachloride, etc., and can be mixed with resins, oil waxes and plasticizers. It has no effect on alkali and dilute acid, but it is insoluble in water.

Uses of ethyl cellulose

Pharmazeutischen Bereich

Ethyl cellulose CAS 9004-57-3 plays a vital role in the pharmaceutical field and is a commonly used pharmaceutical excipient. It can be used as a coating agent to put a layer of “protective clothing” on the drug. For example, after wrapping some drugs that are sensitive to gastric acid with a film made of ethyl cellulose, it can pass through the stomach smoothly and reach the intestine for release, avoiding the drug from being destroyed by gastric acid in the stomach, and improving the effectiveness and stability of the drug. At the same time, it can also act as a flavoring agent to improve the taste of the drug and make it easier for patients to accept. In tablet production, ethyl cellulose can also be used as a filler to give the tablet a suitable shape and volume, which is convenient for production and processing and patient administration.

Industriellen Bereich

In the coating industry, it is often used as a thickener, adhesive, and film-forming agent. It can be used in the preparation of various coatings such as metal, paper, and rubber. It can make the coating have better adhesion, rheology, and other characteristics, making the coating more uniform, firm, and beautiful.

In electronic paste, it can be used as an organic carrier to prepare electronic paste, providing key material support for the production of electronic components.

In the field of adhesives, it can play a bonding role, allowing different materials to be better bonded together. It is also a member of the advanced insulating materials in the radio industry, used for cable insulation, PCB coating, integrated circuit packaging, etc., to ensure the safe and stable operation of electronic equipment.

Unilong is a professional Ethyl cellulose CAS 9004-57-3 manufacturer, we can provide a variety of product specifications of Organische Chemie, quality assurance, fast delivery, have in stock.

Glyoxylic Acid CAS 298-12-4 is a hair straightener widely used in styling cosmetics. It came as an excellent alternative to formaldehyde which causes severe damage to human health. Glyoxylic Acid CAS 298-12-4 is not only safer but also more effective. It also works as an anti-static and softening agent. In its raw form, it appears as a transparent liquid that is colorless to light yellow with an obnoxious odor. The chemical formula of Glyoxylic Acid is C2H2O3 and is also known as Oxoacetic acid.

It helps to break and reform disulfide bonds in hair, reducing frizz and curliness, resulting in smoother, shinier hair. Its milder action compared to traditional keratin treatments makes it a popular choice.

Hautpflege : In skincare, Glyoxylic Acid functions as an exfoliant and a skin-brightening agent.

Glyoxylic Acid is a highly beneficial ingredient in the world of cosmetics.

Hair care : Glyoxylic Acid is used in hair treatments, particularly in hair straightening and smoothing products. It helps to break and reform disulfide bonds in hair, reducing frizz and curliness, resulting in smoother, shinier hair. Its milder action compared to traditional keratin treatments makes it a popular choice

Hautpflege : In skincare, Glyoxylic Acid functions as an exfoliant and a skin-brightening agent. It helps remove dead skin cells, promoting cell turnover and improving skin texture. Additionally, it can reduce hyperpigmentation and even out skin tone, contributing to a more radiant and youthful appearance

Hair styling ingredient with semi-permanent hair straightening & hair conditioning effect. The carboxylic and aldehyde groups of glyoxylic acid react with the amine groups present in hair keratin resulting in the formation of stable bonds.

In particular, glyoxylic acid produces semi-permanent hair straightening without breaking the cystine disulfide bridge. It provides long lasting relaxing effect of hair fibres, without causing damage to the hair and scalp irritations typical of alkaline chemical and other straightening agents.

Glyoxylsäure from UNILONG is high purity cosmetic grade without glyoxal and without formaldehyde.

Glyoxylic acid finds use in hair straightening formulations to smooth wavy & tightly curly hair. When applied with flat iron it softens natural curls providing shiny silk appearance and improving hair maneageability.

Glyoxylic acid (GA) is widely used as a straight perming agent for hair care products; it penetrates deeply to repair, nourish, and reshape the hair shaft, allowing an intense and long-lasting smoothing action. Its molecules are activated by heat and create a protective net around the hair, keeping it smooth for up to 3 months from the date of application of treatment.

Unilong is a professional Glyoxylic acid manufacturer, we can provide a variety of product specifications of Organische Chemie, quality assurance, fast delivery, have in stock.

PLGA is copolymerized by lactic acid (LA) and glycolic acid (GA), which can make full use of the advantages of PLA and PGA and make up for their respective shortcomings. The obtained PLGA has good degradability, biocompatibility and outstanding mechanical properties, heat resistance, and degradation controllability, making it the first batch of degradable medical polymer materials certified by (FDA), and is widely used in drug controlled release, medical fiber materials, bone tissue engineering scaffolds and other fields.

PLGA is usually a white solid with a glass transition temperature between 40 and 60 °C. It is in a glassy state at room temperature. The molecular chain shows strong rigidity and is generally an amorphous or semi-crystalline polymer.

The degradation performance of PLGA mainly depends on the copolymer monomer ratio, crystallinity, relative molecular mass, pH value, heat treatment conditions and mechanical load.

Since the GA unit is more hydrophilic than the LA unit, the higher the GA content in the copolymer, the faster the degradation rate. Gentile. summarized the degradation cycle of PLGA with different copolymer monomer ratios. As shown in Table 1, it can be seen that the degradation cycle of PLGA increases exponentially with the increase of LA content. When LA∶GA=50∶50, the degradation rate is the fastest, which is nearly 10 times faster than pure PLA.

What Ichs PLGA CAS 26780-50-7 Used For?

PLGA has become one of the most widely used degradable medical polymer materials due to its good biocompatibility, degradability and mechanical properties. In practical applications, by controlling the synthesis method and aggregate structure, the degradation rate of PLGA can be effectively regulated to obtain PLGA products that meet the actual application needs, so that it has a broader application prospect in the fields of drug controlled release, medical surgical sutures, bone tissue engineering scaffolds, etc.

‌Dipropyleneglycol Dimethyl Ether (DMM or DME)  is a multi-purpose environmentally friendly solvent with a weak ether odor, moderate evaporation rate, excellent stability and solubility, and high safety for people. Its chemical formula is C8H18O3, molecular weight is 162.13, and it is a colorless and transparent liquid.

Dipropylene Glycol Dimethyl Ether (DPDM) is a low-toxic, moldable, hydrophilic, non-ionic, multi-purpose, environmentally friendly solvent with a slight ether odor, a moderate evaporation rate, excellent chemical stability, extremely excellent solubility, and high safety for people. The United States and the European Union list it as a green solvent for Non HAP/NAP. It is usually used in water-based and curing coatings and chemicals such as medicines and pesticides. It is widely used in cleaning agents, co-solvents, organic synthesis reaction solvents, additives and wetting solvents. It can replace N-methylpyrrolidone for cleaning agents in the electronics industry. In addition, it can also be used to synthesize polyurethanes.

Main uses:

1.  Water-based and curing coatings: Dipropylene glycol dimethyl ether is often used in water-based and curing coatings as a solvent and diluent.
2.  Polyurethane: It can be used to synthesize materials such as polyurethane.
3.  Printing inks and enamels: Dipropylene glycol dimethyl ether is also used as a solvent for printing inks and enamels.
4.  Cutting oils and working oils: It is used as a solvent and detergent in cutting oils and working oils.
5.  Household and industrial cleaners: It is used in household and industrial cleaners, metal cleaners and hard surface cleaners.
6.  Agricultural pesticides: It is used as a stabilizer for agricultural pesticides.
7.  Cosmetics: It is used as a coupling agent and skin care agent in cosmetics.

Unilong is a professional Dipropylene glycol dimethyl ether with CAS 111109-77-4 manufacturer, we can provide a variety of product specifications of Organic Chemistry, quality assurance, fast delivery, have in stock. If you need any help, please contact us.

Poly (p-styrene sulfonic acid)(PSSA) is a polymer used as a hole-injection electrode in polymer-based light-emitting devices. Because of its low toxicity, high water solubility, high conductivity and other advantages, it is mainly used as a conductive polymer for antistatic coatings, polyelectrolytes, electrorecording and electrophotographic substrates and conductive and antistatic resins.

Polystyrene sulfonic acid CAS 28210-41-5 is a kind of polymer material obtained by sulfonic acid treatment based on polystyrene. Its structure makes it have good stability and excellent hydrophilicity, so it can show strong performance in many fields.

What Ichs Polystyrene sulfonic acid CAS 28210-41-5 Used For?

1.Water treatment

Polystyrene sulfonic acid is particularly widely used in the water treatment industry. It can be used as a flocculant to effectively remove suspended solids and impurities from water. Make the sewage clear and transparent, polystyrene sulfonic acid has a great role.

2.Plastics industry

In the plastics industry, polystyrene sulfonic acid is widely used as a plasticizer. It can improve the processing properties of plastics and make plastic products more flexible and durable.

3.The field of medicine

The application of polystyrene sulfonic acid in the field of medicine is also remarkable. It is used as a carrier in the drug delivery system to help drugs be released into the body more efficiently.

4.Electronics industry

In the electronics industry, polystyrene sulfonic acid is used as a conductive material. Its excellent electrical conductivity makes it an ideal choice for many electronic components.

5.Textile industry

As a highly effective antistatic agent, polystyrene sulfonic acid can significantly reduce the surface resistance of the material and effectively prevent the generation and accumulation of static electricity.

Advantages:

1. widely used in conductive materials, antistatic agent industry

2. low toxicity, high water solubility, high conductivity

3. conductive polymer

If you need Polystyrol-Sulfonsäure CAS 28210-41-5, please contact us.

PVP polyvinylpyrrolidone with CAS 9003-39-8, is a linear polymer polymerized from N-vinylpyrrolidone (‌NVP)‌. ‌Its molecular formula is (C6H9NO)n, ‌where n represents the degree of polymerization, ‌that is, the molecular weight of the polymer. ‌PVP has specific chemical structure and physical properties, ‌making it widely used in many fields.

With the increasing severity of global environmental problems, reducing plastic pollution and promoting sustainable development have become urgent issues to be solved. Biodegradable plastics are of great significance to environmental protection because of their ability to degrade in the natural environment and reduce long-term plastic waste. Such materials can be broken down by microorganisms under certain conditions and eventually converted into carbon dioxide, water and biomass, reducing the damage to the ecosystem. However, biodegradable plastics still need to be further optimized in terms of mechanical properties and degradation rate.

‌ The application of polyvinylpyrrolidone  in biodegradable plastics is mainly reflected in its application as a modifier, which significantly improves the mechanical properties and degradation rate of the material by combining with other biodegradable materials. ‌

PVP is a synthetic water-soluble polymer with high solubility, adhesion and chemical stability. Due to its good film formation and chemical stability, PVP can be used as a modifier to combine with other biodegradable materials such as polyvinyl alcohol (PVA) to significantly improve the overall environmental performance of the material. For example, studies have shown that PVP can increase the hydrolysis rate of PVA, thus accelerating the biodegradation process of plastics‌. In addition, the introduction of PVP can also increase the toughness and elasticity of the material, making it more durable and reliable in practical applications‌.

PVP is used as a catalyst to accelerate the degradation of plastics. Compared with traditional plastic degradation technology, PVP catalytic degradation technology has the following advantages:

(1) Low cost: PVP, as a common and cheap polymer, has a relatively low cost of degradation reaction, which is convenient for large-scale application;
(2) Efficient degradation: PVP catalyst can effectively decompose plastics, accelerate the degradation process, so that the degradation rate can be improved, and the degradation effect is more significant;
(3) Environmental protection and sustainable: PVP catalytic degradation technology can achieve efficient degradation of plastics, and will not produce toxic and harmful substances, more friendly to the environment.

The combination of PVP and PVA is a typical successful case. PVA/PVP hydrogels prepared by γ-ray irradiation have demonstrated excellent biodegradability and antimicrobial properties, which makes them have wide application potential in medical and agricultural fields. Specific case studies have shown that the degradation rate of PVA/PVP hydrogels in soil is significantly increased, helping to reduce the environmental impact of agricultural waste‌.

The advantages of PVP as a modifier lie in its high solubility, excellent film formation and chemical stability, which enable it to enhance the mechanical properties and degradation rate of biodegradable plastics. However, PVP is not a fully biodegradable material on its own, so it needs to be combined with other biodegradable materials when used. In addition, PVP is heavily used in aquaculture as a polymer that is difficult to biodegrade and may cause long-term pollution to the environment.

In summary, the application of PVP in biodegradable plastics is mainly through combining with other biodegradable materials to significantly improve the performance and environmental adaptability of materials.‌

‌Cellulose acetate butyrate (CAB)‌ is a cellulose ester produced by the esterification reaction of acetic acid and butyric acid. It is usually white floc or granular material, similar to cellulose acetate‌. Cellulose acetate butyrate has good solubility in polar solvents, especially those containing hydroxyl groups‌. It has good weather resistance and cold resistance, suitable for outdoor use‌. In addition, it also has good thermal stability, with a melting temperature of 140°C and a heat distortion temperature between 45 and 94°C.

Modification research: Cellulose acetate butyrate can be modified to improve its properties. For example, water-soluble resin made of acrylate-grafted cellulose acetate butyrate is synthesized through solution polymerization method, which can significantly improve its hardness, adhesion and other properties‌. In addition, by using maleic anhydride to modify cellulose acetate butyrate, a photocurable coating with good water resistance and high hardness can be obtained‌. These modification methods further expand the application scope of cellulose acetate butyrate.

As we all know, there are many types of CAB. Let us sort the differences between different popular models:

CAB-381-0.1

CAB-381-0.1 product features: low viscosity, faster drying, no yellowing, no cracking.

Application: Adding it to metal coatings can accelerate the release of solvents from the paint film and shorten the touch-drying time; adding it to plastic coatings can enhance wear resistance, color stability, and increase toughness.

CAB-381-0.5

CAB 381-0.5 is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder.

CAB-381-0.5 can improve the drying speed, polishing and fluidity of automotive varnishes, thereby bringing a better appearance and improving the coating efficiency of auto repair shops. In wood coatings, it can make the coating resistant to yellowing. In coil coatings, it can improve the matting efficiency, pigment dispersion and co-dispersant of the coating. In printing, it has good leveling and adhesion.

 CAB-381-2

CAB-381-2 product features: excellent weather resistance and UV resistance; excellent flexibility; excellent miscibility, leveling and anti-“runny nose”.

Application: automotive paint, plastic paint, wood paint, ink, leather paint, paper paint to increase drying speed.

 CAB-551-0.01

CAB-551-0.01 has many unique properties that allow it to be used in many different coating applications. It has the lowest Tg (glass transition temperature) and M (n) of the CAB group, which makes it compatible with other coating components. It is compatible with many cross-linking resins and has a low solution viscosity.

In coatings, CAB-551-0.01 provides clear films, reduces surface tack and spotting, minimizes cratering, improves flow and thermal reflow, and provides inter-coat adhesion and good UV stability. Its good compatibility with a variety of curing resin systems and its solubility in a variety of solvents and solvent combinations make it useful as an additive in digital coating compositions. It is often used in gravure printing, inkjet, printing inks, metal coatings, packaging and carton coatings, etc.

CAB-551-0.2

CAB-551-0.2 is a cellulose ester with high butyryl content and low relative molecular weight. It is compatible with many cross-linked resins and can obtain lower viscosity. In coatings, cellulose acetate butyrate (CAB-551-0.2) has good transparency, reduces surface spots, reduces shrinkage, improves fluidity, provides interlayer adhesion and good UV resistance. This product can improve the durability of cross-linked systems. Due to its excellent compatibility and solubility, it can be used as a useful additive in a variety of coating systems.

CAB-551-0.2 has little odor and excellent oil resistance. It can be used for printing inks, paper and fabric coating, and UV resistance. It is widely used in the coating industry and has its uniqueness, which is difficult to be replaced by other chemicals; in the automotive and furniture industries, it has excellent weather resistance and UV resistance.

The molecular formula of 1,1,1,3,3,3-Hexafluoro-2-propanol CAS 920-66-1 is C3H2F6O, and the molecular weight is 168.04. It is a colorless, transparent liquid chemical. Hexafluoro has a series of unique physical properties. Its density is 1.605 g/mL (25℃), melting point is -4℃, boiling point is 59℃, and refractive index (n20/D) is 1.275 (lit.). It is miscible with water or most organic solvents in any proportion, but is insoluble in long-chain alkanes. These physical properties make hexafluoroisopropanol play a unique role in different application scenarios.

1,1,1,3,3,3-Hexafluoro-2-propanol has the characteristics of strong polarity, stability, low boiling point, strong acidity and strong hydrogen bond donor ability. Its strong polarity enables it to interact with a variety of substances and play a unique role in chemical reactions. Stability ensures that it is not easy to decompose in various environments, providing a basis for its wide application. The low boiling point makes it easy to volatilize and separate in some specific process. The strong acidity allows it to be used as a catalyst and neutralizer in chemical reactions, with the advantages of reducing side reactions and expanding the range of reaction substrates. At the same time, the strong hydrogen bond donor ability enables it to form hydrogen bonds with other molecules, further affecting its physical and chemical properties.

1,1,1,3,3,3-Hexafluoro-2-propanol is miscible with water and many organic reagents and is an ideal solvent for many polymers. It can dissolve a variety of polymers, such as polyester, polyamide, polyacrylonitrile, polyacetal and hydrolyzed polyvinyl ester. This solubility is of great significance in the field of chemical analysis. It is an important analytical reagent and a regenerator for improving the utilization rate of polymers.

1,1,1,3,3,3-Hexafluoro-2-propanol is used as an esterification reagent in chemical reactions. It can promote the esterification reaction and improve the reaction efficiency.

In electronics, hexafluoroisopropanol can be used as a solvent cleaner. Due to its high polarity, miscibility with water and many organic solvents, good thermal stability and ultraviolet light transmittance, it can effectively dissolve dirt and impurities on electronic components without causing damage to them.

Hexafluoroisopropanol is an intermediate for the synthesis of inhalation anesthetic sevoflurane and also an intermediate for the synthesis of agricultural chemicals. In the field of medicine, sevoflurane is the main active ingredient of the most commonly used inhalation anesthetic sevoflurane in clinical practice. It has many advantages such as good controllability, rapid anesthetic onset, and strong metabolic capacity.

Hexafluoroisopropanol has significant advantages as a plastic recycling agent. It uses its super solubility to dissolve plastics mixed with pollutants and other impurities such as metal ions. Then, through separation, standing, extraction and other processes, pure plastics can be obtained.

Unilong is a professional hexafluoroisopropanol manufacturer. If you need hexafluoroisopropanol, please contact us.

N-Acetyl-D-Glucosamin CAS 7512-17-6 occupies an important position in biological cells. It is the basic component unit of many important polysaccharides, especially the exoskeleton of crustaceans. Its chemical formula is C8H15NO6 and its molecular weight is 221.21. It appears as a white powder.

N-Acetyl-D-Glucosamine CAS 7512-17-6 plays an important role in the medical field. It is widely used to treat joint diseases such as rheumatic and rheumatoid arthritis. It can relieve joint pain, improve joint mobility, and help slow the progression of joint degeneration.

N-Acetyl-D-Glucosamine CAS 7512-17-6 is widely utilized in pet food, pet nutritional supplements, and pet skincare products due to its notable effects in treating arthritis, preventing urinary infections, reducing hair shedding, boosting immunity, and regulating gut microbiota balance.

In the field of cosmetics, N-Acetyl-D-Glucosamin CAS 7512-17-6 is used to improve skin quality. It can promote the synthesis of collagen, help maintain skin elasticity and moisture, improve skin dryness and aging, and has moisturizing and anti-aging effects.

N-Acetyl-D-Glucosamine, as a novel plant immune inducer, has shown significant effects in disease resistance, yield enhancement, and pesticide mitigation for economically important crops such as tea, fruits, and staple crops like rice.

If you need N-Acetyl-D-Glucosamin CAS 7512-17-6, please contact us.

Polycaprolactone (PCL) is a high molecular weight organic polymer produced by ring-opening polymerization of ε-caprolactone monomer under the catalysis of metal anion complex catalyst. It is a semi-crystalline linear aliphatic polyester.

Polycaprolactone with cas 24980-41-4 has good processing characteristics and can adapt to a variety of processing methods such as extrusion, injection molding, and film blowing. This makes it highly flexible in the production process and can be processed into products of various shapes and sizes according to different needs.

Polycaprolactone exhibits excellent biocompatibility. It has good compatibility with biological cells in the body, cells can grow normally on its scaffold, and can be degraded into CO₂ and H₂O. This property makes polycaprolactone have a wide range of application prospects in the medical field, such as being used as a controlled release drug carrier, cell and tissue culture medium frame, and fully degradable plastic surgical sutures.

Under the background of global “plastic ban”, polycaprolactone has become a rising star in the field of biodegradable plastics with its good biodegradability. As people’s awareness of environmental protection continues to increase, the demand for biodegradable materials will continue to grow.

As a biodegradable green and environmentally friendly material, polycaprolactone has broad application prospects and huge potential in future sustainable development. With the continuous advancement of technology and the continuous expansion of application fields, polycaprolactone will surely play a more important role in various fields.

In today’s rapidly changing science and technology, all kinds of magical substances continue to emerge, bringing many surprises to our lives. And sodium hyaluronate, this seemingly strange term, has quietly entered our lives and become a messenger of beauty and hope.

What is Sodium hyaluronate？

Sodium hyaluronate, also known as hyaluronic acid, CAS 9067-32-7, is a substance that occurs naturally in the human body. It has a powerful moisturizing function, can absorb its own weight of water thousands of times, inject full of water vitality into the skin. In the field of beauty, sodium hyaluronate is a shining star. It is widely used in skin care products, cosmetics and medical cosmetics, bringing beauty and confidence to people.

What is the effect of sodium hyaluronate

1. Moisturizing, nourishing, promoting skin repair and healing, anti-wrinkle and other effects.

2. Sodium hyaluronate has the functions of moisturizing, nourishing and repairing in cosmetics.

3. Efficacy and function of sodium hyaluronate in the fields of medical cosmetology and joint health care.

What is the application of sodium hyaluronate?

Since ancient times, the pursuit of beauty has never stopped. Since ancient times, people have been using a variety of natural substances to maintain the skin. And now, with the development of science and technology, the emergence of sodium hyaluronate has added new impetus to our beauty road. It is like a magic magician, can instantly make the skin become hydrated and smooth, glow with youth. When we have healthy and beautiful skin, we will be more leisurely to face the challenges of life and show the best side of ourselves. Sodium hyaluronate in cream, cream, honey, milk, facial mask, shampoo and other cosmetics as a moisturizing agent, keep skin and hair moisture, increase the role of luster.

However, the significance of sodium hyaluronate is much more than that. In the medical field, it also plays an important role. Sodium hyaluronate can be used to treat joint diseases, relieve pain, and improve joint function. It is like a gentle guardian, bringing hope and comfort to patients. In addition, sodium hyaluronate can also be used in eye surgery, wound healing and other aspects of human health has made a great contribution.

The progress of science and technology has brought us countless possibilities, and sodium hyaluronate is one of them. Its emergence, let us see the pace of human beings in the pursuit of health and beauty on the road. In the future, with the continuous development of science and technology, it is believed that sodium hyaluronate will play a greater role and bring more surprises to our lives.

At the same time, we should also understand and use sodium hyaluronate correctly. In the pursuit of beauty and health, we can not blindly follow the trend, but should choose the right products and methods according to their actual situation. Only in this way can we truly bring out the advantages of sodium hyaluronate and let it bring more beauty to our lives.

What is nonivamide？

Nonivamide, also known as capsaicin, is the active ingredient of the red pepper plant. It is irritating to mammals, including humans, and can create a burning sensation in the skin. The molecular formula of capsaicin is C17H27NO3, molecular weight is 293.4, cas 2444-46-4. This compound has water-repellent lipophilic properties and is colorless and odorless crystalline or waxy compound. Nonivamide is not only found in red pepper, but also widely used in food, medicine and other industrial fields, and has attracted attention for its unique spicy taste and physiological activity. In addition, Nonivamide has some potential health benefits, such as helping with weight loss, which makes it an important object for scientific research and technological development.

Nonivamide is a natural alkaloid. It is a highly volatile, lipophilic and hydrophobic white crystalline powder 85% to 95% of nonivamide can be rapidly absorbed through the gastrointestinal tract. After absorption, nonivamide is mainly metabolized by liver cytochrome enzyme P450, and a small part is hydrolyzed in the small intestine. Metabolites are excreted mainly through the kidneys, and a small part is excreted in the form of prototype feces and urine. After systemic administration, capsaicin concentrations were higher in the brain, spinal cord and liver.

What is nonivamide used for?

Military field: nonivamide has important military applications as a rodent repellent, helping to prevent damage to military installations.

Pharmaceutical field: The application of nonivamide in the pharmaceutical field includes analgesia without addiction, inhibition of bacteria and fungi, and promotion of blood circulation. Nonivamide can be made into a rub, tincture, cream, patch and other forms.

Agricultural field: nonivamide as an expelling agent, the use of its strong tear-jerking effect, used in the manufacture of tear-jerking and other expelling equipment, personal defense articles, widely used in agriculture to expel pests and wildlife.

Marine antifouling field: nonivamide is used as a biological antifouling agent, has been used in Marine antifouling coatings, coated on ships and Marine buildings in contact with the seawater to prevent the attachment of algae, shellfish, mollusks and other Marine organisms, in order to prevent the accumulation of aquatic organisms in the hull of the purpose of replacing the traditional organotin antifouling coatings.

Cosmetics and health care products: nonivamide is widely used in food, health care products, cosmetics and other fields, its tear-inducing properties make it an ideal ingredient in these fields.

In addition, nonivamide also has pharmacological effects such as analgesic, anti-inflammatory, frostbite, antipruritic, bactericidal, drug rehabilitation, etc. It should be stored at low temperature, and long-term exposure to air will lead to reduced content.

We are a nonivamide supplier, nonivamide products for a long time in stock supply, can provide different specifications of packaging options, and according to demand for sub-packaging. Unilong is a domestic high-quality chemical supplier, some products can even be delivered on the same day, and the transportation is convenient and fast, and the global delivery, if you need, please feel free to contact me.

Zirconium dicarbonate, ZBC, CAS No. 36577-48-7, zirconium dicarbonate is a white or colorless chemical that is soluble in acid and delixable, requiring airtight storage. Zirconium dicarbonate ZBC is a processing agent used in the production of high-grade paints, coatings and fibers. Let’s take a look at zirconium dicarbonate.

Properties of Zirconium dicarbonate:

Melting point: zirconium dicarbonate has a melting point of 135°C‌.

Solubility: zirconium dicarbonate is insoluble in water and common organic solvents, but soluble in acidic aqueous solutions. It can be dissolved in acetic acid, caprylic acid, capric acid and other organic acids to produce the corresponding organozirconium compounds, and can be dissolved in potassium carbonate and ammonium carbonate to produce the corresponding zirconium carbonate derivative compounds.

Chemical stability: zirconium dicarbonate is easily converted into zirconium oxide at high temperatures and is sensitive to heat sources. At high temperatures, it will decompose and release a molecule of carbon dioxide to produce the corresponding zirconia, so it is also the most economical raw material for the production of ultrafine zirconia ‌.

Storage precautions: zirconium dicarbonate is stored in a cool, ventilated warehouse. The storage temperature should not exceed 37°C.

We are professional zirconium dicarbonate manufacturers, can provide different zirconium carbonate:

What are the applications of zirconium dicarbonate?

‌Industrial uses: Zirconium dicarbonate is used in the manufacture of ternary catalysts, zirconium compound intermediates, chemical reagents ‌.

‌Automotive industry: Zirconium dicarbonate is also used as a catalyst for automotive exhaust gas treatment, playing a key role in reducing harmful substances in automotive exhaust emissions.

Paints and paints: Zirconium dicarbonate plays an important role in the production of high-grade paints and coatings, enhancing the performance and durability of coatings.‌

Fiber treatment agent: In addition, ZBC is used as a fiber treatment agent to improve the physical and chemical properties of the fiber and make it more suitable for specific application scenarios.

In summary, because of its unique physical and chemical properties, zirconium dicarbonate ZBC plays an important role in a number of industrial fields, from automobile exhaust treatment to the manufacture of high-grade coatings, to fiber treatment agents, are inseparable from the application of zirconium dicarbonate.

Polyethyleneimine (PEI) is a cationic polymer with multiple amino groups, CAS number 9002-98-6. PEI has a wide range of applications in various fields due to its unique chemical and physical properties. The diversity and multifunctionality of polyethyleneimine make it a very useful industrial chemical. Next, we will mainly understand the application of polyethyleneimine in the field of polymers. PEI, due to its unique chemical structure and functional properties, can be used as a compatibilizer between polymers. Mainly by forming hydrogen bonds or ionic bonds to interact with different polymer substrates, the compatibility of polymer mixtures is improved. What are the main factors we consider when choosing polyethyleneimine as a compatibilizer?

1. Solubility: PEI with lower molecular weight usually has better solubility, which may help improve its dispersibility in polymer mixtures.

2. Reactivity: PEI with higher molecular weight may have higher reactivity and can react more effectively with other polymer chains to form stronger chemical bonds.

3. Compatibility: The choice of molecular weight also affects the compatibility of PEI with the target polymer. Sometimes, PEI with medium molecular weight may provide the best compatibility and compatibilization effect.

However, polyethyleneimine should be noted that factors such as the concentration, molecular weight, and reaction conditions of polyethyleneimine can affect its effectiveness as a compatibilizer. Different applications may require PEI with different molecular weights. For example, in water treatment or gas purification applications, higher molecular weight PEI may be required to enhance its adsorption performance. In practical applications, it may be necessary to determine the most suitable PEI molecular weight for a specific polymer system through experiments. Usually, suppliers will provide PEI products with different molecular weights to meet the needs of different customers.

At the same time, cost-effectiveness should also be considered. PEI with higher molecular weight may have higher costs. In practical applications, polyethyleneimine may be necessary to determine the most suitable PEI molecular weight for a specific polymer system through experiments. Usually, polyethyleneimine suppliers will provide polyethyleneimine PEI products with different molecular weights to meet the needs of different customers. When selecting the appropriate PEI molecular weight, reference can be made to the technical data sheet (TDS) and safety data sheet (SDS) provided by the Unilong, as well as relevant research literature and experimental data.

In addition, as the specific recommended molecular weight may depend on specific polymer systems and application requirements, polyethyleneimine is recommended to collaborate with materials scientists or chemical engineers to conduct detailed experiments and analysis to determine the optimal PEI molecular weight.

Ethylene carbonate is an organic solvent with excellent properties, which can dissolve various polymers. It can also be used as an organic intermediate, can replace ethylene oxide for dioxylation reaction, and is the main raw material for the production of dimethyl carbonate by transesterification. Ethylene carbonate has a wide range of uses, including as an organic solvent, synthetic intermediate, and solvent for lithium battery electrolyte.

What is ethylene carbonate？

Ethylene carbonate EC, CAS number 96-49-1. EC is a clear colorless liquid with the chemical formula C4H6O3, with a flavor similar to ester, with a melting point of -47 ° C and a boiling point of 126~127 ° C. Ethylene carbonate is non-flammable, insoluble in water, and volatile, and can dissolve in alcohols, ethers, and aromatic hydrocarbons. Ethylene carbonate is a compound widely used in polyester, cosmetics and industry due to its excellent stability and optical transparency and excellent solubility in various media.

Is ethylene carbonate toxic?

Ethylene carbonate (‌EC) ‌is a common chemical raw material in ethylene carbonate (‌EC) ‌ with high boiling point, ‌odorless, and ‌having high solubility to high polymers. Ethylene carbonate itself is exposed to air for crystallization ‌does not cause great harm. The low toxicity of ethylene carbonate means that has less effect on human body when used and treated with ethylene carbonate than some other chemicals. ‌However, to be safe, ‌is still required to avoid contact with skin and eyes, ‌and take appropriate protective measures.

What is ethylene carbonate used for?

Application of Ethylene carbonate in the manufacture of polyester ethylene carbonate plays an important role in manufacturing polyester materials. Polyester materials are widely used in food packaging, beverage bottles, chemical fibers, automotive parts and other fields. Ethylene carbonate is an important intermediate in the production of polyester. Through polymerization reaction, Ethylene carbonate can be combined with ethylene glycol to form polyester chain to form polyester material. Polyester has many properties such as high hardness, good strength and UV radiation resistance, so it is widely used.

Application of ethylene carbonate in industrial applications

Ethylene carbonate also plays an important role in industrial production. As a catalyst for the synthesis of polymers and coatings, Ethylene carbonate can be used to produce various functional polyamides, epoxy resins and aliphatic polyesters. In addition, Ethylene carbonate can also be used as an intermediate of furan resin to accelerate the hardening reaction of the material and improve process parameters and product quality. Ethylene carbonate can be used as pharmaceutical ingredient and raw material, fiber finishing agent, water glass slurry, etc. In addition, it can also be used as a solvent to remove acid gas and as an additive to concrete.

Use of ethylene carbonate in cosmetics and personal care products

Ethylene carbonate is also widely used in cosmetics and personal care products such as lipstick, nail polish, sunscreen and shampoo. Ethylene carbonate can be used to increase the opacity of cosmetics, improve surface gloss, and enhance the durability of ink coatings. Ethylene carbonate can also be used to manufacture artificial pearls and increase the stability of the material.

Application of ethylene carbonate to lithium battery

Ethylene carbonate is an excellent solvent for lithium-ion battery electrolyte in the battery industry, especially in lithium-ion batteries, where its electrolyte composition with high permittivity is crucial for improving battery performance. In order to reduce the viscosity and melting point of the electrolyte, other components such as dimethyl carbonate and methyl ethyl carbonate can be added.

To sum up, vinyl carbonate not only has a variety of applications in the chemical industry, but also plays an important role in new energy fields such as the production of lithium battery electrolytes. With the continuous development of new energy technologies, the demand for vinyl carbonate is expected to grow further. Our company is a professional manufacturer of ethylene carbonate with rich experience in the chemical industry. As we produce and market ethylene carbonate by ourselves, we have advantages in ethylene carbonate bulk price. At the same time, I hope this article can help you understand the product ethylene carbonate.

What is 2-Hydroxyethyl acrylate ?

2-Hydroxyethyl acrylate for short HEA, can also be called 2 hydroxyethyl acrylate, CAS number 818-61-1. HEA is an organic compound, molecular formula C5H8O3, is a colorless liquid, soluble in general organic solvents, miscible with water. The use of hydroxyethyl acrylate is very wide, HEA is mainly used in the production of thermosetting coatings, adhesives, fiber treatment agents and synthetic resin copolymer modifier.

The molecular weight of 2-Hydroxyethyl acrylate is an important physicochemical property, which affects the application of 2-Hydroxyethyl acrylate in different fields. By calculating the relative atomic mass and number of each element in the formula, the molecular weight of 2-Hydroxyethyl acrylate can be obtained. In the coatings, adhesives and ink industries, the molecular weight of 2-Hydroxy Ethyl Acrylate (HEA) has a significant impact on the performance and quality of the product. HEA with different molecular weight has different characteristics in different application fields, and reasonable selection of molecular weight can improve the performance and application effect of the product.

What is 2-Hydroxyethyl acrylate used for?

Coating industry

In the coating industry, 2-Hydroxyethyl acrylate molecular weight affects the rheological properties, film resistance and curing effect of coatings. Generally, 2-Hydroxyethyl acrylate with lower molecular weight has lower viscosity and higher reactivity and is suitable for preparing high molecular weight polymers, improving the wear resistance, scratch resistance and weather resistance of coatings. And 2-Hydroxyethyl acrylate with higher molecular weight is used to prepare low molecular weight polymer, which is mainly used to adjust the leveling and viscosity of coatings.

Adhesive industry

2-Hydroxyethyl acrylate, as an important adhesive material, is widely used in the adhesive industry. During the preparation of adhesives, the molecular weight of HEA will directly affect the adhesives’ viscosity, bond strength, weather resistance and adhesion to different materials. HEA with higher molecular weight can improve the bonding strength of adhesives, while hydroxyethyl acrylate with lower molecular weight can improve the fluidity of adhesives and facilitate coating and use.

Ink industry

In the ink industry, the molecular weight of 2-Hydroxyethyl acrylate has an important impact on the performance and printing effect of the ink. High molecular weight 2-Hydroxyethyl acrylate has good gelling and thickening effect in ink, which can improve the printing performance and quality of ink. Low molecular weight HEA can increase the fluidity of ink and improve the wettability and transfer of ink.

Is 2 hydroxyethyl acrylate safe for skin?

2-Hydroxy Ethyl Acrylate (HEA)‌ normally harmless to the skin, acrylate is a water-soluble transparent gelatinous substance that is made under dry conditions as a lubricant and is commonly used in skin care products. Most people use acrylic skin care products will not stimulate the skin, and after applying on the skin surface can form a protective film, can achieve the role of moisturizing the skin, but also to avoid excessive loss of water in the skin, lubrication, wrap the skin waterproof evaporation and other effects, can improve the relatively dry skin, can alleviate skin peeling, peeling symptoms. If it is in the autumn and winter season, the weather is relatively dry, you can choose moisturizing skin care products containing acrylic and other ingredients to apply to prevent the skin from excessive dryness and cracking. If it is allergic people, it is recommended to test behind the ear before use to prevent the occurrence of large skin allergies.

Unilong is a professional 2-hydroxyethyl acrylate supplier. Due to the special physicochemical properties of HEA, safety measures for use and storage are very necessary. Generally, it is stored in a cool place, the container is stored in a closed container and kept cold. If you have any further questions about HEA, please feel free to contact us and look forward to your feedback.

What is N-Vinyl-2-pyrrolidone?

N-Vinyl-2-Pyrrolidon ( NVP) also known as vinyl 2 pyrrolidone, 1-ethenyl-2-pyrrolidinon NVP. At room temperature, NVP is a colorless or light yellow transparent liquid with a slight odor, easily soluble in water and other organic solvents. N-Vinyl-2-pyrrolidone chemical formula is C6H9NO, cas number 88-12-0. has a wide range of applications. N-Vinyl-2-pyrrolidone is widely used in cosmetics, washing products, medicine, photosensitive materials and other fields. N-vinylpyrrolidone is mainly used in the production of polyvinylpyrrolidone, polyvinylpyrrolidone (PVP) is widely used in medicine, daily chemical and food industry and other fields.Let’s take a look at the NVP product.

Chemical properties of NVP

The structure of the NVP contains a letter “N”, which indicates that the compound has a nitrogen-containing group. NVP also contains

There is a vinyl, and its presence makes the NVP more susceptible to chemical reactions. NVP can be combined with polyacrylic acid and poly

The copolymerization of vinyl alcohol and other polymers was carried out to form polymer composites. The polymerization is achieved by free radical mechanism

N-Vinyl-2-pyrrolidone is very little affected by light, temperature, oxygen and other factors, so it can be carried out under a wide range of reaction conditions.

NVP has good solution stability and can exist stably in different solution systems such as water and organic solvents. At the same time, because NVP contains pyrrole ring structure, it also has good barrier property and permeability resistance. This allows NVP to be widely used in different types of polymer materials such as cellulose, polyethylene, and polypropylene.

The unique properties of N-Vinyl-2-pyrrolidone make it an important raw material in a variety of industrial fields. ‌, for example, ‌N-Vinyl-2-pyrrolidone is widely used for its hydrophilicity, ‌ strong polarity, low toxicity and cationic activity in the industrial fields of adhesives, coatings, textiles, ‌ food and pharmaceutical, Most of these compounds have good film strength, staining compatibility, rigidity and viscosity, provide important support for the quality and properties of related products.

Was ist N-Vinyl-2-Pyrrolidon for?

1. Plastic

NVP monomers can be added to the formulation of UV-curable coatings to form a flexible and rigid plastic film. The addition of NVP to radiation medical formulations can improve the elongation and viscosity of high-light and low-light coatings.

2. Wood

NVP can enhance product performance, improve productivity and reduce the pressure on environmental pollution, and is the main reason for the use of scatter coatings in the furniture industry to be investigated. The addition of NVP to anti-ultraviolet coatings used in the general wooden flooring industry can provide comparable physical properties to wax-free flooring.

3. Paper Making

UB and EB curing coatings used in paper or paperboard generally require lower viscosity and high reactivity. NVP meets these standards by improving fluidity and measurement levels, while maintaining good curing properties.

4. Metal

UV coatings for metals are generally formulated using cationic vinyl ether/epoxy chemical or heterocyclic systems, and the function of NVP is to cross-link with the functional groups of vinyl ether or acrylic acid to form an excellent active diluent in these systems.

5. Ink

The packaging market uses EB and UV curing technologies to speed up production and reduce energy consumption. Curing inks with excellent performance and less odor occupy an important part of the screen ink market. It can improve the physical properties of the product ‌ especially in the formulation of UV-curable coatings ‌NVP can form a flexible and hard plastic film. ‌

6. Electronics

Electrical equipment manufacturers rely on UV coatings for rapid processing and low temperature processing to protect cables and electrical components as well as printed circuit boards.

7. Adhesives

NVP can be used in adhesives where stringent emission requirements and the need for high curing rates have prompted the industry to develop a wide range of curing adhesives.

8. The field of medicine

NVP is a widely used drug monomer that can be used to prepare a variety of synthetic drugs. For example, NVP can be copolymerized with other monomers to prepare a heat-sensitive hydrogel, which can be used in medical products such as wrapping hot packs and heat patches. In addition, NVP can also be used with other biomedical materials to prepare highly biocompatible and bioactive composite materials.

9. Cosmetics

NVP can be used to prepare various oil-water emulsions, foaming agents, gels and other cosmetic products. In particular, the copolymerization of NVP with other products can prepare a polymer with efficient moisturizing function, which is widely used in skin care products, makeup and other cosmetic fields.

You read here, I think you should have a general understanding of the nvp product, nvp with its wide range of uses, the market prospect is also very broad. We have been engaged in the chemical industry for more than ten years, with mature technology and professional technical personnel, so we are a professional manufacturer of N-vinyl-2-pyrrolidone nvp, and we also produce other products in the PVP series, for example, pvp k15,pvp k25, pvp k30, pvp k60, pvv k90, pvp k120, pvpp, etc.

Glyoxylic acid monohydrate is an important chemical intermediate which is mainly used in pharmaceutical, pesticide, dye and plastic industries. The synthesis process of Glyoxylic acid monohydrate has been optimized to reduce environmental pollution and improve production efficiency. At present, the market demand for this compound is steadily growing, especially in the field of green chemistry, as it can be used as a feedstock for biodegradable polymers, in line with the sustainable development trend.

What is glyoxylic acid monohydrate?

Glyoxylic acid monohydrate has the formula C2H4O4, molecular weight ‌ 92.05, cas 563-96-2. ‌Glyoxylic acid monohydrate exhibits stable chemical properties at room temperature and pressure ‌but it decomposes when heated or in contact with strong acids and ‌ bases, ‌forming acetaldehyde and carbon dioxide. ‌In addition, ‌glyoxylic acid monohydrate can be formed into complexes with metal ions, ‌can also be esterified, ‌ these properties make it a commonly used intermediate in organic synthesis.

Glyoxylic acid monohydrate has the properties of both aldehydes and acids, ‌which makes it play an important role in chemical synthesis. ‌The compound is also widely found in nature ‌ it is found both in immature fruits and in the tender green leaves. ‌

What is glyoxylic acid monohydrate used for? ‌

Medical field

Glyoxylic acid hydrate can be used as pharmaceutical raw material ‌especially in the preparation of some drugs has many uses in medicine, can be directly used, ‌can also be used as an additive, can be used as a cosmetic additive in light chemical industry, ‌can be used as a plant growth regulator in agriculture.

Industriellen Bereich

Glyoxylic acid hydrate can also be used as raw material for some fine chemical products, such as automotive paint additive.

Fragrance synthesis

Glyoxylic acid hydrate can be used to synthesize vanillin, ‌ethyl vanillin and other fragrances, ‌these fragrances are widely used in cosmetics, soap, ‌cigarettes, pastries, ‌ confectionery and baked goods, ‌is one of the most widely used fragrances. ‌

Field of pesticide production

In the field of pesticides, glyoxylic acid hydrate can be used to produce products such as glyphosate. ‌

Other applications

Glyoxylic acid hydrate can also be used to synthesize compounds such as p-hydroxyphenylacetic acid, ‌these compounds are also widely used in a variety of industries.

Because of its unique chemical properties, ‌ plays an important role in many fields such as medicine, ‌fine chemical industry, ‌spices and pesticides. Due to a wide range of uses, the market demand is relatively large, glyoxylic acid monohydrate price is also uneven, so we must pay attention to the selection of procurement. We are a professional glyoxylic acid monohydrate manufacturer, engaged in chemical production for more than 10 years, with a professional R & D team and advanced machinery and equipment, any question about the product, welcome to consult, look forward to working with you.

What is polyethyleneimine?

Polyethyleneimine (PEI), cas 9002-98-6 is a polymer compound with rich functional groups, which is widely used in chemistry, materials, biology and other fields. Polyvinylimide is a water-soluble polymer produced by the polymerization of ethylene imide. It is not a completely linear polymer, but a partially branched-chain polymer containing primary, secondary and tertiary amines. Polyvinylimide and other low molecular weight amines have a variety of chemical reactivity, and can be modified. Characteristics of Polyethyleneimine: Cation density in existing material, very high activity, water soluble ability.

Polyethyleneimine is a kind of synthetic material with a wide range of uses, which plays an important role in many fields. Polyethyleneimine has excellent properties and various application characteristics, making it one of the indispensable materials in industrial production and scientific research.

What is the use of polyethyleneimine?

1. Textile industry

Polyethyleneimine plays an important role in the textile industry. PEI can be used as a dyeing aid for textiles, which can improve the adsorption performance and color fixation of dyes, so that the dyeing effect is more bright and lasting. In addition, PEI can also be used as an antistatic agent for textiles, which can effectively reduce the electrostatic friction between textiles and the human body or other objects and prevent the adverse effects of static electricity.

2. Water treatment industry

Polyethyleneimine is also widely used in the water treatment industry. Due to its excellent adsorption capacity and ion exchange properties, polyvinylimide is widely used in water treatment for pollutant removal and wastewater treatment. PEI can absorb and remove pollutants such as heavy metal ions, organic matter and suspended matter in water, and improve the purification effect of water quality. At the same time, polyethylene imide can also be used as an auxiliary agent of water treatment agent, which can improve the stability and effect of water treatment agent.

3. Medical field

PEI is also widely used in medicine. PEI can be used as a sustained release agent and a controlled release agent of drugs, which can extend the release time of drugs and improve the stability of drugs to achieve better therapeutic effects. Polyethyleneimine can also be used to make drug carriers and drug delivery systems to treat systemic diseases, etc.

4. Electronics industry

PEI is also widely used in the electronics industry. Polyethyleneimine can be used as encapsulation material and insulation material for electronic components to improve the stability and reliability of electronic components. PEI can also be used as a thermal conductivity material and heat dissipation material for electronic equipment, which can effectively improve the heat dissipation performance of electronic equipment and prevent failure and damage caused by overheating.

In addition to these areas, polyethyleneimine has many other applications. For example, PEI can be used as a reinforcer for paper and a thickener for coatings, which can improve the strength of paper and the adhesion of coatings. Polyethyleneimine can also be used as an oil field production agent and oil exploration agent to improve the production rate and exploration efficiency of reservoirs.

PEI is a versatile synthetic material that plays an important role in textiles, water treatment, medicine, electronics and many other fields. Polyethyleneimine’s excellent performance and diverse application characteristics make it one of the important materials in industrial production and scientific research. With the development and innovation of science and technology, the application prospect of Polyethyleneimine will be broader.

Unilong is a professional polyethyleneimine manufacturer, with advanced production equipment and production lines, and is equipped with professional R&D team and technical personnel. Adhering to the purpose of “quality first, integrity management”, the company constantly improves the quality of products and has developed into a leader in the industry.

Tungsten trioxide (also known as WO3) is a promising material in the field of science and technology due to its unique properties. The material has attracted a lot of attention in recent years due to its potential applications in various fields, including energy, electronics, and environmental protection.

Advantages of tungsten trioxide:

One of the main characteristics of tungsten trioxide is its high stability and durability. Unlike many other materials, it does not degrade easily over time, making it ideal for long-term applications. In addition, its high thermal stability makes it suitable for use in high-temperature environments, making it ideal for use in a variety of energy and electronics applications.

Another important feature of tungsten trioxide is its excellent electrical conductivity. The material has high electron mobility and is suitable for use in electronic devices. In addition, its good electrical conductivity makes it an excellent candidate for producing solar cells that can be used to convert sunlight into electricity.

In addition to its electrical properties, tungsten trioxide also has excellent optical properties. Tungsten trioxide has high transparency in the visible region, which is ideal for use in display technology. Its high light absorption also makes it suitable for use in solar cells, where it can help improve the efficiency of the energy conversion process.

Tungsten trioxide also shows great promise in environmental protection applications. For example, tungsten trioxide can purify water by removing harmful pollutants such as harmful metals and organic pollutants. The material has also been studied in potential uses in research to remove pollutants from the air, as it can efficiently adsorb volatile organic compounds.

What is tungsten trioxide used for?

Tungsten trioxide (WO3), with catalytic, optical, electrical and other special properties and has a wide range of uses, such as used in petrochemical, photoelectric information, national defense and other fields.

Petrochemical field

In the field of petrochemical industry, the main use of tungsten trioxide can be used as a catalyst, when it is used as a catalyst, not only high catalytic activity, long service life, more importantly, environmental protection, non-toxic, pollution-free, basically do not have to worry about the additional environmental costs caused by strong acid catalyst, is a green and safe chemical. Therefore, tungsten trioxide is paid attention to by the industry and is widely used in the production of chemical products, such as paints and coatings, petroleum industry catalysts, industrial X-ray screen phosphors and fireproof fabric manufacturing tungstate.

Optoelectronic information domain

In the field of photoelectric information, tungsten trioxide has attracted much attention due to its advantages of good visible light response, environmental protection, non-toxic, high economic efficiency and relatively stable chemical properties under acidic conditions, such as tungsten trioxide has been applied to the production of electrochromic Windows, which can allow users to adjust the color and light transmission of their window glass through the change of applied voltage, and can achieve effective isolation of ultraviolet light; For example, tungsten trioxide can also be used as a fuel cell carrier, loaded with precious metals to form Pt/WO3/C catalyst, which greatly improves the corrosion resistance of the catalyst and improves the service life of the catalyst.

National defense and military industry

In the field of national defense, tungsten trioxide, as a sensitive material, has the advantages of simple structure, high shielding and high sensitivity, and has a strong absorption capacity for electromagnetic waves, and is often used as an important invisible material in concealing.

The use of tungsten trioxide is not only reflected in the above fields, but also in other fields, such as the metal fiber radiation protective clothing made in the medical field has the advantages of good shielding effect, good air permeability and washable.

In conclusion, tungsten trioxide is a very promising material with great potential for various applications in science and technology. Its unique combination of high stability, durability, electrical and optical properties makes it a highly versatile material that can be used in a variety of fields, including energy, electronics and environmental protection. With many potential applications, tungsten trioxide will play a key role in shaping the future of technology. We are professional tungsten trioxide manufacturers, please feel free to contact us if you have any questions.

Brushing teeth is something people do every day, and for the sake of oral health, people have to brush their teeth twice a day in the morning and evening. So how should we choose toothpaste? The main function of toothpaste is to clean teeth. Toothpaste is essentially a cleaning agent, and its basic function is to clean the oral cavity. If it has whitening, cavity prevention, desensitization, hemostasis and other effects, it is only auxiliary. At present, the common toothpaste additive in toothpaste is SMFP. Let’s take a look at SMFP.

What is SMFP?

SMFP is actually sodium monofluorophosphate, CAS number 10163-15-2. It is a white powdery solid with a melting point of about 626 ℃. It is easily soluble in water and has strong hygroscopicity. SMFP is a dental toothpaste abrasive, anti caries agent, and desensitizer used to protect the source of fluoride toothpaste treatment, with a total cost of 0.8%. It also serves as a raw material for preparing monofluorophosphates for fluoride content in drinking water and metal surface cleaning agents.

SMFP is a widely used toothpaste additive worldwide, used as an anti caries agent and toothpaste desensitizer. In addition, it is also used as a preservative and bactericide. The conventional addition amount in toothpaste is 0.76% by weight.

Is SMFP safe?

SMFP is an inorganic compound, and sodium monofluorophosphate can play a role in preventing tooth decay and improving tooth sensitivity in toothpaste. For pregnant women, sodium monofluorophosphate toothpaste can be used, but attention should be paid to the amount used to avoid excessive intake. For children, especially those under 6 years old, it is not recommended to use toothpaste containing sodium monofluorophosphate, as children may swallow toothpaste and long-term ingestion may cause fluorosis, leading to tooth deformities, softening, loss of enamel luster, and other problems.

Overall, SMFP toothpaste is beneficial for dental health, but caution should be exercised when using it in moderation, especially for special populations such as children and pregnant women.

What is SMFP used for?

SMFP application in toothpaste

Sodium monofluorophosphate is widely used in fluoride toothpaste, which can promote tooth remineralization and prevent tooth decay. It has good therapeutic effects on people with sensitive teeth and does not irritate teeth after use.

SMFP application in Food

Sodium monofluorophosphate can be used as a food additive in food as a source of fluorine. Some of the chewing gums we are familiar with include sodium monofluorophosphate in the raw materials, which makes these gums have functions such as caries prevention, desensitization, antibacterial and sterilization.

SMFP application in medical field

Sodium monofluorophosphate can promote bone cell differentiation and diffusion, leading to an increase in bone mass. Sodium fluoride also has the same function, but when taking equal amounts of both substances, sodium monofluorophosphate nitrocellulose promotes more bone mass growth. This chemical raw material can also be used to regulate blood lipids and lipoprotein metabolism in postmenopausal women.

In general, sodium monofluorophosphate (SMFP) is a high value-added fluorine containing inorganic fine chemical, mainly used as an anti-caries fluoride toothpaste additive, but also can be used as a preservative, fungicide, co-solvent, metal surface oxide cleaning agent, food additives, corrosion inhibitors, drinking water fluoridation, relieve osteoporosis and so on.

N-vinylcaprolactam physical properties

N-vinylcaprolactam is a white to light yellow solid with good solubility and thermal stability. These physical properties make it widely applicable in the preparation of polymer materials.

N-vinylcaprolactam product performance

Ethylene caprolactam (CAS No. 2235-00-9) is an olefin monomer. Its unsaturated double bond activity is high, and homopolymers and copolymers have inherent characteristics such as high polarity, water solubility, chemical stability, low toxicity, and cationic activity. In the field of radiation curing, it can improve the adhesion of coatings and inks, and has good adhesion to different substrates. It is a high value-added, environmentally friendly adhesive monomer. Meanwhile, it is also an ethylene based monomer suitable for UV curing reactions, which can be used in UV coatings UV ink UV polymerization reactions of various unsaturated systems such as UV adhesives. L is suitable for free radical curing systems.

Vinyl groups, N-vinylcaprolactam molecules contain vinyl groups, which give it strong activity and can participate in many important chemical reactions, such as polymerization and crosslinking reactions.

N-vinylcaprolactam product structure

N-vinylcaprolactam is an important organic compound with the molecular formula C10H17N02. Its structure contains a caprolactam ring and a vinyl group, which gives it unique properties and applications.

N-vinylcaprolactam features and applications:

Summary: It is a solid at room temperature, with a melting point of 34 degrees and good adhesion. Due to its unique structure and properties, N-vinylcaprolactam has important application value in fields such as medicine, cosmetics, food packaging, inks, coatings, etc. It can be used for the preparation of biomedical materials, modification of water-based coatings, etc

1. High performance UV ink. Especially in inkjet, it exhibits good curing speed, adhesion, and dilution performance, making it a mainstream UV raw material

2. High performance UV adhesive

Adhesion: Balanced hardness and toughness, exhibiting excellent adhesion on various metal substrates.

Elucibility: At 50 degrees, the viscosity is 2.88mpa. s, with good dilution performance, recommended for UV inkjet UV screen printing ink.

In general, N-vinylcaprolactam produced by Unilong has a unique molecular structure and a variety of application characteristics, which has an important position and broad application prospect in the field of chemical engineering and materials science.

Octadecanethiol is an organic sulfur compound with the chemical formula C18H38S. Octadecanethiol is liquid clear, transparent and oily at temperatures above 35 degrees Celsius, and solid white wax at temperatures below 35 degrees Celsius.

Octadecanethiol is mainly used in electroplating additives, surfactants, etc., as a protective agent for nickel, copper, tin, gold, silver plating, improving salt spray and functionality. The coating layer is uniform and not easy to yellow, the surface washing ability is good, and the corrosion resistance of sulfide is strong. Octadecanethiol is a master of metal protection and has significant effects in protecting metals. When exposed to air, metals are often vulnerable to oxidation, which leads to corrosion. And octadecanethiol is like a “metal bodyguard”, it can form a protective film with the metal surface, blocking oxygen in the air, so as to effectively resist the damage of corrosion. It is like putting a strong suit of armor on the metal to protect it from the claws of corrosion.

Mercaptan is one of the widely used film forming agents in water-soluble gold and silver protective agents. In fact, research on the protection of silver faces dates back to the 1930s. There are two main protection methods adopted at the earliest. One is to use thiazole, imidazole, mertan and other organic substances to react with silver surface to form an organic film, which covers the silver surface to play a protective role. The other is the use of aluminum chloride, lithium chloride and other salts, using their own hydrolysis reaction, the formation of colloids to fill the silver gap, so as to achieve protection. In recent years, through the study of polymer chemistry, the selection of emulsifiers, and the screening of organic membrane components, the performance of silver surface protectants has reached a good effect.

In many experiments, dodecyl mercaptan, tetradecyl mercaptan, hexadecyl mercaptan and octadecanethiol  have been proved to be more effective mercaptan. Among the mature formulations, hexadecylmercaptan and octadecylmercaptan are more commonly used. UNILONG is a professional manufacturer of mercaptan series products such as octadecanethiol, specializing in the research and development and sales of plating brightener intermediates and plating additives, and independently producing silver plating brightener intermediates. In the application of metal environmental protection agent core materials, we have specially prepared special octadecanethiol  and 1-Docosanethiol according to the performance of protective agent film formation, which has shown excellent performance in new energy silver plating anti-vulcanization test and sulfuric acid boiling test.

Die 1-Docosanethiol chemical formula is C22H46S. 1-Docosanethiol is liquid clear, transparent and oily at temperatures above 50 degrees Celsius, and solid white wax at temperatures below 45 degrees Celsius. 1-Docosanethiol can make up for the deficiency of octadecanethiol, the film natural curing fast, good surface washing, strong corrosion resistance. It has good application in coating and mechanical polishing protection of silver jewelry.

Of course, in addition to metal protection can play a vital role, as an important raw material for organic sulfide synthesis, it is also used in industrial production, daily chemical supplies and other fields.

For example, in cosmetics, octadecanethiol can be used as a beauty and skin care ingredient, with multiple effects such as antioxidant, moisturizing and soothing inflammation. At the same time, it is also a natural sunscreen, it has good light absorption properties, can effectively absorb ultraviolet rays, protect the skin from damage. In addition, octadecanethiol can also be used to prepare soft rubber products, so that it has better elasticity and wear resistance.

In addition, as a common organic sulfur compound, octadecanethiol is also widely used in the field of cleaning agents. Due to its strong solubility and decontamination effect, it is widely used in cleaning agents and descaling agents. In industrial production, octadecanethiol cleaners can be used to remove oil stains on machinery and equipment, candle stains and other difficult to clean dirt. In daily life, octadecanethiol cleaners can be used to clean surfaces such as kitchen utensils and bathroom facilities, effectively removing stubborn stains and maintaining cleanliness.

Finally, octadecanethiol is also very important in chemical experiments. Due to its low volatility and extremely low toxicity, it is ideal for many industrial and laboratory applications. In chemical synthesis, octadecanethiol can be used as a solvent to dissolve and catalyze the reaction substance, promote the reaction, accelerate the reaction speed, and improve the efficiency of chemical synthesis. In addition, it can also be used as an extractant to separate and purify organic compounds, thus playing an important role in chemical research and industrial production.

In short, the unique properties of octadecanethiol make it an indispensable and important substance in metal protection, chemical synthesis, industrial production and daily chemical products. With the continuous development of science and technology, we can foresee that the application of octadecanethiol in more fields will continue to expand and deepen.

POLYETHYLENEIMINE (PEI), cas number 9002-98-6, is an important synthetic polymer material with a variety of special properties and a wide range of applications. It is a linear polymer that is synthesized from ethylene imide monomer by polymerization. POLYETHYLENEIMINE has high molecular weight, high branching, abundant amine groups, etc., which makes it have a wide application prospect in the field of electronics, opto-electronics, and aviation.

POLYETHYLENEIMINE is a polymer with good solubility that dissolves in a variety of solvents. It has a high solubility in water and can form a stable colloidal solution with water. This dissolution property makes PEI have good processability and controllability, and can be prepared by solution method, thermoforming, spraying and other methods of different shapes and sizes of materials.

What are the characteristics of POLYETHYLENEIMINE?

1. Waterproof: POLYETHYLENEIMINE has good waterproof performance, which can effectively prevent water penetration and leakage.

2. Heat insulation: POLYETHYLENEIMINE has good heat insulation performance and can effectively prevent the transfer of heat energy.

3. Freshness/POLYETHYLENEIMINE has strong airtight performance, which can effectively maintain the freshness of food and other items and extend the shelf life.

4. Corrosion resistance: POLYETHYLENEIMINE has high corrosion resistance and is able to resist the attack of certain chemicals.

5. High strength: POLYETHYLENEIMINE has high strength and is able to effectively resist pull, pull, squeeze and other forces.

What is the use of POLYETHYLENEIMINE?

1. Electronics.

POLYETHYLENEIMINE is an excellent insulating material with excellent electrical insulation properties and high temperature resistance. Therefore, it is widely used in the insulation layer of electronic components, circuit boards, cables and other fields. In the semiconductor manufacturing process, PEI is also used as a thin film substrate for the manufacture of high-density integrated circuits.

2. Photoelectric field

POLYETHYLENEIMINE has excellent transparency and high temperature resistance, so it is widely used in the field of photoelectricity. For example, it can be used as a substrate material for solar panels, and it can also be used to make LED packaging materials.

3. Aerospace

POLYETHYLENEIMINE has excellent physical properties such as light weight, high strength and high temperature resistance, so it is widely used in the aerospace field. For example, it can be used as thermal insulation material, thermal conductivity material, protective material, etc.

4. Medical field

POLYETHYLENEIMINE has excellent biocompatibility and high temperature resistance, so it is widely used in the medical field. For example, it can be used as medical dressings, surgical instruments, medical packaging materials, etc.

5. Other areas

POLYETHYLENEIMINE can also be used to make materials in hot environments like hot tape, hot cables, hot pipes, etc. In addition, PEI can also be used to manufacture high-strength fibers, high-performance composite materials and so on.

In Zusammenfassung, POLYETHYLENEIMINE is an excellent polymer material that can be used in a wide range of applications. POLYETHYLENEIMINE has the characteristics of water proofing, heat insulation, and freshness, which makes PEI widely used in many fields such as construction, power, chemical industry, and medical treatment. It is believed that with the development of materials science, the role and application field of PEI will continue to expand.

Product name: Instant boron, foliar fertilizer, disodium octaborate tetrahydrate
Chemical formula: Na2B8O13.4H2O
Product boron content: 20%-21%
CAS: 12280-03-4
HS code: 2840190000

High-content disodium octaborate tetrahydrate—-Foliar spray boron fertilizer is a high-efficiency instant boron fertilizer. It is specially designed to speed up the growth of roots, stems, flowers, buds and ears of crops such as rapeseed, cotton, fruits and vegetables, fruit trees, flowers and other crops by spraying boron fertilizer quickly. After use, the above-mentioned crops can increase their stems, flowers and buds, making their fruits and grains fuller. It has a certain effect on physiological diseases caused by boron deficiency and achieves the purpose of increasing yield.

What is the Features of Disodium octaborate tetrahydrate?

1. High content: pure boron content ≥21%, sodium borate content ≥99.9%.
2. Fast dissolution: even at low temperatures, it can quickly dissolve into water or more viscous liquids.
3. Easy to absorb: After application, it can be quickly absorbed and utilized by plant leaves, stems, flowers and fruits, and has obvious top dressing effect on crops.
4. Good mixability: the aqueous solution is close to neutral and can be mixed with most chemical pesticides for application.
5. The yield increase effect is obvious: In areas where the soil is deficient in boron, the application of this product has an obvious yield increase effect and significantly improves crop quality. Low investment, quick results, improved quality, and improved crop stress resistance.
6. Convenient and safe application: it can be quickly dissolved and sprayed at any temperature, and has no residual toxicity to soil and crops.

What is the Application of Disodium octaborate tetrahydrate?

Fertilizer: Plant growth regulator, foliar boron deficiency.
Wood protection: Prevents wood from rotting due to microbial attack.
Fungicides: Fungicides, insecticides, fungus protection.
Water treatment: Water treatment chemicals to make water suitable for drinking.
Soap/Surfactant: Compounds with surface-activating or detergent properties.
Solvent: A liquid mixture that dissolves other substances.
Pheromones: Insect sex attraction hormones used to interfere with mating and selectively kill specific insect species.
Defoliant: Defoliating broad-leaved plants, commonly used to remove leaves before cotton harvest.
Industry: Flame retardant, anti-corrosion, cleaning products.
Disodium octaborate tetrahydrate other applications
Water treatment: Water treatment chemicals to make water suitable for drinking.
Soap/Surfactant: Compounds with surface-activating or detergent properties.
Solvent: A liquid mixture that dissolves other substances.
Pheromones: Insect sex attraction hormones used to interfere with mating and selectively kill specific insect species.
Defoliant: Defoliating broad-leaved plants, commonly used to remove leaves before cotton harvest.
Industry: Flame retardant, anti-corrosion, cleaning products.

Spraying method

Mix 1g of product with 100ml of water to dissolve.
One acre of land uses 45g of product (actually adjusted according to the environment).
Sow seeds three times a year: once for sowing, once for flowering, and once for fruiting.

Packaging method

20kg/bag, plastic inner and outer braid, 5kg/bag, aluminum foil bag

We need to brush our teeth every day, then we need to use toothpaste, toothpaste is a daily necessities that must be used every day, so choose a suitable toothpaste is crucial. There are many kinds of toothpastes on the market with different functions, such as whitening, strengthening teeth and protecting gums, so How to choose the right toothpaste?

Now there are many kinds of toothpaste, usually different toothpaste will have its different effects, in fact, whether it is cheap or expensive toothpaste, the purpose is to help clean teeth, therefore, when we buy toothpaste, do not only look at the price, think that the expensive must be good, expensive out is some additives, such as some anti-allergy, hemostatic, whitening and other ingredients. In fact, the main component of toothpaste is the friction agent, the common friction agent are, calcium hydrogen phosphate, calcium carbonate and calcium pyrophosphate, of which, calcium carbonate friction is relatively strong, generally used to clean teeth of tea and smoke stains.

However, some people like to choose fluoride toothpaste, especially every time the tooth decay tormented sleep. It is an indisputable fact that toothpaste contains a small amount of fluorine, which can play a role in preventing dental caries. So you can use fluoride toothpaste to prevent. When it comes to fluoride toothpaste, the ingredients that have to be mentioned are sodium fluoride and sodium monofluorophosphate.Let me show you the difference between the two.

What is sodium monofluorophosphate？

Sodium monofluorophosphate is an inorganic compound, referred to as MFP, CAS number 10163-15-. MFP has the chemical formula Na2PO3F, is a white crystalline powder, soluble in water. Sodium monofluorophosphate is broken down by acid or salivary enzymes in the mouth, releasing fluoride ions, which react with crystals on the surface of tooth enamel to form fluorapatite, thereby enhancing tooth resistance and inhibiting dental caries. Sodium monofluorophosphate is widely used in food additives, toothpaste, metal cleaners, special glass, skin care cosmetics and other fields, especially in toothpaste, it is used as one of the main components of anti-caries toothpaste. It is generally one of the toothpaste formulations, has basically replaced sodium fluoride in some products, and has gained an advantage in competition with tin fluoride.

Sodium monofluorophosphate is an excellent anti-caries agent and tooth desensitization agent, the conventional content of fluoride in toothpaste is 0.10– 0.12%, but also has a strong bond tooth function, sodium fluoride is an anti-caries agent, mainly used as a fluoride toothpaste additive, the conventional content of fluoride in toothpaste is 0.7– 0.8%, Fluoride in toothpaste can be combined with minerals in the mouth to form fluorapatite, strengthen the protective layer of the tooth surface, high fluoride content, better anti-decay effect, monofluorophosphate compared with sodium fluoride, monofluorophosphate contains more fluorine, so sodium monofluorophosphate anti-decay better.

In fact, sodium fluoride and sodium monofluorophosphate are two different compounds, and they have different chemical structures and application fields.

What is sodium fluoride？

Sodium fluoride (NaF) is an inorganic compound with the formula NaF. Its main applications include as phosphating promoters, agricultural pesticides, sealing materials, preservatives and so on. Sodium fluoride is also used in the medical field to prevent cavities and strengthen teeth, but its role is mainly to provide fluoride, rather than through the mechanism of sodium monofluorophosphate.

In summary, although sodium fluoride and sodium monofluorophosphate overlap in some applications, their mechanisms of action and specific applications are different. Sodium monofluorophosphate has a superior effect in dental care, so it is more commonly used in dental care products such as toothpaste.

At present, there are different toothpastes on the market, the common ones are: fluoride toothpaste, anti-inflammatory toothpaste and anti-allergy toothpaste, you can choose according to your own needs, maintain oral health, as long as you choose the toothpaste on the line. Here I believe that everyone knows how to choose toothpaste.

1,3-Propane sultone (1,3-PS) appears as colorless to light yellow liquid or crystal. The molecular formula is C3H6O3S, the molecular weight is 122.143, the melting point is 30-33℃, the boiling point is 276.5℃, and the relative density is 1.392 , is a toxic, carcinogenic, mutagenic, and teratogenic compound. It is stable under normal temperature and pressure. In the presence of water, this compound will slowly hydrolyze into the corresponding corrosive hydroxysulfonic acid. Heated with potassium hydroxide, it becomes potassium hydroxysulfonate. 1,3-propanesultone is highly reactive and can react with metal alcoholates, phenates, etc. to introduce sulfonic acid groups. No catalyst is required for the reaction with amines. Sulfonic acid groups can be introduced by heating to 130°C with alcohols, phenols, amides, and compounds containing active methylene in the presence of alkaline catalysts. Under atmospheric pressure distillation in the presence of zinc oxide or calcium chloride, furan derivatives are generated. Reacts with triethylamine and other weak acids to form polymers.

In recent years, the production of lithium-ion batteries has grown rapidly and its application areas have continued to expand. According to market surveys, the demand for lithium-ion batteries will reach about 1.35 billion units by 2010. It has become an important factor in the national economy and people’s lives in the 21st century. High-tech products of great significance. 1.3 Propane sultone (PS) is a basic functional additive for preparing lithium ion secondary electrolyte. Its purity directly affects the quality of the electrolyte.

What is the purpose of 1,3-Propane sultone?

1.1,3-Propane sultone is a new functional fine chemical material. It can react with many types of compounds under very mild conditions and accurately provide sulfonic acid groups, thereby giving these compounds new properties. It is an excellent general-purpose sulfonating agent and an important electroplating additive intermediate for the synthesis of PPS, Key raw materials for UPS, DPS, MPS, ZPS, POPS, SP and other products.
2. It is an important pharmaceutical intermediate and is also used in brighteners, dyes, diionic surfactants, sulfonating agents, lithium batteries, etc.
3.1,3-Propane sultone is a commonly used additive in lithium battery electrolyte. It can inhibit the occurrence of side reactions on the electrode surface and the dissolution of metal ions, increase the initial capacity of the battery, improve the high and low temperature storage performance of the battery, increase the number of battery cycles and extend the service life.

Common process routes

Propylene alcohol is used as the starting material and is added with sodium bisulfate to form sodium 3-hydroxypropanesulfonate. After acidification, 3-hydroxypropanesulfonic acid is obtained, and then distilled under reduced pressure and intramolecular dehydration is performed to obtain 1,3-propanesulfonic acid. The synthesis route of lactone is as follows. The synthesis reaction conditions are mild, the raw materials are cheap and easily available, there is no highly toxic or explosive hazard, no pollution to the environment, the process is simple and easy to operate, and the yield can reach 95%.

Market development trend analysis

1,3-propanesultone (PS) is a very important intermediate in organic synthesis. Its derivatives can improve the surface properties of substances and are widely used in the electroplating industry. In the electrolyte of power batteries, it can also be directly used as an additive. Adding it to the non-aqueous solution of lithium-ion batteries can improve cycle life and storage stability.

According to the role of additives in the electrolyte, electrolyte additives can be divided into film-forming additives, flame retardant additives, high and low temperature additives, overcharge protection additives, additives to control the water and HF content in the electrolyte, etc. In recent years, with the continuous expansion of the scale of downstream industries such as lithium battery industry and new energy vehicles and the improvement of safety, cycle life and energy density requirements of lithium batteries, the demand for additives has increased year by year. In 2020, the shipment volume of electrolyte additives in the Chinese market reached 16,140 tons, a year-on-year increase of 40.8%, of which VC shipments were 6,800 tons, FEC shipments were 3,500 tons, 1,3-PS shipments were 2,900 tons, and other types of additives Shipments were 2,940 tons.

There are many kinds of electrolyte additives. There are currently more than 20 varieties in commercial application, but the overall usage is low. Currently, the commonly used electrolyte additives mainly include vinylene carbonate (VC), fluoroethylene carbonate (FEC), Propylene sulfite (PS) and lithium bisoxaloborate (LiBOB), etc. From the perspective of shipments by different categories, VC and FEC have the highest shipments as the most commonly used additives. In 2020, VC shipments were 6,800 tons and FEC shipments were 35 million tons. Together, they accounted for a share of the electrolyte additive market. 63.8%. In addition, new additives including 1,3-PS, LIBOB, DTD, VEC and other new additives have gradually improved battery performance, driving the overall shipment of lithium battery electrolyte additives to increase year by year.

Carbomer is also known as POLYACRYLIC ACID, is a commonly used cosmetic additive, generally need to be added to cosmetics, has a protective effect on the skin, but also can effectively reduce the irritation of the skin, can prevent a variety of allergens to stimulate the skin, after the application on the skin, It can also increase the resistance of the human skin surface, and the resistance to ultraviolet radiation is also relatively good, and it can effectively reduce the ultraviolet radiation to the skin to prevent damage to the skin protective layer, but also to avoid spots on the skin, but also to make the skin more transparent, but also to increase the elasticity of the skin.

Carbomer 940 is a cross-linked acrylic polymer. It is used as a highly effective rheological modifier that provides high viscosity at low dosage with excellent thickening and suspension properties. It is also widely used as a suspension agent in lotions and creams. The water solution neutralized with alkali forms a clear and transparent gel. There are moisturizing, moisturizing, toning and other functions in the product. Makes skin more smooth and lubricated.

Carbomer Features and advantages: short rheology, high viscosity, high resolution, good suspension stability, good temperature stability.

The effect of carbomer on the skin is to protect the skin and reduce irritation. Anti-uv, easily prevent skin from getting tanned. Bactericidal and anti-inflammatory, relieve wounds on the skin and avoid scars. Carbomer is a thickening agent. Enhance the viscosity of skin care products, so that skin care products such as water, milk, will not flow like water. Proper thickeners won’t do harm to our skin.

Characteristics of Carbomer :

1. Reduce stimulation: Carbomer is a kind of polymer, which is the main component of the drug made of eye drops, eye gels and other dosage forms. If carbomer is used on the skin, it usually helps to reduce the irritation of the skin, avoid mucosal damage, and has a certain preventive effect on symptoms such as redness, swelling, and pain.
2. Resistance to ultraviolet radiation: Carbomer has specific activity, which helps to reduce ultraviolet radiation, is conducive to resistance to ultraviolet radiation, reduce ultraviolet stimulation to the skin, and prevent damage to the skin barrier.
3. Anti-inflammatory and bactericidal: Kampo is a natural resin, which is conducive to inhibiting the activity of bacteria, can promote the regression of skin inflammation, and help to improve the skin condition.
4. Protect the skin: It has a certain affinity with the skin, and the addition of skin care products can reduce the irritation and damage to the skin and mucosa, so as to protect the skin.
5. Reduce the viscosity: It can reduce the viscosity, maintain the stability of the effective substances of cosmetics, and make it easier for the skin to absorb.

Carbomer has many effects on the skin, such as moisturizing the skin and hydrating the skin, which can make the skin more smooth.

Carbomer needs to be massaged after being applied to the skin, which can promote absorption and utilization, and should also do a good job of sun protection when going out, try not to be exposed to the sun for a long time, otherwise it will cause normal skin tissue to be damaged.

Sodium thioglycolate is an important flotation inhibitor. It can be used as an inhibitor of copper minerals and pyrite in the flotation of copper and molybdenum ores, which has obvious inhibition effect on copper, sulfur and other minerals, and can effectively improve the grade of molybdenum concentrate. Sodium thioglycolate, as an effective inhibitor of a new type of sulfide ore, has been successfully applied in molybdenum production for many years. It has the advantages of less dosage, simple and convenient usage, better cost saving and economic benefit increase. It not only improves the quality of the product, but also has no pollution and no toxicity, and has completely replaced the highly toxic inhibitor sodium cyanide, which has played a positive role in environmental protection of the production area. This product can also be used as a hair removal agent.

Physikalische und Chemische Eigenschaften

The sodium thioglycolate produced by the company is colorless to red (some slightly darker) transparent liquid, with a purity of 20%, 30%, 45% or more. There is also a white or white crystalline powder with a purity of 98% and excellent quality. With advanced technology and excellent process refined, has been sold to Henan, Shaanxi, Fujian, Liaoning and other places, foreign customers are mainly in Vietnam, India, Indonesia, Turkey, Brazil, Peru, the United States and other countries.

Preparation method

1. Add a certain amount of water to a 1000mL beaker, add solid soda ash at room temperature, stir for 30 minutes to fully dissolve it, and then add chloroacetic acid for neutralization. The neutralization reaction of chloroacetic acid is exothermic, accompanied by the release of a large amount of carbon dioxide gas, the reaction is relatively drastic, in order to control the temperature of the neutralization reaction (the temperature is too high, the temperature is too high, the temperature is too high, the temperature is too high. Chloroacetic acid will undergo hydrolysis reaction to produce hydroxyl carboxylic acid) and prevent foam overflow during the reaction, the addition rate of chloroacetic acid is slow, and its dosage depends on the pH value of the solution; After the solution becomes clear, pour it into a three-port flask and put it into an electric heating water bath for heating reaction. When it reaches a certain temperature, add sodium thiosulfate crystal, stir and heat up to 85℃, and react at this temperature for 40 minutes to obtain salt. After the temperature continues to rise to 95℃, the strong alkali thioglycolating agent solution is added, the reaction is about 40min, the heating and stirring are stopped, the natural cooling is done, and the transparent sodium thioglycolate product can be obtained after purification.
2. Add 185g sodium chloroacetate,29g isopropyl xanthoxanthate and appropriate amount of water into a 500ml four-mouth flask, react at 75℃ for 2h, then drop to room temperature, and slowly add 5% excess monoethylamine into the four-mouth flask with stirring. After the addition, the temperature is raised to 70℃ and the lh is kept warm. At this time, the reaction system changes from transparent to yellow cloudy, and finally becomes brown cloudy liquid. Stop stirring, stand stratification, the upper layer is yellow transparent liquid, which is ethylthiamine vinegar, said the mass is 77.1g, the purity is greater than 96%, the isopropyl alcohol mass fraction is less than 3.0%; The lower layer is dark red alkaline waste liquid, containing sodium leucyl acetate, sodium chloride, etc., which can be directly used as flotation agents.

Anwendung

1. Application in the separation of copper and lead Sodium thioglycolate, as a non-toxic, small molecule inhibitor, has a good inhibition effect on chalcopyrite, and can be applied in the separation process of copper-lead mixed concentrate to achieve the separation of copper and lead. Factors such as the dedrug effect, the type and dosage of the collector, the pulp p and H value, and the amount of sodium thioglycolate during separation have important effects on the separation effect of copper and lead, but the amount of sodium thioglycolate is the most important influencing factor. When the amount is appropriate, the separation of copper and lead can be better achieved. When the amount is too large, sodium thioglycolate can inhibit both of them. Inhibition mechanism: The infrared spectral curves of sodium thioglycolate after the interaction with chalcopyrite and galena were bifurcated. After washing, the absorption valley of these characteristic groups became weak but did not disappear completely, which proved that sodium thioglycolate coexisted with physical adsorption and chemisorption on chalcopyrite and galena surface.

2. Activated sphalerite with copper sulfate in high pH slurry, lime as an inhibitor of pyrrhotite and pyrite, supplemented by sodium thioglycolate, can effectively achieve zinc-sulfur separation, industrial production test obtained grade 45.10% zinc concentrate, operation recovery of 94.39%. Sodium thioglycoacetate is a medium toxic agent, which has a good inhibition effect on pyrite and pyrrhotite, and can completely replace highly toxic cyanide to achieve cyanide-free separation process of zinc and sulfur, which not only ensures the production index of zinc concentrate grade and recovery rate, but also can meet the national environmental protection requirements. Sodium thioglycolate has little inhibitory effect on sphalerite, and has maintained good production index since the use of sodium thioglycolate.

At present, according to the needs of customers, we have opened a new production line, all using high-purity imported raw materials production, sodium thioglycolate widely used in hair removal (such as leather, human body), hair ironing and dyeing agent, solid and liquid media preparation.

What is Sodium Monofluorophosphate？

Natriummonofluorphosphat is referred to as “SMFP” is a chemical substance, CAS 10163-15-2 white powder or white crystal, easily soluble in water, strong hygroscopic, at 25 degrees water dissolution is no side effects and no corrosion. Sodium monofluorophosphate contained in toothpaste is an excellent anti-caries agent and tooth desensitization agent. The conventional content of Sodium Monofluorophosphate in toothpaste is 0.7-0.8%, and the conventional content of fluorine in drinking water is 1.0mg/L. Sodium monofluorophosphate in aqueous solution has obvious bactericidal effect, and has obvious inhibitory effect on melanomycin, staphylococcus aureus, salmonella and so on. Sodium monofluorophosphate is widely used in toothpaste additives, concrete corrosion inhibitors, food, medical and other aspects.

Is sodium monofluorophosphate good for your teeth?

Sodium Monofluorophosphate is an inorganic compound used in toothpaste to prevent tooth decay and improve tooth sensitivity. The specific analysis is as follows:

Sodium Monofluorophosphate is widely used in fluoride toothpastes, which can promote tooth remineralization and prevent tooth decay. It has a good effect on people with sensitive teeth and will not irritate teeth after use. However, sodium monofluorophosphate has a certain toxicity, the content of sodium monofluorophosphate in toothpaste is 0.7%-0.8%, and generally a small amount of ingestion will not have any effect. If swallowed for a long time, it may lead to fluorosis, and may also cause tooth deformity, softening, loss of luster, etc., resulting in dental hypoplasia.

What are the risks of sodium monofluorophosphate?

Fluorine exists widely in nature and is one of the essential trace elements for human body, mainly accumulated in teeth and bones. Proper fluoride is necessary for the human body to maintain the normal development and calcification of teeth. The discovery that fluoride can prevent dental caries is arguably one of the greatest contributions of preventive oral medicine to mankind in the 20th century.

In short, fluoride ions can inhibit tooth demineralization, promote tooth mineralization, and enhance tooth resistance to acid; Fluoride also reduces the incidence of dental caries by affecting the metabolic activity of caries-causing bacteria. Therefore, moderate use of fluoride can effectively prevent tooth decay, which is the result of hundreds of clinical studies over decades. The commonly used fluoride in the mouth is sodium fluoride, sodium monofluorophosphate, stannous fluoride, etc., such as fluoride toothpaste, fluoride mouthwash, fluoride foam, etc.

The easiest and most common way to protect your teeth with fluoride is to brush your teeth twice a day with fluoride toothpaste. Many domestic and foreign authorities, such as the World Health Organization (WHO), the Chinese Dental Association have affirmed the role of fluoride toothpaste to prevent dental caries, but also clearly pointed out the safety and effectiveness of fluoride toothpaste.

What is the function of sodium monofluorophosphate?

Sodium Monofluorophosphate is widely used as toothpaste additive, concrete corrosion inhibitor, food, medical and so on.

1. Application in toothpaste

SMFP is the most widely used toothpaste additive in the world, and is an excellent anti-caries agent and tooth desensitization agent, with a mass fraction of 0.7% to 0.8% in toothpaste. There are two main categories according to the ingredients: care toothpaste and biological toothpaste.

Nursing toothpaste: nursing toothpaste has the functions of preventing caries, desensitizing, anti-inflammatory and preventing tooth stones, etc. The grass coral total effect nursing toothpaste developed has this multi-effect function. The most important thing for the effective prevention and treatment of dental and periodontal diseases is to eliminate bacteria harmful to dental health in the mouth, and herbal extracts have been widely recognized in preventing and eliminating general inflammation of the gum and oral mucosa. The fluoride in Grass coral Total effect care toothpaste has the function of antibacterial and bactericidal. According to relevant studies, low concentration of fluoride ions (0.8% sodium monofluorophosphate in grass coral) has a better antibacterial effect. Fluoride is used as an additive to prevent caries. It not only has a health care effect on acid-resistant desensitization of teeth, but also acts with tooth enamel to form fluorapatite on the surface of tooth enamel, which improves the hardness of tooth enamel.

2) Biological toothpaste: Biological toothpaste is the addition of toothpaste to the biological body has a specific active function of the substance, the current biological toothpaste mainly contains enzyme preparations, antibody preparations and other biological active preparations. The toothpaste containing enzyme preparation mainly contains protease and glucanase. Proteolytic enzyme toothpaste can promote the rapid hydrolysis and break of the long chain of protein polypeptides, make the food residue attached to the tooth surface soft, easy to clean the mouth, and has the function of softening blood vessels, can make the inflammation and edema of the gum subside, and the phenomenon of tooth bleeding has been significantly improved or eliminated.

Glucanase helps remove tartar. Toothpaste containing antibody preparation is generally divided into: toothpaste containing milk antibody and toothpaste containing genetically modified preparation. Milk antibody toothpaste is to extract antibodies from milk, and it is added to the toothpaste to fight against a certain disease. The toothpaste containing transgenic antibody preparation is to add the product of human oral disease vaccine gene in the transgenic horse bell tuber into the toothpaste, which can produce the corresponding effect of preventing oral diseases. The fluorine in sodium monofluorophosphate is stable, and the fluorine in one year is maintained at 84.4%, which effectively ensures the caries prevention effect. Its pH value is 5.5 ~ 6.5, which is neutral. And good compatibility with abrasives, these advantages determine that sodium monofluorophosphate is very suitable for toothpaste additives, has been in mass production in China. The anti-caries effect of fluoride toothpaste was observed in Beijing Stomatology Science Center for two and a half years, and the caries decreased by 42.95%.

2. Application in food

1) SMFP used as a food additive: From long-term clinical trials, it is known that sodium monofluorophosphate is better than other common fluoride raw materials (such as sodium fluoride) as a source of fluorine. Sodium monofluorophosphate can be used as a food additive to increase food nutrition, but if it exceeds the standard, it is unsafe. Sodium monofluorophosphate is added to foods, and 0.25 to 5mg of fluorine can be added every day, which is equivalent to the intake of 2.5 to 16mg sodium monofluorophosphate. According to the data, it is not safe to consume sodium fluoride (1.7 to 14mg) and phosphate (1.1 to 8.8mg) every day. In Europe, the amount of additives in food is generally below the maximum limit. For adults, eating 2mg of fluorine-containing food per day will not exceed the standard. Therefore, we should pay attention to the safety of sodium monofluorophosphate while enhancing the nutritional value of food.

2) SMFP used as chewing gum material: Chewing gum has always been favored by the public. But the current chewing gum does not have caries prevention, desensitization, bacteriostasis, anti-cold and other health functions. Although the average medicated toothpaste has one or more effects, it cannot replace the chewing function and taste of chewing gum. In 1998, Li Guohua developed a chewing gum with multiple effects, which added 0.5% sodium monofluorophosphate, so it has a good anti-caries effect.

3. Medical applications

1) SMFP used to regulate menopause: female lipid and lipoprotein metabolism Sodium monofluorophosphate can be used to regulate lipid and lipoprotein metabolism in postmenopausal women.

2) SMFP used to increase bone mass and alleviate osteoporosis: Sodium monofluorophosphate promotes osteoblast differentiation and diffusion while promoting bone mass increase, which is caused by fluorine inhibiting growth factors in acid phosphatase. MFP can perform its function through other signaling mechanisms. Although sodium fluoride also has the function of increasing bone mass, MFP increases bone mass more when consuming equal amounts of MFP and NaF. Sodium monofluorophosphate can increase bone mass and relieve osteoporosis, but it does not change the mineralization of bone tissue.

4. Used as a corrosion inhibitor:

When steel bars corrode, a series of protection and repair methods can strengthen the structure of concrete, and corrosion inhibitors are the most attractive alternatives. MFP as a rust inhibitor can slow down the corrosion of rebar.

Methylcyclopentadienyl manganese tricarbonyl, abbreviated as MMT, has been widely used in the world’s oil refining enterprises mainly as a good antiknock agent for gasoline since its advent. MMT, decomposed into active manganese oxide particles under combustion conditions, due to its surface effect,(destroy the peroxides already generated in the automobile engine, resulting in a reduction in the concentration of peroxides in the pre-flame reaction, while selectively interrupting a part of the chain reaction, thereby preventing automatic ignition, reducing the speed of energy release, so that the antiknock of the fuel is improved.

MMT performance characteristics:

Improve vehicle power and reduce fuel consumption.

MMT has good compatibility with oxygen-containing components, MMT has good compatibility with MTBE and ethanol in improving octane number.

Improve refining operations:

1. Reduce the severity of the operation of the reforming device.
2. Reduce the aromatics content in gasoline.
3. Reduce the olefin content in gasoline.
4. Reduce the demand for crude oil.

To increase the flexibility of oil blending, various specifications of gasoline products can be blended by rational use of MMT, MTBE, reformed gasoline, catalytic gasoline and straight-run gasoline.

MMT advantages

With MTBE, ethanol in the improvement of octane number has a good admixture, can meet the higher octane number, but also can avoid excessive use

MTBE reduces the dynamic performance of vehicles.

It can reduce the emission of pollutants in the automobile exhaust, and the CO and NOx in the engine exhaust have a certain degree of decline;

Burning gasoline containing MMT can remove phosphorus and reduce sediment on the catalyst, which can extend the life of the catalyst and keep the catalyst alive

To reduce pollutant emissions more effectively;

Improve refining operation, increase the flexibility of oil blending, and reduce the rigor of reforming unit operation.

MMT uses:

1. MMT can be used as gasoline anti-riot agent, gasoline magnifying agent, unleaded gasoline antiknock agent, gasoline octane number improver, magnifying agent, eutrophic agent, magnesium metal compound.
2. MMT is flammable and highly toxic, decomposing toxic manganese oxide fumes in the fire.
3. MMT was originally used as a supplement to leaded gasoline and later to increase the octane number of unleaded gasoline.
4. MMT synthesis process is simple, has good explosion-proof performance, easy to remove combustion deposits, does not block the exhaust gas catalytic purifier, low toxicity, high environmental safety, can replace tetraethyl lead as an antiknock agent.

1-Decanolauch bekannt als C10 Alkohol, cas-Nummer 112-30-1 erscheint als eine farblose, Viskose Flüssigkeit. Leicht löslich in Wasser, mit einer Löslichkeit von 2,8 gew. -%. Löslich in Essigsäure, ethanol, Benzol, Petrolether, leicht löslich in ether. N-decanol kann verwendet werden, um die Seife zu machen und die Essenz der täglichen Kosmetik. Es spielt eine wichtige Rolle bei der C8-C18-Alkohole, und ist verwendet in rose floral essence. Wie ein citrus-Essenz, es ist verwendet in Getränke, Süßigkeiten, etc. Es ist auch ein Rohstoff für die Herstellung von Tensiden, Weichmachern, synthetischen Fasern, Entschäumer, Herbizide, Schmierstoff-Additiven, und Gewürze, und ist verwendet als Lösungsmittel für Druckfarben und andere Produkte.

Was ist die richtige Methode zur Herstellung von 1-decanol?

Es gibt zwei Methoden für die Herstellung von 1-decanol. Man ist zu reduzieren die Fettsäuren der Kokosnuss öl, während das Natürliche Produkt wird aus Kokosnuss-öl als Rohstoff, der Hydriert wird bei hoher Temperatur und hohem Druck in Gegenwart von gemischten Oxiden. Die geradzahligen Kohlenstoffatomen gemischte Alkohole (einschließlich low-carbon Alkoholen zu octadecanol), gewonnen aus der Reaktion ausgesetzt sind Vakuum-Destillation. Die C8-C12-Fraktion wird verfeinert, indem Borsäure Veresterung Methode, hydrolysiert und dann einer Destillation im Vakuum. Es kann auch erhalten werden, indem carbonylation reaction von nonan zu produzieren, nonanal, das ist dann reduziert auf nonanol und destilliertes für die Verfeinerung. Es kann auch erhalten werden aus Ethylen durch kontrollierte Polymerisation, gefolgt von der Hydrolyse und der Trennung. Natürliche Präsenz: gefunden in süße orange öl, Orangenblüten-öl, apricot blossom, öl und Sonnenblumen-öl.

Was ist die Verwendung von 1-decanol?

1-decanol wird hauptsächlich verwendet, um vorzubereiten, die Essenz von orange, Zitrone, Kokosnuss und verschiedene Früchte. Das Land sieht vor, dass Gewürze dürfen verwendet werden.

1-decanol als Rohstoffe für die Herstellung von Tensiden, Weichmachern, synthetischen Fasern, Entschäumer, Herbizide, Schmierstoff-Additiven, und Gewürze, sowie als Lösungsmittel für Druckfarben und andere Produkte.

Trace-Menge ist verwendet in die Formulierung von Wesen wie Akazie, osmanthus, violet, rot, rose, orange Blume, narzisse, iris, Flieder, Jasmin und süßer orange Blume. Es kann verwendet werden als eine Mischung agent oder Modifikator von linalool in low-grade floral Formel. Manchmal verwendet für industrielle Desodorierung oder Maske, die den unangenehmen Geruch von industriellen Produkten. In den essbaren Wesen, es kann auch verwendet werden in eine kleine Menge in cream, sweet orange, coconut, lemon und eine Vielzahl von Obst Aromen.

1-Decanol kann auch verwendet werden, um die Seife zu machen und das wesentliche für die tägliche Kosmetik. Es spielt eine wichtige Rolle bei der C8-C18-Alkohole, und ist verwendet in rose floral essence. Wie ein citrus-Essenz, es ist verwendet in Getränke, Süßigkeiten, etc. Die Dosierung (ppm) in Essen ist wie folgt: Eis 4.6, candy 5.2, Kaugummi 3.0, Getränke 2.1. Verwenden Sie nicht für andere Zwecke als Duft.

1-Decanol ist auch ein Rohstoff für die PVC-Draht-Beschichtung Material und Weichmachern (DIDP DIDA) für high-grade synthetische Leder, wie auch als Rohstoff für Uran Raffination, Entschäumer, Tenside und Lösungsmittel. In Landwirtschaft, es kann verwendet werden als Lösungsmittel und STABILISATOR für Herbizide, Insektizide und synthetische Rohstoffe. Als eine Reifen-agent für grüne Früchte, es kann auch verwendet werden für die Steuerung Keimung der Samen in Zierpflanzen und Tabak. Es kann auch verwendet werden in öl bohren und sekundäre ölgewinnung.

4-ISOPROPYL-3-METHYLPHENOL, abgekürzt als IPMP, kann auch aufgerufen werden, o-Cymen-5-ol/3-Methyl-4-isopropyrphenol. Die molekulare Formel ist C10H14O, die molekulare Gewicht ist 150.22, und die CAS-Nummer ist 3228-02-2 IPMP ist ein weißer Kristall, unlöslich in Wasser und löslich in organischen Lösungsmitteln. Es hat eine Löslichkeit von 36% in ethanol, 65% in methanol, 50% in isopropanol, 32% in n-butanol, und 65% in Aceton. Es ist weit verbreitet in der Kosmetik Industrie, und können spielen eine Rolle in anti-Korrosion und Sterilisation.

3-methyl-4-isopropyl-phenol ist ein isomer von thymol (eine Anlage, in der cheilaceae Familie ist ein großer Bestandteil von ätherischen ölen) und wurde verwendet in folk Medizin für Jahrhunderte. In den letzten Jahren, die Industrie-Rohstoff für die Herstellung von 3-methyl-4-isopropyl-phenol wurde weiter verbessert, und es ist jetzt weit verbreitet in der Allgemeinen Medizin, quasi-Medizin -, Kosmetik-und anderen chemischen Bereichen.
Was sind die Merkmale IPMP?
1.IPMP ist fast geschmacklos, und seine milde Adstringenz ist geeignet für Kosmetik.
2.IPMP ist fast nicht reizend, die Haut Allergie-rate ist 2%.
3.IPMP-Funktionen gleich auf Bakterien, Hefen, Schimmelpilze und einige virale Spezies.
4.IPMP zeigt, oxidation Widerstand in den Prozess der Absorption von UV-Licht mit einer Wellenlänge von 250-300 Nm (Hauptgipfel 279nm).
5.IPMP hat starke Stabilität in Bezug auf Luft, Licht, Temperatur und Feuchtigkeit, und können platziert werden für eine lange Zeit.
6.IPMP ist sehr sicher für die Synthese von Medikamenten, Kosmetika und non-Pharma-Produkte.
o-Cymen-5-ol hat gezeigt, sehr starke bakterizide und antimikrobielle Vorteile gegen parasitäre Mikroorganismen in der pharmakologischen und klinischen Studien, wie trichophyton dermatis. Vorteile für die influenza-Viren haben auch gezeigt (200mmp).
4-ISOPROPYL-3-METHYLPHENOL kann hemmen die oxidation und den Abbau von synthetischen Materialien. Dieser Vorteil ist auch im Zusammenhang mit antibakterieller Wirkung, und können spielen eine hervorragende Rolle in den Erhalt der Qualität von Kosmetik, die leicht abgebaut durch oxidation, wie fettige Substanzen, Fette, Vitamine, Duftstoffe und Hormone. In den Prozess der Erprobung der antioxidativen Funktion von 3-methyl-4-isopropyl-phenol, 50 G festes paraffin mit einem Gehalt standard 0.01%-0.04% wurde Hinzugefügt, und siedete bei 160℃ mit Sauerstoff für die 21 Stunden, bis sich das Peroxid-content-erreicht 50 (Induktion Zeit: Anzeige Verfärbung der Zeit). Es wurde festgestellt, dass die Wahrscheinlichkeit, 3-methyl-4-isopropyl-phenol Verzögerung der oxidation mal für 3 Stunden war die 0.01%, die für 9 Stunden war 0.04%.

Was Ist Die Verwendung Von 4-ISOPROPYL-3-METHYLPHENOL?
Kosmetik:
4-ISOPROPYL-3-METHYLPHENOL kann verwendet werden als Konservierungsmittel in Gesicht Cremes, Lippenstifte und Haarpflege-Produkte.
Drogen:
4-ISOPROPYL-3-METHYLPHENOL kann verwendet werden, um hemmen Haut Krankheiten verursacht durch Bakterien oder Pilze, die Desinfektion des Mund und desinfizieren den anus.
Quasi-Drogen:
4-ISOPROPYL-3-METHYLPHENOL kann verwendet werden in externen Sterilisatoren und Desinfektionsmittel (inklusive hand-Desinfektionsmittel), orale Desinfektionsmittel, hair tonics, zart Medikamente, Zahnpasta, etc.
Industriellen Einsatz:
4-ISOPROPYL-3-METHYLPHENOL kann verwendet werden für Klimaanlage und Raum-Desinfektion, - Gewebe-antibakterielle und desodorierende Verarbeitung, verschiedene antibakterielle und antimykotische Behandlungen und andere Desinfektion.
1. Indoor-Desinfektionsmittel: Sprühen einer Lösung mit 0,1-1% auf den Boden und die Wände können spielen eine effektive Rolle in Desinfektion (für den Ziel-Mikroorganismen, verdünnen Sie die vorbereitete emulsion oder isopropyl-Alkohol-Lösung geeigneter Konzentration).
2. Kann verwendet werden für Kleidung, innen-Dekoration und Möbel-Desinfektion durch sprühen oder Imprägnierung von gewebte Kleidung, Bettwäsche, Teppiche und Vorhänge und andere Gegenstände kann spielen eine ausgezeichnete antibakterielle, desodorierende Wirkung.
Bei der 3-methyl-4-isopropyl-phenol ist in Kombination mit nicht-Ionischen Tensiden oder makromolekularen verbindungen, wie CMC, seine bakterizide Aktivität kann reduziert werden, da es angeschlossen ist oder adsorbiert auf die Tensid-bundle. Zur Verbesserung der Wirkung von Anionen-Oberfläche Aktivität, EDTA2Na oder einen Ersatz agent erforderlich ist.
Wir sind ein professioneller Hersteller von IPMP, wenn Sie irgendwelche Anforderungen haben, Sie können Kontaktieren Sie uns direkt.

Viele Verbraucher sehen, dass einige Kosmetika enthalten "polyglyceryl-4 laurate" diese Chemische Substanz, die nicht wissen, die Wirksamkeit und Wirkung dieser Substanz, die wissen wollen, ob das Produkt, polyglyceryl-4 laurate ist gut. In diesem Papier, das Funktion und Wirkung der polyglyceryl-4 laurate auf die Haut eingeführt wurden.

Polyglyceryl-4 laurate in der Kosmetik, Hautpflege-Produkte in der Hauptrolle ist ein Emulgator, der die Risiko-Koeffizienten 1 ist, relativ sicher, können sicher sein, zu verwenden, in der Regel keine Auswirkungen auf schwangere Frauen, polyglyceryl-4 laurate Haut empfindliche Verbraucher mehr Aufmerksamkeit schenken.

POLYGLYCERYL-4 LAURATE hat ausgezeichnete solubilization, emulgieren, dispersion, Schmier-Fähigkeit. Es reizt die Haut und die Augen. Als Emulgator, Weichmacher, etc., verwendet im Bereich der Körperpflege-Produkte. Akne verursachen können, in großen Mengen verwendet werden, kann auch Reizungen. Laurinsäure Inhaltsstoffe haben eine starke Fähigkeit, Fett zu entfernen, und oft die Zusammensetzung ist in der Regel alkalisch (Schwächung Hautwiderstand), die in der langfristigen dünne Haut, Rinde, verringert die Verteidigung und verursachte Infektion.

Polyglycerol fatty acid esters: Hauptsächlich verwendet als öl-Bohr-Schmiermittel (polyglycerin oleate) Schmieröl anti-tragen agent (polyglycerin ricinoleate), nationale sechs diesel-spezielle anti-Verschleiß-agent (polyglycerin ricinoleate), Kunststoff film, anti-fogging agent (polyglycerin-Stearat), können auch verwendet werden in die Wasch-Industrie (polyglycerin Feuchthaltemittel) - STABILISATOR, kann auch verwendet werden als Dispergiermittel in die Lebensmittel Additiv Industrie; Verdickungsmittel; Entschäumer; Qualität Verbesserer; Es ist eine Art von nicht-Ionische Ordnung von Erdöl, Chemische Produkte, die ist relativ grün, umweltfreundlich und leicht biologisch abbaubar. Polyglycerol fatty acid ester wurde hergestellt durch Veresterung von Fettsäuren mit Glycerin synthetisiert aus Erdöl als Rohstoff.

Funktionen :1. Sowohl hydrophile und lipophile, es hat eine gewisse Emulgierung und dispersion Effekt auf öl und bilden einen zarten und stabilen Schaum; Natürliche pflanzliche Quelle, frei von PEG, grün und sicher. Es hat eine gewisse antibakterielle Eigenschaften, und hat starken Widerstand zu Bakterien, Schimmel und Hefe. In verwenden, es können ersetzen Natriumbenzoat und Kaliumsorbat als Konservierungsmittel, so dass das Produkt natürlich und gesund. In der Kosmetik verwendet, die Produkt hat hervorragende Haut Affinität, effektiv halten die Haut mit Feuchtigkeit, lösen trockene, empfindliche Haut Probleme, und zur gleichen Zeit, hat eine gute dispersion, Emulgierung und Stabilität. Es kann verbessern die textur und den Geschmack der Rezeptur, und verlängern die Haltbarkeit der Produkt. Es kann auch verwendet werden als Verdickungsmittel und Weichspüler in Sonnencremes und lip Moisturizer. Starke Kompatibilität, geeignet für alle Arten von Systemen, Mit proprietären Entfärbung und Geschmack removal Technologie, die Produkt Qualität ist besser und die Leistung ist stabil. So polyglyceryl-4 laurate, ist sicher für die Haut.

Anwendung: Hohe Effizienz Emulgator, Dispergiermittel, STABILISATOR, grün und sicher, kann verwendet werden in Lebensmitteln und Futtermitteln Emulgierung und anti-Korrosion, kann auch verwendet werden in Gesichts Reiniger, make-up-Entferner, make-up Entferner Creme, Sonnencreme und anderen Kosmetika. In Industrie, es kann verwendet werden als Kunststoff-Antifog agent-und pigment-Dispergiermittel.

Lagerung: Dieses Produkt ist eine nicht-gefährliche Chemische. Das Produkt hat eine gewisse Feuchtigkeit absorption, und sollte versiegelt und gespeichert in einem trockenen, kühlen und gut belüfteten Ort bei niedriger Temperatur. Polyglycerol-4 laurate verboten ist die Lagerung und der transport mit giftigen und schädlichen Substanzen. Rod seal storage Zeitraum von 24 Monaten. Verpackung: Barrel (25kg/ barrel).

N-[3-(dimethylamino)propyl]oleamid ist eine gemeinsame Chemische verwendet in eine Breite Palette von Anwendungen. Es ist eine organische Verbindung, gewonnen aus Kokos-öl und hat eine Vielzahl von Funktionen und nutzt.

N-[3-(dimethylamino)propyl]oleamid ist chemisch synthetisiert aus hohe Qualität und hohe Reinheit verfeinert, roh, alias: oleamidopropyl dimethylamine, N-dimethylaminopropyl cocamidoamide, cocamidopropyl dimethyl tertiary amine; Cocamyl propyl-dimethyl tertiary amine, etc.

N-[3-(dimethylamino)propyl]oleamid ist ein Zwischenprodukt für die Herstellung von Amin-Salze, oxide Amine, Betain und quartäre Ammoniumsalze. Es kann verwendet werden als Weichmacher, Emulgator, Schaummittel, conditioner, softener, etc. Es kann verwendet werden in Bad Produkte, conditioner, skin care Agents, shampoo, Chemische Synthese, Schmieröl, Schneidöl und so auf. Es ist auch eine sehr gute flotation agent für Quarz sand, und die effektivste asphalt Emulgator. Es kann auch verwendet werden als hydrophobierungsmittel für Papier -, Korrosions-und Additive für Erdölprodukte.

Was ist oleamidopropyl dimethylamine verwendet?

Erste, N-[3-(dimethylamino)propyl]oleamid ist weit verbreitet in Körperpflege Produkte. Aufgrund seiner guten Durchlässigkeit und feuchtigkeitsspendende Eigenschaften, es ist Hinzugefügt, um viele shampoos, Conditioner und Hautpflege-Produkte, die als Wirkstoff. N-[3-(dimethylamino)propyl]oleamid tief befeuchtet Haut und Haare, verbessert Ihre Geschmeidigkeit und Glanz und reduziert die Trockenheit und die UV-Schäden an Haut und Haar. Zusätzlich, es hat auch antistatische und antioxidativen Funktionen, die kann effektiv verhindern statische Elektrizität generation und die oxidative Schädigung von Haut und Haar.

Zweitens, Oleamidopropyl dimethylamine hat auch wichtige Anwendungen in Wasch-und Reinigungsmitteln. Aufgrund seiner guten oberflächenaktiven Eigenschaften, es kann effektiv entfernen Sie Fett und Schmutz und kann bilden eine stabile emulgieren system während der Reinigung. Für diese Grund, Oleamidopropyl dimethylamine ist oft verwendet als Wirkstoff in Wasch -, Wasch-und Spülmittel. In diese Reinigung Produkte, es ist in der Lage, schnell zu zerstreuen, Schmutz und suspendieren in Wasser, damit die Verbesserung der Reinigung Wirkung.

Darüber hinaus oleamidopropyl dimethylamine hat auch bestimmte antibakterielle und antiseptische Wirkung. In bestimmten pharmazeutischen Produkten, es ist verwendet als Konservierungsmittel zur Verlängerung der Haltbarkeit des Produktes und die Aufrechterhaltung seiner Stabilität. Zur gleichen Zeit, oleamidopropyl dimethylamine kann auch hemmen das Wachstum von Bakterien und Pilzen und spielen eine gewisse antibakterielle Rolle. Daher, cocamidopropyl dimethylamine, kann auch gefunden werden in einigen Desinfektionsmitteln und Hautpflege-Produkte.

Zusätzlich zu den oben genannten Anwendungen, N-[3-(dimethylamino)propyl]oleamid ist auch weit verbreitet in Textil Verarbeitung, Farbstoffen und Tinten. Zum Beispiel in der Textilverarbeitung, es kann verwendet werden als anti-Falten-agent-und Schmiermittel zur Verbesserung der Haptik und Weichheit der Textilien. In Farbstoffen und Tinten, es kann verbessern die dispersion und Stabilität der Pigmente und verbessern die Wirkung von färben und drucken.

In Zusammenfassung, N-[3-(dimethylamino)propyl]oleamidals multifunktionale Chemische, hat eine Breite Anwendung Aussichten. Ob es ist persönliche Pflege -, Reinigungs-oder anderen Bereichen, es spielt eine wichtige Rolle. In der Zukunft, mit dem Fortschritt von Wissenschaft und Technologie und das Wachstum der Nachfrage, es wird angenommen, dass die Anwendung Palette von cocamidopropyl dimethylamine weiter auszubauen, bringt mehr Komfort und Komfort zu Leben der Menschen.

Glyoxylsäureauch bekannt als glycinic Säure-oder Kasein, ist eine verbreitete organische Säure, leicht zerlegt in Ameisensäure und ethanol, kann weit verbreitet in Lebensmittel, Pharma, Kosmetik und anderen Bereichen. Jedoch, das Geheimnis der Glyoxylsäure ist weit mehr als das, es verbirgt sich auch viele unbekannte Magische Eigenschaften.
Chemische Eigenschaften von Glyoxylsäure
Glyoxylsäure ist, bestehend aus einem methyl-carbonyl-Gruppe und einem hydroxyl-Säure-Gruppe, und hat eine sehr starke Hydrophilie. Glyoxylsäure distanziert er natürlich in Wasser eine Säure bilden ion und ein proton mit der Formel CH3COO- + H+.

Darüber hinaus Glyoxylsäure können Hinzugefügt werden, um andere Gruppen unter geeigneten Bedingungen bilden verbindungen mit spezifischen biologischen Aktivitäten, wie Veresterung, kondensation, Alkylierung, etc., das ist einer der Gründe, warum Glyoxylsäure ist weit verbreitet.
Anwendung von Glyoxylsäure in verschiedenen Bereichen
1. Lebensmittel-Bereich
Glyoxylsäure ist eine Art von Säure-agent-weit verbreitet in Lebensmittel Bereich, die können verwendet werden für Gewürze und Qualität Schutz von Lebensmitteln wie Gewürze, Dosen, Getränke und Milchprodukte.
Zur gleichen Zeit, Glyoxylsäure hat auch antibakterielle und bakteriostatische Effekte, die können verlangsamen das Wachstum von Bakterien in Lebensmitteln und pflegen Sie den frischen Geschmack von Lebensmitteln. In den letzten Jahren die Anwendung von Glyoxylsäure hat sich mehr und mehr diversifiziert, wie die für die Ernährung Enhancer, Gesundheit Produkte, biologische Präparate und so weiter.
2. Pharmazeutischen Bereich
Glyoxylsäure oder seine Derivate sind weit verbreitet in pharmazeutischen Bereich, wie Veresterung zu produzieren entzündungshemmende Inhaltsstoffe in sterile Augentropfen, Husten-Medikamente, orale Medikamente, Injektionen, Desinfektionsmittel, etc.
3. Kosmetik
In der Kosmetik, Glyoxylsäure kann nicht nur verwendet werden als Reinigung regulator, aber auch hat die Funktion der Regulierung des Haut-pH-Wert, antibakterielle, feuchtigkeitsspendende und öl-control. In addition, Glyoxylsäure kann auch verwendet werden, um Flecken zu entfernen, Akne und Häutchen, die Förderung der Haut der Erneuerung.
Glyoxylsäure findet Anwendung in der Körperpflege als Neutralisationsmittel, es ist weit verbreitet in Haar Richt insbesondere Produkte (shampoos, Conditioner, Lotionen, Cremes) bei Konzentrationen von 0,5-10%. Glyoxylsäure oder oxoacetic Säure ist eine organische Verbindung, die sowohl eine aldehyd-und eine Carbonsäure.
4. Feld der biologischen Wissenschaften
Glyoxylsäure hat eine Breite Palette von Anwendungen in den life sciences, wie DNA/RNA-Extraktion, protein-Modifizierung und Kristallisation, und die Zucker-oxidation. Unter Ihnen, DNA/RNA-Extraktion ist die am weitesten verbreitete Gebiet der Glyoxylsäure, Glyoxylsäure, gemischt mit isopropyl-Alkohol/chloroform wird in form der DNA - /RNA-Fällung, so extrahieren Sie die Nukleinsäure in der Probe, ist eines der am häufigsten verwendeten Nukleinsäure-Extraktion Methoden.

Glyoxylsäureals compound weit verbreitet in der Lebensmittel -, Pharma -, Kosmetik-und life-science-Bereichen, können Sie nicht nur Säure-agent, sondern haben auch antibakterielle, Verringerung der Umweltverschmutzung, antibakterielle und andere Funktionen, aber auch im Bereich der Biologie zu erkunden, Glyoxylsäure mehr umfangreiche Anwendung Aussichten.

Dimethyl Sulfon ist eine organische sulfide mit die molekulare Formel C2H6O2S, die unerlässlich für die Synthese von Kollagen im menschlichen Körper. MSM findet sich in der menschlichen Haut, Haare, Nägel, Knochen, Muskeln und verschiedenen Organen, und die menschlichen Körper, verbraucht 0.5 mgMSM pro Tag, und wenn es mangelhaft ist, es zu gesundheitlichen Beschwerden oder Krankheiten.

英文名称：Dimethyl Sulfon；男同性恋者；甲基磺酰甲烷

CAS: 67-71-0

Molekulare Gewicht: 94.13

Molekulare Formel: C2H6O2S

Produkt Spezifikationen: 5-20 mesh, 20-40 mesh, 40-60 mesh, 40-80 mesh, 60-80 mesh, 60-100 mesh, 80-200 mesh, etc.

Physikalische und Chemische Eigenschaften: weißes, kristallines Pulver, löslich in Wasser, ethanol, Benzol, methanol und Aceton, leicht löslich in ether. Kaliumpermanganat kann nicht entfärbt werden bei Raum Temperatur, und starke Oxidationsmittel kann oxidieren dimethyl Sulfon in mesylate. Dimethyl Sulfon wässrige Lösung ist neutral. Bei 25 °C Mikro-sublimation, bis 60°C sublimation Geschwindigkeit ist beschleunigt, so dass die Trocknung von dimethyl Sulfon Produkte sollte durchgeführt werden unter niedrigen Temperatur Vakuum. MSM ist eine organische sulfide, die im menschlichen Körper gefunden und in gemeinsamen Getränken und Lebensmitteln wie Milch, Kaffee, Tee und grünem Gemüse. MSM ist ein weißes, geruchloses, wasserlösliches crystal. Biologisch, MSM ist nicht toxisch, wie Wasser und ist eine sehr sichere Substanz.

Produktion Prozess: Erhalten von dimethyl Sulfoxid oxidiert Wasserstoffperoxid. Der dimethyl Sulfoxid oxidiert mit Wasserstoffperoxid bei 140-145 ° C. Nach der Reaktion, das Dimethylsulfoxid wurde gekühlt und gefiltert zu erhalten, die roh weiß Nadel-wie Kristall. Nach der Raffination, Trocknung und Siebung, es ist ein fertiges Produkt.

Raffination Methode: in der Regel verwenden Aktivkohle Entfärbung, ion exchange Entsalzen, umkristallisation Lösungsmittel -, Vakuum-Trocknung, Sortierung, Veredelung, hinzufügen von Antistatikum, rutschig agent zu erfüllen die export Anforderungen.

Quelle: Dimethyl Sulfon erhalten werden können aus natürlichen oder synthetischen Quellen. Natürliche Quellen von dimethyl-sulfonen werden im Allgemeinen als zuverlässiger Qualität, da Sie nicht unter die Unsicherheiten eingeführt, um Prozesse und Chemische Synthese.

Transport und Lagerung: luftdicht, Feuchtigkeit-Beweis, feuerfest, UV-Schutz.

Was ist die Verwendung von dimethyl Sulfon?

Verwendet 1: Verwendet als eine stationäre Flüssigkeit für gas-Chromatographie -, aber auch für die Analyse von niedrigen hydroxyl -

Verwendung 2: Verwendet als organische Synthese von raw Materialien, hohe Temperatur, Lösungsmittel, Lebensmittelzusatzstoffe und Gesundheit Produkte Rohstoffe

3 verwenden: Verwendet als eine hohe Temperatur, Lösungsmittel für anorganische und organische Materialien, organische Synthese Rohstoffe, Lebensmittel Zusatzstoffe und Gesundheit Pflege raw Materialien können auch verwendet werden als gas-Chromatographie Feste Flüssigkeit (Temperatur 30℃, Lösungsmittel) und analytische Reagenzien.

Dimethyl Sulfon Produkt Anwendung Bereich:

Anwendung 1: Es kann zu beseitigen Viren, stärken Durchblutung, erweichen tissue, Linderung von Schmerzen, Stärkung der sehnen und Knochen, Ruhe Geist, verbessern die körperliche Stärke, pflegen Haut, Haare und beauty, Behandlung von arthritis, oral ulcer, asthma, Verstopfung, transport Blutgefäße, und entfernen Sie die Giftstoffe in den Magen-Darm-Trakt.

Anwendung 2: Dimethyl Sulfon kann verwendet werden als Lebensmittel und Futtermittel Additiv zu ergänzen organischer Schwefel Nährstoffe für Menschen, Haustiere und Vieh.

Anwendung 3: die Externe Nutzung kann machen die Haut glatt, die Muskeln geschmeidig, und kann reduzieren die Farbe Flecken, der vor kurzem als eine kosmetische Additiv-Dosierung erhöht.

Anwendung 4: In der Medizin, es hat eine gute Schmerzlinderung, Förderung der Wundheilung und für andere Funktionen.

Anwendung fünf: Ausgezeichnete penetrant in der pharmazeutischen Produktion.

Dimethyl Sulfon Aktion:

1.Dimethyl Sulfon können beseitigen Viren, stärken Durchblutung, erweichen tissue, Linderung von Schmerzen, Stärkung der sehnen und Knochen, Ruhe Geist, verbessern die körperliche Stärke, pflegen Haut, Haare und beauty, Behandlung von arthritis, oral ulcer, asthma, Verstopfung, transport Blutgefäße, und entfernen Sie die Giftstoffe in den Magen-Darm-Trakt.

2.Dimethyl Sulfon kann verwendet werden als Lebensmittel und Futtermittel Additiv zu ergänzen organischer Schwefel Nährstoffe für Menschen, Haustiere und Vieh.

3. Dimethyl Sulfon die externe Nutzung kann machen die Haut glatt, geschmeidig Muskeln, und kann reduzieren die Farbe Flecken, der vor kurzem als eine kosmetische Additiv-Dosierung erhöht.

4. Dimethyl Sulfon in der Medizin, es hat eine gute Analgesie, die Wundheilung fördern und andere Funktionen.

5. Dimethyl Sulfon ausgezeichnete penetrant in die Herstellung von Drogen.

过去，由于医学知识落后和条件有限，人们对牙齿保护的意识很少，很多人不明白为什么要保护牙齿。牙齿是人体最坚硬的器官。它们用来咬、咬和磨碎食物，并帮助发音。人的前牙有撕裂食物的作用，后牙有研磨食物的作用，食物经过充分咀嚼后有利于胃的消化吸收。所以，如果牙齿不好，就很有可能影响到我们的肠胃问题。

Darüber hinaus sind die Zähne nicht gut, aber auch Schmerzen verursachen, wie das Sprichwort sagt: "Zahnschmerzen ist keine Krankheit, es wirklich weh tut", denn unsere Zähne sind dicht bewachsen mit Wurzeln von der gleichen zahn-Nerven-Schmerzen, die durch diese dichten kleinen zahn-Nerven-übertragung. Ein weiterer Punkt kann nicht ignoriert werden, schlechte Zähne wird auch einen schlechten Atem, ernsten Menschen beeinflussen zwischenmenschliche Kommunikation, so ist es sehr wichtig, schützen Sie Zähne!

Wie kann ich verhindern, dass meine Zähne und Zahnfleisch gesund zu erhalten?

Es ist nicht schwer zu halten Sie Ihren Mund sauber, gesund und im Einklang. Nach einem einfachen täglichen routine kann helfen, verhindern, dass die meisten Zahnprobleme: verwenden Sie Fluorid-Zahnpasta, die Zähne putzen Letzte Sache in der Nacht und mindestens einmal während des Tages, Pflegen Sie eine gute Ernährung, reduzieren Sie die Anzahl der zuckerhaltigen Lebensmitteln und Getränken, die Sie Essen, und besuchen Sie Ihren Zahnarzt regelmäßig.

Obwohl die meisten Menschen putzen Ihre Zähne regelmäßig, einige Leute gehen Sie nicht zum Zahnarzt für regelmäßige check-ups. Ein paar kleine Veränderungen in Ihre tägliche Gewohnheiten, die einen großen Unterschied machen können im Laufe der Zeit. Eine zahnärztliche team kann entfernen Sie angesammelten Zahnstein und Zahnstein von den Zähnen und Behandlung von bestehenden Zahnfleischerkrankungen. Jedoch, die tägliche Zahnpflege ist bis zu Ihnen, und die wichtigsten Waffen sind Ihre Zahnbürste und Zahnpasta.

Wie wählen Sie die richtige Zahnpasta? Unter den anti-Karies Zahnpasta, Natriumfluorid und Natriummonofluorphosphat sind repräsentativ Zutaten. Es gibt auch stannous Fluorid und so weiter, die sind verwendet in einer fluoridhaltigen Zahnpasta. Solange der Fluorid-Gehalt in der anti-Karies-Zahnpasta erreicht 1/1000, es kann effektiv verhindern Karies. In der Fall der gleichen Fluoridgehalt, die anti-Karies-Wirkung der beiden Komponenten ist theoretisch ähnlich, so dass aus der Sicht der Karies-Prävention zu wählen, die zwei Möglichkeiten sind die gleichen. Ausgehend von der whitening-Effekt. Phosphat Komponenten können kombiniert werden mit calcium-Ionen in dental Steine, die kann effektiv reduzieren die Bildung von dental Steine, so wie zu erreichen die Wirkung der Zahnaufhellung. Natriummonofluorphosphat ist ein wenig stärker aufhellen von Zähnen.

Derzeit in einigen Supermärkten, die meisten Sorten von Zahnpasta sind mit Fluorid-Zahnpasta oder Natriummonofluorphosphat in der Wirkstoff. So ist Natriummonofluorphosphat gut für Ihre Zähne?

Natriummonofluorphosphat (SMFP) ist eine Chemische Substanz, weißes Pulver oder weißes Kristall, leicht löslich in Wasser, stark hygroskopisch, bei 25° Wasser-Auflösung ist, keine Nebenwirkungen und keine Korrosion. Natriummonofluorphosphat für die Zahnpasta-Industrie ist verwendet als anti-Karies-agent, Desensibilisierung Additiv, und auch verwendet als Bakterizid und Konservierungsmittel in Zahnpasta Verarbeitung. Der herkömmliche Inhalte in Zahnpasta ist 0,7-0,8% und die konventionelle Fluor im Trinkwasser ist 1.0 mg/L wässrigen Lösung von Natriummonofluorphosphat hat offensichtlich bakterizide Wirkung. Es hat offensichtliche hemmende Wirkung auf melanosomin, staphylococcus aureus, Salmonellen und so weiter.

Fluorid kann angewendet werden in eine Vielzahl von Möglichkeiten in der Zahnheilkunde. Zusätzlich zu fluorierten Produkte für die tägliche orale hygiene, wie Zahnpasta und Mundwasser, gibt es spezielle zahnärztliche Behandlungen, die in form von gelen und-Lacken, die unter anderem beim Zahnarzt. Der häufigste Weg ist die Anwendung von Fluorid topisch durch Bürsten Ihre Zähne täglich mit Fluorid-Zahnpasta schützt den Zahnschmelz vor Bakterien in Ihrem Mund. Es ist wichtig, die Verwendung von Fluorid-Zahnpasta in Ihre täglichen Bürsten aus der kindheit. In diese Weise, die Zähne zu genießen eine bessere Gesundheit und Schutz in Ihr Leben, reduziert das Risiko von Karies und anderen oralen Erkrankungen.、

Im Laufe der Jahre hat sich die Welt, studierte die anti-Karies-Wirkung von Natriummonofluorphosphat verwendet in Zahnpasta und seiner Toxizität für den menschlichen Körper, obwohl nach wiederholter Forschung und vielen Debatten, die endgültige Schlussfolgerung ist, dass Natriummonofluorphosphat ist sicher für den menschlichen Körper in die anti-Karies-Aspekt und kann verwendet werden mit Frieden des Geistes.

Die Mid Autumn Festival and National Day 2023 nähern. Nach Angaben des Unternehmens die Urlaubsregelung, informieren wir Sie hiermit von der Firma Urlaub Fragen wie folgt:

We are currently celebrating the National Day holiday from September 29th to October 6th. We will return to the office on October 7th

Wenn Sie Fragen haben, hinterlassen Sie bitte eine Nachricht und ich werde Antworten, wenn ich zurück ins Büro.

Wenn Sie Fragen über das Produkt, bitte lassen Sie mich wissen, die Produkt name, CAS, Menge und Ziel-port.

Of course, you can also add my WhatsApp: 008618653132120 to get in touch with me faster! Thank you very much for your continued cooperation with us.

Unilong jeder, happy Mid Autumn Festival and National Day, und eine glückliche und gesunde Familie!

Ethyl-methyl-Carbonat ist eine organische Verbindung mit der chemischen Formel C5H8O3, auch bekannt als Exchange-Verwaltungskonsole. Es ist eine farblose, transparent, und flüchtige Flüssigkeit mit niedriger Toxizität und Volatilität. EMV-wird Häufig als Rohstoff in den Bereichen wie Lösungsmittel, Lacke, Kunststoffe, Harze, Gewürze und Medikamente. Es kann auch verwendet werden, um vorzubereiten, andere organische verbindungen, wie Polycarbonat. In der industriellen Produktion, die Produktion von EMV-in der Regel nimmt ester Austausch Reaktion oder Kohlensäure Veresterung Reaktion.

Produkt-name：Ethyl-methyl-Carbonat
CAS：623-53-0
Molecular formula：C4H8O3
EINECS：433-480-9
Anwendung: Weit verbreitet in Handys, tragbaren audio-visuelle Ausrüstung, notebook-Computer und andere hohe-Ende elektrische Geräte, ist derzeit der vielversprechendste kleinen Sekundär-Batterie-Elektrolyt-Lösungsmittel.

Die nachgeschaltete Anwendung Bereich EMV ist vor allem lithium-Ionen-Batterie-Elektrolyten, die eine der vier wichtigsten Materialien von lithium-Ionen-Batterien und anschaulich bezeichnet als das "Blut" von Batterien.

EMC ist unterteilt in zwei Kategorien, gemäß Reinheit: industrial grade, methyl-ethyl-Karbonat (99.9%) und Batterie grade EMC (99,99% oder höher). Industrial grade EMC ist hauptsächlich verwendet in der industriellen organischen Synthese und Lösungsmittel; Die Batterie grade EMC-Prozess erfordert höhere Anforderungen und wird vorwiegend als Lösungsmittel für lithium-Ionen-Batterie-Elektrolyten. Durch seine geringe Sterische Behinderung und Asymmetrie in der Struktur, es können helfen erhöhen die Löslichkeit von lithium-Ionen, Verbesserung der Kapazität Dichte und Ladung der Batterie, und hat sich zu einem der fünf wichtigsten Lösungsmittel für lithium-Ionen-Batterie-Elektrolyten.

Die nachgeschaltete Anwendung Bereich EMV ist vor allem lithium-Ionen-Batterie-Elektrolyten, die eine der vier wichtigsten Materialien von lithium-Ionen-Batterien und anschaulich bezeichnet als das "Blut" von Batterien. In den letzten Jahren, mit der rasanten Entwicklung der neue Energie-Fahrzeug-Industrie, Chinas lithium-Ionen-Batterie-Elektrolyt-Industrie hat in eine Periode der schnellen Entwicklung. Die Lokalisierung rate von Elektrolyten hat sich deutlich erhöht, und die import-substitution wurde im wesentlichen erreicht, treibt das rasante Wachstum der Nachfrage nach EMC in China Markt. Nach dem "2023-2027 China EMV-Industrie-Markt in der Tiefe der Forschung und die Perspektiven der Entwicklung-Prognose-Bericht", herausgegeben von der Xinsijie Industry Research Center, im Jahr 2021, die Nachfrage nach EMV-in China war 139500 Tonnen, ein Jahr-über-Jahr Zunahme 94,7%.

Der Markt für EMC hat gezeigt, dass eine stetige Entwicklung in den letzten Jahren. Dies ist vor allem aufgrund der weit verbreiteten Verwendung von EMC in verschiedenen industriellen Anwendungen, wie zum Beispiel Lösungsmittel, Beschichtungen, Kunststoffe, Harze, Gewürze und Medikamente. Darüber hinaus mit der Entwicklung der globalen Wirtschaft und der Verbesserung des Lebensstandards der Menschen, die Nachfrage für die EMV ist auch die schrittweise Erhöhung.

Derzeit, die wichtigsten consumer-Regionen EMC-Markt unter anderem die Asien-Pazifik-region, Europa und Nordamerika. Die Asien-Pazifik-region ist die wichtigste abnehmerregion methyl-ethyl-Karbonat-Markt, mit China, Japan, und Südkorea sind die wichtigsten Produzenten und Konsumenten von EMC. Der Markt für EMV in Europa und Nordamerika ist auch allmählich wächst, mit Deutschland, dem Vereinigten Königreich, den Vereinigten Staaten und in Kanada werden die wichtigsten Verbraucher von EMC.

In die Zukunft, das Wachstum der EMV-Markt wird beeinflusst durch Globale wirtschaftliche und industrielle Entwicklung. Mit dem Aufstieg der Schwellenländer und kontinuierliche technologische Fortschritte, die Nachfrage nach EMC im Markt wird weiter wachsen. In addition, Umweltschutz und nachhaltige Entwicklung werden auch wichtige trends in der EMV-Markt, die Förderung der Produktion und Verwendung von EMV-werden umweltfreundlich und nachhaltig.

Hydrogenated rosin ist einer der Kolophonium modifizierte Produkte. Die konjugierten Doppelbindungen des abietic Harz Säuren im Harz sind teilweise oder vollständig gesättigt mit Wasserstoffgas unter einem Katalysator, bestimmte Temperatur und Druck.

Hydriertes Kolophonium ist ein wichtiger Kolophonium modifiziertes Produkt mit gute Sauerstoff Widerstand, geringe Sprödigkeit, hohe thermische Stabilität, Licht und Farbe. Hydrogenated rosin ist weit verbreitet in Branchen wie Klebstoffe, synthetische Gummi, Farben und Lacke, Druckfarben, Papierherstellung, Elektronik und Lebensmittel. Hauptsächlich verwendet in Gummi, Lebensmittel, Medizin, Elektronik, Papier Herstellung, Gebäude Materialien, etc.

Unilong bietet verschiedene Sorten von hydriertem Kolophonium, einschließlich premium-und die erste Klasse. Level 2, können ausgewählt werden nach Ihren Bedürfnissen.

Was sind die Verwendungen von hydriertem Kolophonium?

Hydrogenated rosin ist oft verwendet als Weichmacher in der Klebstoff-Industrie für hot melt, Druck empfindliche, und gummiartige Kleber

In der Lack-Industrie, wie Automobil-Beschichtungen vorbereitet von tief hydriertes Kolophonium als Rohstoff

In der Lebensmittel Industrie, es kann verwendet werden als ein Kaugummi, matrix, um sicherzustellen, lange-term Lagerung ohne Verfärbung; Hydrogenated rosin kann auch verwendet werden, um Obst protective coatings.

In papermaking, hydriertes Kolophonium kann verwendet werden als high-grade Papier mit gute Wasser Widerstand und Licht Widerstand. In der pharmazeutischen Industrie, hydriertes Kolophonium kann verwendet werden als tackifier für Salben.

In der Kosmetik-Industrie, hydriertes Kolophonium kann verwendet werden als flüssige Lippenstift; In shampoo enthält hydriertes Kolophonium kann erhöhen Haar Glanz.

Wir sind nicht vertraut mit Kolophonium, so was ist der Unterschied zwischen hydriertes Kolophonium und Kolophonium? Wie sollten wir wählen diese beiden Produkte? Erste, werfen wir einen Blick auf die Unterschiede zwischen Ihnen.

Unterschiede in den Eigenschaften zwischen hydriertes Kolophonium und Kolophonium

Hydriertes Kolophonium, auch bekannt als demethylated Kolophonium, ist ein Produkt, erhalten durch Hydrierung Reaktion rosin nach der teilweisen Entfernung der methyl-Gruppen. Wegen der Zunahme der C-H-Bindungen im hydriertes Kolophonium, dieser Stoff hat eine bessere Stabilität und hohe Temperatur Widerstand, und der Schmelzpunkt ist auch relativ höher. Im Gegensatz zu gewöhnlichen Kolophonium enthält weitere methyl-Gruppen, so dass es anfällig für Verflüchtigung und Herstellung von Geruchsbelästigungen. Hydrogenated rosin hat relativ kein solches problem.

Unterschiede in der Verwendung von Hydriertem Kolophonium und Kolophonium

Aufgrund seiner hervorragenden Eigenschaften und Stabilität, hydriertes Kolophonium ist weit verbreitet in Bereichen wie Farben, Beschichtungen, Klebstoffen und Gummi. Rosin ist hauptsächlich verwendet in der Produktion von täglichen Notwendigkeiten wie Aromatherapie und Pixel, sowie in den Bereichen der traditionellen chinesischen Medizin und Kapseln in der pharmazeutischen Industrie.

Unterschiede in Produktion Methoden zwischen hydriertes Kolophonium und Kolophonium

Die Produktion von hydriertem Kolophonium erfordert die Entfernung von methyl-Gruppen und der Hydrierung Reaktionen, während rosin Produktion ist erhalten durch die Schritte, wie Extraktion, Destillation und Kühlung der Flüssigkeit Harz. Daher, die Produktion von hydriertem Kolophonium ist relativ Komplex.

Zusammenfassend, obwohl hydriertes Kolophonium und Kolophonium sind beide Produkte abgeleitet von Kiefer Harz gibt es erhebliche Unterschiede in Ihren Eigenschaften, Verwendungen und Herstellungsverfahren. In praktischen Anwendungen müssen die Menschen bei der Auswahl der passenden Produkte auf Basis der unterschiedlichen Bedürfnisse.

Unilong ist eine hohe-Qualität Hersteller in China. Unsere hydrogenated rosin ist einer der Kolophonium modifizierte Produkte. Während die Gewährleistung der Produkt Qualität, wir sind verpflichtet, Produkt innovation und bieten Sie mit die besten Produkte. Unsere service-Philosophie ist, dass wir nicht nur ein Hersteller, sondern auch partner Ihrer Produktion.

Natriummonofluorphosphatauch genannt als SMFP mit CAS-Nummer 10163-15-2, ist eine Fluor-enthaltende anorganische feine Chemische, eine ausgezeichnete anti-Karies-agent und zahn Desensibilisierung Agents. Es ist eine Art von weißes geruchloses Pulver, frei von Zeichen der Unreinheit. Es ist leicht löslich in Wasser und sehr hygroskopisch. Die Reinheit des SMFP kann 99% erreichen. Die molekulare Formel ist Na2PO3F und die molekulare Gewicht ist über 143.95. Als Quelle des Fluors, es ist sicherer als andere Fluorid Rohstoffe (wie Natrium-Fluorid).

Natriummonofluorphosphat ist weit verbreitet in Lebensmittel Zusatzstoffe, Zahnpasta, Metall Reiniger, spezielle Glas, Hautpflege, Kosmetik und anderen Bereichen. Im Bereich der Zahnpasta, Natriummonofluorphosphat ist hauptsächlich verwendet in der Produktion von Fluorid-Zahnpasta. Als eine kovalente Fluorid, Natriummonofluorphosphat wässrige Lösung hat offensichtlich bakterizide Wirkung, und es hat offensichtliche hemmende Wirkung auf Staphylococcus aureus, Salmonella, Aspergillus niger, etc. Natriummonofluorphosphat wird zerlegt werden durch Säuren oder Speichel Enzyme in der Mundhöhle, ist die Freigabe von Fluorid-Ionen, die reagieren mit Kristallen auf der Oberfläche des Zahnschmelzes bilden fluoroapatite, wodurch die zahn-Widerstand und Hemmung der Karies.

Natriummonofluorphosphat ist ein ausgezeichneter Ersatz für Natrium-Fluorid. Derzeit, Natriummonofluorphosphat hat im Grunde ersetzt Natriumfluorid in einigen Zahnpasta-Formulierungen. Zur gleichen Zeit, Natriummonofluorphosphat, hat auch gewisse Vorteile in der Konkurrenz mit stannous Fluorid.

In den letzten Jahren, wie die Einwohner zahlen mehr Aufmerksamkeit auf die Zahngesundheit, die Nachfrage auf dem Markt für Fluorid-haltige anti-Karies-Zahnpasta hat zugenommen, und die Nachfrage auf dem Markt für Natriummonofluorphosphat veröffentlicht wurde. Unilong ist der Marktführer in der Natriummonofluorphosphat-Industrie und einer der professionellen Hersteller von Natriummonofluorphosphat für die Zahnpasta-Industrie. Mit high-Qualität Produkte, Unilong etabliert hat lange-term Zusammenarbeit mit viele tägliche Chemische Unternehmen wie Colgate, Unilever, LG, etc. In Bezug auf die übersee Märkten, unsere Natriummonofluorphosphat Produkt wurde exportiert nach Thailand, Malaysia, Libanon, Indien und andere Regionen, und haben wir die Kraft, um zu konkurrieren mit internationalen Unternehmen, die im gleichen Bereich.

Als Lieferant von SMFPunten ist das, was wir für Sie tun können:
1.Wir nicht gesetzt die MOQ, für Kunden,also auch 1 kg ist ok.Wir können auch bieten kleine Probe Aufträge.
2..Kostenlose Probe sind verfügbar für Test
3.Unser Spediteur ist sehr Professionell. Sie können bieten vorteilhaft Versandkosten und können den export von überall auf der Welt gesund und sicher Lieferung.

Wenn Sie interessiert sind in unsere Produkt, willkommen zur Anfrage, Probe und eine Bestellung aufgeben!

Kaliumiodidein futterzusatz, ist eine Ionische Verbindung, in der JOD-Ionen kann form eine dunkelgelbe Niederschlag von Silberjodid mit Silber-Ionen (siehe Foto Zersetzung, die verwendet werden können, zu machen high-speed fotografische Filme). Daher Silbernitrat kann verwendet werden, um test die Anwesenheit von JOD-Ionen. JOD als Bestandteil von Thyroxin, ist eng mit den grundlegenden Stoffwechsel von Vieh und Geflügel, die Teilnahme an fast allen material-Stoffwechsel-Prozesse. Jodmangel in der Tierhaltung kann die Ursache für die Schilddrüsen-Hyperplasie und Hypertrophie, verringern Sie die grundlegende metabolische rate, und beeinträchtigt Wachstum und Entwicklung. JOD Hinzugefügt werden muss, um das Futter der Jungen Tiere und Tierische JOD-Mangel-Gebieten. Ertragreiche Milchkühe und Legehennen auch eine Erhöhung benötigen, in JOD und JOD Hinzugefügt werden muss, um Ihren feed.

Was ist die Anwendung von Kalium Iodid

Anti-Strahlung Wirkung: Verschiedenen Ländern verteilen oder reservieren JOD-Tabletten, um die Bewohner rund um Kernkraftwerke, der Hauptbestandteil von denen ist Kaliumiodid. Im Falle von Strahlung Leckage aus Kernkraftwerken durch Katastrophen, so dass die umliegenden Bewohner zu nehmen JOD-Tabletten sättigen JOD in der Schilddrüse und reduziert die absorption von radioaktiver Chemicalbook JOD-131 in der Schilddrüse. Jedoch, es ist notwendig, es innerhalb von 4 Stunden, wenn ausgesetzt, um freie JOD-Strahlung einen Effekt haben, und es kann nicht verhindern, dass freie Strahlung und Isotopen andere als JOD-131. Unsachgemäße Verwendung von gewöhnlichen Menschen ohne Anweisungen kann dazu führen, dass Symptome von Hyperthyreose.

Kaliumiodid ist ein Rohstoff für die Herstellung von JOD und Farbstoffe. Benutzt als lichtempfindliche Emulgator für die Fotografie. In Medizin, es wird als schleimlösend, harntreibend, Kropf Vorbeugung und Behandlung Agenten, als auch als pre-operative Medikamente für Hyperthyreose. Es ist auch verwendet in die Produktion von rheumatischen Schmerzmittel mit schmerzstillenden und Blut aktivierenden Wirkungen. Es ist ein co-Lösungsmittel für JOD und gewisse unlösliche Metall-JOD.

Unilong supply Kaliumiodid

Produkt-name：Kaliumiodid

CAS：7681-11-0

EINECS：231-659-4

Molecular formula：KI

Grade: Industrial grade, medizinische grade, AR

Sodium dodecylbenzenesulphonate (SDBS), anionisches Tensid, ist eine grundlegende Chemische Rohstoff, weit verbreitet in der täglichen chemischen Industrie.

Sodium dodecylbenzenesulphonate ist eine solide, weiß oder Licht gelb Pulver. Löslich in Wasser, leicht zu absorbieren Feuchtigkeit verklumpen. Natrium dodecyl Benzol Sulfonat hat stabile Chemische Eigenschaften alkali, verdünnter Säure und hartes Wasser, und können schaffen ein ausgewogenes system, das mit einer starken Säure. Die verzweigtkettigen Natrium dodecyl Benzol Sulfonat ist schwer biologisch abbaubar, während die straight-chain-Natrium dodecyl Benzol Sulfonat ist leicht biologisch abbaubar.

Waschen Wirkung

Sodium dodecylbenzenesulphonate ist ein chemisch neutral, die ist empfindlich auf Wasser Härte, nicht leicht zu oxidieren, stark schäumende Kraft, hohe Reinigungsmittel, leicht zu mischen mit verschiedenen Hilfsorganisationen, low-cost, Reifen Synthese-Prozess, und die Breite Palette von Anwendungen. Es ist eine sehr gute anionische Tenside.

Dispergiermittel Emulgator

Sodium dodecylbenzenesulphonate, als anionisches Tensid, hat eine gute Oberfläche Aktivität und starke Hydrophilie, die kann effektiv reduzieren die Spannung an der öl-Wasser-Schnittstelle und erreichen emulgieren. Daher, Sodium dodecylbenzenesulphonate wurde weit verbreitet in die Vorbereitung von Emulsionen wie zum Beispiel Kosmetik -, Druck und färben Hilfskräfte und Pestizide.

Antistatikum

Sodium dodecylbenzenesulphonate kann machen, Stoffe, Kunststoffe und andere Oberflächen in der Nähe von Wasser, während die Ionischen Tensid hat eine leitende Wirkung, so kann es durch elektrostatische Leckage in der Zeit, wodurch die Gefahr und die Unannehmlichkeiten verursacht durch statische Elektrizität.

Verwendet als Waschmittel und Textil-Zusatzstoffe, auch als Zahnpasta Schaummittel, mine fire extinguishing agent, emulsion Polymerisation Emulgator, Wolle Reinigung agent, etc.

Verwendet als anionische Oberfläche Aktivator, Emulgator und Treibmittel

GB2760-96 wird angegeben als verarbeitungshilfe für die Lebensmittel-Industrie. Schaummittel; Emulgator; Anionische Tenside. Verwendet in Kuchen, Getränke, Eiweiß, frischem Obst, Saft, Getränke, Speiseöl und so weiter.

Verwendung als Emulgator für Medikamente, Kosmetika und synthetische Harze. Zahnpasta, Treibmittel für Feuerlöscher. Verwendet als Waschmittel für Seide und Wolle feinen Stoffen. Flotation agent for metal beneficiation.

Als Wasch-und textilhilfsmittel, auch als Zahnpasta-Treibmittel -, Feuer-Lösch-Schaum Flüssigkeit, emulsion Polymerisation Emulgator, Pharma emulgieren, Dispergieren Schafe.

Biochemische Analyse, Elektrophorese, ion-pair Reagenzien.

Sodium dodecylbenzenesulphonate produziert von Unilong Branche eine hervorragende anionischen Tensid mit einer niedrigen Kosten, reifer Synthese-Prozess und Breite Anwendung Bereichen. Willkommen zu kaufen und zu konsultieren.